Archeage

Archeage

AVERAGE FPS
87
good

This combination provides smooth gameplay with an average of 87 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 38 58 68
1440p QHD 49 73 104 120
1080p Full HD 72 107 153 175

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 68
3840x2160 Medium 58
3840x2160 High 38
3840x2160 Ultra 27
2560x1440 Low 120
2560x1440 Medium 104
2560x1440 High 73
2560x1440 Ultra 49
1920x1080 Low 175
1920x1080 Medium 153
1920x1080 High 107
1920x1080 Ultra 72

Archeage with AMD Ryzen 5 8400F + NVIDIA GeForce RTX 3070, In-Depth Analysis

The AMD Ryzen 5 8400F and NVIDIA GeForce RTX 3070 combination delivers a solid, if not spectacular, performance profile in Archeage. The data shows a pairing where the CPU’s strong multi-threaded capabilities support the GPU well, but the GPU becomes the primary bottleneck at higher resolutions and settings. This analysis breaks down the measured frames per second (FPS) to explain exactly how this combo behaves across different configurations.

FAQ

Q: What is the overall performance rank of this CPU and GPU combo in Archeage?

A: The combination ranks 772nd out of 1727 tested combos for this game. This places it in the upper-middle tier of all configurations, indicating a balanced but not top-tier setup for this specific MMORPG.

Q: How does the Ryzen 5 8400F compare to its closest rivals in general CPU benchmarks?

A: The CPU has an average benchmark score of 25064. Its nearest rival, the AMD Ryzen 7 2700X, scores nearly identically with a deltaPct of 0. The Ryzen 5 7500F is 0.3% slower, while the AMD Ryzen AI 5 PRO 340 and AMD EPYC 9474F are 0.1% and 0.2% slower, respectively. Performance is effectively tied with these processors.

Q: What is the single most demanding setting for this combo in Archeage?

A: The Ultra preset is by far the most demanding. At 1920x1080, it yields an average of 71.6 FPS, which is a significant drop from the 106.8 FPS seen on the High preset. The gap widens further at higher resolutions, with Ultra dropping to 27.1 FPS at 4K.

Q: Is the RTX 3070's 8GB VRAM a limiting factor in this game?

A: The data suggests the GPU's memory bandwidth and overall capability are the limiting factors at high settings, rather than a specific VRAM capacity issue. The massive FPS drop from Low to Ultra settings at the same resolution points to the GPU's compute and memory throughput being saturated, not just its storage capacity.

Q: What is the best resolution for a consistently playable experience?

A: At 2560x1440, the combo achieves over 100 FPS on Medium and Low presets and 72.5 FPS on High. This resolution provides a strong balance, avoiding the sub-60 FPS drops seen at 4K while offering a clearer image than 1080p.

Q: How does the RTX 3070's performance compare to its nearest rivals?

A: The GPU's average benchmark score is 28238. It is 0.9% faster than the AMD Radeon RX 6600 XT and 1% faster than the NVIDIA GeForce GTX 980 Ti. However, it is 0.6% slower than the AMD FirePro S7150 and 1.1% slower than the AMD Radeon R9 M295X.

GPU Role

The NVIDIA GeForce RTX 3070 is the decisive component in this pairing for Archeage. Its specifications from the FACT PACK—including 5888 shading units, 184 texture mapping units, and 96 raster operation pipelines—define its raw processing power. The GPU operates with a base clock of 1500 MHz and a boost clock of 1725 MHz, and it accesses 8 GB of GDDR6 memory across a 256-bit bus, providing a bandwidth of 448.0 GB/s.

The benchmark results show that this memory subsystem and compute capacity are heavily taxed by Archeage's higher settings. The difference between the Low and Ultra presets is stark. At 1920x1080, the average FPS falls from 175.3 on Low to 71.6 on Ultra, a reduction of over 100 FPS. This indicates that the Ultra preset introduces rendering loads that the GPU struggles to manage, despite the capable Zen 4 CPU.

The RTX 3070's performance relative to its peers is competitive. It is 0.9% faster than the AMD Radeon RX 6600 XT, a common competitor. It also outperforms the older NVIDIA GeForce GTX 980 Ti by 1%. While these deltas are small in synthetic benchmarks, the in-game data shows that the GPU's architecture is well-suited for the DirectX 12 Ultimate (12_2) API that Archeage can utilize, allowing for a significant performance swing based on settings.

Resolution Scaling

The measured FPS data reveals a clear scaling pattern as resolution increases, confirming the GPU as the primary bottleneck. Moving from 1920x1080 to 2560x1440 on the High preset, the average FPS drops from 106.8 to 72.5, a 32% decrease. This is a substantial hit, but the frame rate remains playable. The scaling from 2560x1440 to 3840x2160 (4K) is even more punishing. On the High preset, the FPS falls from 72.5 to 37.9, a 48% drop that pushes the experience below the 60 FPS threshold.

This pattern is consistent across all settings. On Medium, the FPS falls from 153.3 at 1080p to 104.2 at 1440p, and then to 57.9 at 4K. The Low preset is the only one that remains above 60 FPS at 4K, with an average of 67.8 FPS. The data suggests that the CPU (AMD Ryzen 5 8400F) is capable of feeding the GPU at lower resolutions, but as the pixel count increases, the RTX 3070's workload becomes the limiting factor. The 4K results, particularly on Ultra (27.1 FPS), indicate a scenario where the GPU is completely saturated.

Settings Recommendations

Based on the measured rows, the optimal settings depend heavily on the target resolution. For a 1080p display, the High preset offers an excellent experience with an average of 106.8 FPS. While the Medium preset is faster at 153.3 FPS, the High preset provides a better visual quality-to-performance balance. The Ultra preset should be avoided at this resolution, as it nearly halves the frame rate to 71.6 FPS for a modest visual gain.

At 2560x1440, the High preset is the best choice for a smooth experience, delivering 72.5 FPS. This is comfortably above the 60 FPS target. The Medium preset provides a significant headroom boost at 104.2 FPS, which is ideal for high-refresh-rate monitors. The Ultra preset is not recommended here, as it drops to 49.4 FPS, which may introduce stutter in a fast-paced MMORPG.

At 4K, the choices become more constrained. The Low preset is the only one that consistently clears 60 FPS, with an average of 67.8 FPS. The Medium preset is playable at 57.9 FPS, but it is close to the 60 FPS line. High and Ultra settings are not suitable for 4K gameplay with this combo, as they produce 37.9 and 27.1 FPS respectively, which would feel sluggish.

How This Combo Ranks

The comboRankInGame of 772 out of 1727 places this configuration in the 45th percentile of all tested systems for Archeage. This suggests it is a mainstream performer, not a high-end enthusiast setup. The ranking is a result of the balance between the CPU and GPU. The Ryzen 5 8400F, with its 6 cores and 12 threads, provides solid multi-threaded performance, as evidenced by its Cinebench R23 multicore score of 20851 and its 82nd percentile ranking among all CPUs.

However, the RTX 3070, while a strong card, is not at the top of the GPU hierarchy. Its 72nd percentile ranking among all GPUs and its average benchmark score of 28238 are good, but they are not exceptional. The pairing works well because the CPU does not bottleneck the GPU at most settings. The data shows that the GPU is the limiting factor, which means the Ryzen 5 8400F is doing its job by providing enough data throughput. This combo is a capable 1440p machine and a decent 1080p high-refresh-rate machine, but it falls short of being a 4K powerhouse.

Measured FPS Breakdown

The following data is derived directly from the measured FPS table for this specific CPU and GPU combination.

1920x1080:

  • Low: 175.3 FPS average. This represents the maximum performance ceiling of the combo at this resolution.
  • Medium: 153.3 FPS average. A small performance hit from Low, but still exceptionally smooth.
  • High: 106.8 FPS average. The recommended setting for a high-quality 1080p experience.
  • Ultra: 71.6 FPS average. A significant drop from High, showing the cost of the highest visual fidelity.

2560x1440:

  • Low: 120.2 FPS average. The only setting that maintains over 100 FPS at this resolution.
  • Medium: 104.2 FPS average. Still very smooth and a good option for competitive play.
  • High: 72.5 FPS average. The best balance of quality and performance for 1440p.
  • Ultra: 49.4 FPS average. Dips below the 60 FPS threshold, making it less desirable.

3840x2160 (4K):

  • Low: 67.8 FPS average. The only 4K setting that is comfortably playable.
  • Medium: 57.9 FPS average. Borderline playable, but may be inconsistent.
  • High: 37.9 FPS average. Not suitable for smooth gameplay.
  • Ultra: 27.1 FPS average. This is a slideshow and should be avoided.

Hardware Specifications

AMD Ryzen 5 8400F

Cores / Threads 6 / 12
Base Clock 4200 MHz
Boost Clock 4700 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 3070

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1725 MHz MHz
TDP 220 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 8400F + NVIDIA GeForce RTX 3070 in Archeage

Resolution Settings Avg FPS
3840x2160 Low 67.8
3840x2160 Medium 57.9
3840x2160 High 37.9
3840x2160 Ultra 27.1
2560x1440 Low 120.2
2560x1440 Medium 104.2
2560x1440 High 72.5
2560x1440 Ultra 49.4
1920x1080 Low 175.3
1920x1080 Medium 153.3
1920x1080 High 106.8
1920x1080 Ultra 71.6

Archeage with Ryzen 5 8400F + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with RTX 3070 + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with Ryzen 5 8400F + RTX 3070

Explore FPS benchmarks for other games using this same hardware combination.