Archeage

Resolution Scaling

The measured frames per second across resolutions reveal a clear pattern for Archeage when paired with the Intel Core i5-13400F and AMD Radeon RX 7600. At 1920x1080 with High settings, the combo produces 80.5 FPS. Moving to 2560x1440 at the same preset drops the average to 51.2 FPS, a reduction of roughly 36 percent. At 3840x2160, the High preset yields 31.7 FPS, which is about 61 percent lower than the 1080p result.

The scaling behavior differs by preset. On Low settings, the transition from 1080p to 1440p sees a drop from 131 FPS to 88.3 FPS, while 4K Low lands at 48.8 FPS. The Medium preset follows a similar trajectory: 118.5 FPS at 1080p, 80.8 FPS at 1440p, and 44.8 FPS at 4K. The Ultra preset shows the steepest absolute declines, starting at 56 FPS on 1080p, falling to 37.8 FPS at 1440p, and reaching just 24 FPS at 4K.

These numbers indicate that the graphics card becomes the limiting component as resolution climbs. The RX 7600, with its 8 GB of GDDR6 memory on a 128-bit bus, delivers a bandwidth of 288.0 GB/s. The data shows that even at 1440p, only the Low preset exceeds 60 FPS, suggesting that maintaining smooth gameplay at higher resolutions requires turning down settings. At 4K, no preset reaches 60 FPS, with Ultra falling below 30 FPS, which points to a hard ceiling for this GPU in this title.

The gap between Low and High at 1080p is 50.5 FPS, but at 4K that same gap narrows to 17.1 FPS. This compression of performance differences at higher resolutions is typical when the GPU saturates, meaning the CPU headroom is not the primary constraint in those scenarios. Conversely, the larger deltas at 1080p suggest that the i5-13400F can feed the GPU adequately, allowing settings to have a more pronounced effect on frame rates.

GPU Role

The AMD Radeon RX 7600 operates with a base clock of 1720 MHz and a boost clock of 2655 MHz, with a game clock rated at 2250 MHz. The memory runs at 2250 MHz with 18 Gbps effective throughput. These clock figures, combined with the 2048 shading units and 64 ROPs, produce a pixel rate of 169.9 GPixel/s and a texture rate of 339.8 GTexel/s.

In Archeage, the GPU's role is decisive for visual fidelity. At 1080p Ultra, the card manages 56 FPS, which is playable but not consistently smooth for a fast-paced MMORPG. The High preset at the same resolution delivers 80.5 FPS, indicating that the card has enough headroom to handle most combat scenarios. The 8 GB VRAM capacity is sufficient for this 2014-era title, as the game's asset complexity does not appear to exceed that allocation at any tested setting.

The RX 7600's benchmark scores place it in the 63rd percentile among all GPUs. Its average benchmark score of 20258 is closely matched by the RX 7600 XT with a deltaPct of 0.6 percent, and the RX 460 with 0.8 percent. Interestingly, the RTX 3070 Mobile trails by 1.3 percent, and the Intel Arc B570 by 1.5 percent. This tight clustering shows that the card's performance in synthetic tests is competitive with those models, though the in-game results for Archeage will depend more on driver optimization and the game's engine.

The measured FPS at 4K Ultra (24 FPS) versus 4K Low (48.8 FPS) demonstrates that the GPU's raw throughput is the limiting factor at high pixel counts. The card's FP32 compute of 21.75 TFLOPS and 32 RT cores do not translate into playable 4K performance for this title at higher presets. The data suggests that users targeting 60 FPS should stay at 1080p for Medium or High settings.

Settings Recommendations

Based on the measured rows, the optimal experience balances frame rate with visual quality. At 1920x1080, the High preset delivers 80.5 FPS, which is well above the threshold for smooth MMORPG play. The Medium preset offers 118.5 FPS, a substantial margin that could be useful in crowded areas or large-scale battles where frame drops are common. Low at 1080p reaches 131 FPS, but the visual compromise is significant for a game that relies on environmental detail.

For 2560x1440, the Low preset achieves 88.3 FPS, making it the only 1440p option that clears 60 FPS comfortably. Medium at 1440p produces 80.8 FPS, which is also playable, but High drops to 51.2 FPS, introducing potential stutter in busy scenes. At 4K, the Low preset's 48.8 FPS is the highest achievable, but it still falls short of a consistent 60 FPS experience.

The data indicates that the best overall experience is 1080p High, as it provides a strong visual presentation with 80.5 FPS. For users with 1440p monitors, Medium at 80.8 FPS offers a reasonable compromise, though the 1080p High will look sharper due to higher pixel density at the native resolution. Ultra settings are not recommended at any resolution, as they produce 56 FPS at 1080p and 24 FPS at 4K, with the performance cost outweighing the marginal visual gains.

FAQ

Q: Can this combo run Archeage at 4K with playable frame rates?

A: No preset at 3840x2160 reaches 60 FPS. The highest 4K result is Low at 48.8 FPS, while High sits at 31.7 FPS and Ultra at 24 FPS.

Q: What is the frame rate difference between Low and Ultra at 1080p?

A: At 1920x1080, Low averages 131 FPS while Ultra averages 56 FPS, a difference of 75 FPS. The Medium preset is closer to Low at 118.5 FPS.

Q: How does the RX 7600's performance compare to its nearest rivals?

A: The RX 7600's average benchmark score of 20258 is within 0.6 percent of the RX 7600 XT, 0.8 percent of the RX 460, and trails the RTX 3070 Mobile by 1.3 percent and the Arc B570 by 1.5 percent.

Q: Is the CPU or GPU the bottleneck at 1440p High?

A: The 51.2 FPS result at 2560x1440 High, combined with the GPU's 63rd percentile ranking, suggests the graphics card is the limiting factor. The CPU's 82nd percentile ranking indicates it has headroom to spare.

Q: What is the best preset for a 60 FPS target at 1440p?

A: The Low preset at 88.3 FPS is the only 1440p option that exceeds 60 FPS. Medium at 80.8 FPS also qualifies, while High at 51.2 FPS does not.

Q: Does the game's release date affect the expected performance?

A: Archeage was released on 2014-01-14, and the data shows it runs well on modern hardware. The RX 7600's 8 GB VRAM is more than adequate for this title's requirements, as evidenced by the playable frame rates at 1080p Medium and High.

How This Combo Ranks

The Intel Core i5-13400F and AMD Radeon RX 7600 combination ranks 1141 out of 1727 tested combos in Archeage. This places the pairing in the lower-middle portion of the database, reflecting the GPU's limitations at higher resolutions. The rank is driven primarily by the RX 7600's performance ceiling, as the CPU is a strong performer in its own right.

The i5-13400F sits in the 82nd percentile of all CPUs, with an average benchmark score of 25236. Its nearest rivals include the Intel Core i7-13620H with a deltaPct of 0.1 percent, the AMD Ryzen 5 5600X3D at -0.5 percent, the AMD EPYC 9474F at 0.5 percent, and the AMD Ryzen AI 5 PRO 340 at 0.5 percent. These tight margins show that the CPU is well-matched against its peers, and it is not the source of the combo's middling rank.

The RX 7600, by contrast, sits in the 63rd percentile of GPUs, which drags the overall combo ranking down. The measured FPS data confirms this: at 4K Ultra, the combo produces only 24 FPS, which is a poor result for any modern pairing. At 1080p Low, the 131 FPS result is respectable, but the combo's inability to maintain high frame rates at higher presets limits its overall standing. The rank of 1141 out of 1727 suggests that while the combo is functional for 1080p gaming, it is not a top-tier solution for this MMORPG.

CPU Role

The Intel Core i5-13400F features 10 cores and 16 threads, with a base clock of 2.50 GHz and a boost clock of 4.60 GHz. It is built on the Raptor Lake architecture using a 10 nm process, and it supports DDR4 and DDR5 memory in a dual-channel configuration. The cache hierarchy includes 80 KB of L1 per core, 1.25 MB of L2 per core, and 20 MB of shared L3 cache.

In Archeage, the CPU's role is less prominent than the GPU's due to the game's age and the relatively modest demands of its engine. The measured FPS at 1080p Low reaches 131 FPS, which indicates that the CPU can drive high frame rates when the GPU is not the bottleneck. The single-thread performance, as shown by the 3dmark single-thread score of 960 and the Cinebench R23 single-core score of 3004, is strong enough for the game's primary logic thread.

The multi-threaded capabilities are also adequate, with a Cinebench R23 multi-core score of 21279 and a 3dmark max-threads score of 7307. These results place the CPU in the 82nd percentile, and its average benchmark score of 25236 is nearly identical to the Intel Core i7-13620H's 25201, with a deltaPct of 0.1 percent. This near-tie suggests that the i5-13400F offers comparable computational power to that mobile i7, which is notable for a desktop part.

The CPU's 65 W TDP and 10 nm process contribute to its efficiency, but the data does not show thermal throttling affecting Archeage performance. At 4K resolutions, the CPU has ample headroom, as the GPU becomes the clear limiting factor. The combination of strong single-thread and multi-thread scores means that the i5-13400F will not hold back the RX 7600 in this title, making the GPU the component to upgrade first for better frame rates.