Archeage

FAQ

Q: How does the AMD Ryzen 5 7600 compare to its closest rival in overall CPU benchmarks?

A: The Ryzen 5 7600 scores an average of 26,617 across all benchmark tests. Its nearest rival, the AMD Ryzen 7 5800X3D, scores 26,574, placing the 7600 just 0.2% ahead. The Intel Core i9-12900HK scores 26,672, which is 0.2% higher, so these three processors are effectively in a dead heat.

Q: What is the single-thread performance of the Ryzen 5 7600, and how does it compare to its multi-thread score?

A: In Cinebench R23, the 7600 scores 3,246 in single-core and 22,992 in multi-core. The multi-core result is roughly seven times higher, which aligns with the 6-core, 12-thread configuration. In PassMark, the single-thread score is 3,910, while the multithread score is 27,058.

Q: Where does the RTX 3070 rank among all GPUs, and what is its average benchmark score?

A: The RTX 3070 sits in the 72nd percentile of all GPUs, with an average benchmark score of 28,238. Its closest rival, the AMD Radeon RX 6600 XT, scores 27,985, meaning the RTX 3070 is 0.9% faster. The AMD FirePro S7150 scores 28,409, which is 0.6% ahead.

Q: What is the VRAM capacity of the RTX 3070, and what memory type does it use?

A: The RTX 3070 comes with 8 GB of GDDR6 memory on a 256-bit bus. Memory bandwidth is rated at 448.0 GB/s, with an effective memory clock of 14 Gbps.

Q: What is the best preset for 1440p gaming with this combo?

A: At 2560x1440, the Medium preset delivers 106.3 FPS average, while High drops slightly to 70 FPS. Medium is the clear choice for smooth play, as it stays well above 60 FPS. Low runs at 114.5 FPS, but the visual trade-off is unnecessary given Medium's headroom.

Q: How does this combo rank among all tested CPU-GPU combinations for Archeage?

A: The Ryzen 5 7600 paired with the RTX 3070 ranks 766th out of 1,727 tested combos in Archeage. This places it in the upper-middle tier of the database, indicating solid but not top-tier performance for this specific title.

Settings Recommendations

The measured data shows a clear pattern: Medium settings provide the best balance of visual quality and frame rate across all resolutions. At 1920x1080, Medium yields 157.9 FPS, which is only 10% lower than Low's 176 FPS but offers significantly better visuals. High drops to 105.2 FPS, still playable but a 33% reduction from Medium. Ultra falls to 73.6 FPS, which is acceptable for slower-paced MMO gameplay but not ideal for competitive scenarios.

At 2560x1440, Medium delivers 106.3 FPS, keeping the experience fluid. High runs at 70 FPS, which is just above the 60 FPS threshold for most displays. Ultra drops to 47.5 FPS, which is noticeable in fast-moving combat. Low runs at 114.5 FPS, but the visual downgrade is significant in a game that relies on environmental detail.

For 3840x2160, Medium is the only sensible choice, hitting exactly 60 FPS. High runs at 37.6 FPS, which is too choppy for an MMO, and Ultra falls to 28.3 FPS. Low runs at 69.6 FPS, which is serviceable but sacrifices too much fidelity. The data suggests that Medium at 4K is the sweet spot, while 1440p Medium and 1080p Medium offer the best overall experience.

GPU Role

The NVIDIA GeForce RTX 3070 is built on the Ampere architecture using the GA104 chip, fabricated on Samsung's 8 nm process. It has 5,888 shading units, 184 texture mapping units, and 96 raster output units. The GPU also includes 46 ray tracing cores and 184 tensor cores, which are not heavily leveraged by Archeage given its 2014 release.

Memory is a critical factor here. The 8 GB GDDR6 frame buffer on a 256-bit bus provides 448.0 GB/s of bandwidth. At 4K Ultra, the combo produces only 28.3 FPS, suggesting the game's higher presets are pushing beyond what this VRAM capacity and bandwidth can handle efficiently. The drop from Medium to High at 4K is steep—from 60 FPS to 37.6 FPS—indicating that the GPU's memory subsystem becomes a bottleneck as texture detail increases.

The RTX 3070's base clock is 1500 MHz, boosting to 1725 MHz. The pixel rate is 165.6 GPixel/s and texture rate is 317.4 GTexel/s. FP32 performance is rated at 20.31 TFLOPS. These figures are more than adequate for a 2014-era MMO, but the data shows that at 4K Ultra, the GPU is clearly overworked. The 72nd percentile ranking among all GPUs reflects its position as a strong mid-range card, but not a flagship.

How This Combo Ranks

In the database of tested CPU-GPU combinations for Archeage, this pairing of the Ryzen 5 7600 and RTX 3070 ranks 766th out of 1,727. That places it in the 44th percentile of all tested combos, meaning over half of the configurations tested outperform it in this specific game.

This ranking is notable because both components individually sit in respectable percentiles—the CPU at 83rd and the GPU at 72nd. The combo's lower relative ranking suggests that Archeage's engine is not scaling well with this hardware combination, or that the game's optimization favors other pairings. The measured FPS data supports this: at 1080p High, the combo achieves 105.2 FPS, which is solid, but not exceptional given the hardware's raw capabilities.

The gap between the CPU's strong benchmark performance and the combo's mid-tier game ranking indicates that Archeage may be more dependent on GPU throughput than CPU compute. With the GPU ranking 72nd and the combo ranking 44th, there is a meaningful drop-off, suggesting other bottlenecks in the system or the game's engine limiting overall output.

CPU Role

The AMD Ryzen 5 7600 is a 6-core, 12-thread processor based on the Zen 4 architecture, codenamed Raphael. It runs on the AMD Socket AM5 platform with a base clock of 3.80 GHz and a boost clock of 5.10 GHz. The 65 W TDP is modest, and the processor is manufactured on TSMC's 5 nm process node.

Cache configuration includes 64 KB of L1 per core, 1 MB of L2 per core, and 32 MB of shared L3 cache. Memory support is DDR5 with dual-channel architecture, providing 83.2 GB/s of bandwidth. The CPU also features integrated Radeon Graphics, though the discrete RTX 3070 handles all rendering duties here.

Benchmark results show a strong single-thread performer. The Cinebench R23 single-core score of 3,246 is excellent, and the PassMark single-thread score of 3,910 ranks it in the 83rd percentile of all CPUs. Multi-thread performance is also robust, with Cinebench R23 multi-core at 22,992 and PassMark multithread at 27,058. The 3DMark scores scale well with thread count: 1,938 for 2 threads, 3,686 for 4 threads, 5,508 for 8 threads, and 6,499 for 16 threads, showing near-linear scaling up to 8 threads.

For Archeage, the CPU's strong single-thread performance is beneficial, as MMOs typically rely heavily on single-threaded game logic and draw calls. The 5.10 GHz boost clock ensures quick response in crowded areas, while the 12 threads handle background tasks and add-on processing without strain.

Measured FPS Breakdown

At 1920x1080, the lowest tested resolution, frame rates are uniformly high. Low preset delivers 176 FPS average, Medium drops to 157.9 FPS, High runs at 105.2 FPS, and Ultra falls to 73.6 FPS. The step from Medium to High is the largest single drop at 52.7 FPS, indicating a significant visual feature being enabled in the High preset.

Moving to 2560x1440, the pattern shifts. Low runs at 114.5 FPS, Medium at 106.3 FPS, High at 70 FPS, and Ultra at 47.5 FPS. The Medium-to-High gap widens to 36.3 FPS, and Ultra drops below 60 FPS for the first time at this resolution.

At 3840x2160, performance becomes more constrained. Low delivers 69.6 FPS, Medium hits exactly 60 FPS, High drops to 37.6 FPS, and Ultra bottoms out at 28.3 FPS. The scaling from Low to Ultra at 4K is steep: Ultra runs at just 40.7% of Low's frame rate.

Across all resolutions, the Medium preset provides the most consistent experience relative to the visual quality on offer. At 1080p, it delivers 157.9 FPS; at 1440p, 106.3 FPS; and at 4K, exactly 60 FPS. This consistency makes Medium the recommended preset for this combo, regardless of the display resolution.