Archeage

Benchmark data for Archeage is available for the AMD Ryzen 5 7500F paired with the NVIDIA GeForce RTX 3070. The measurements cover 1080p, 1440p, and 4K at Low, Medium, High, and Ultra settings, and the combination ranks 793 out of 1727 tested combinations. The following sections summarize resolution scaling, the role of the GPU and CPU, and where this pair sits in the benchmark database.

Resolution Scaling

The measured average frame rates decline steadily as resolution increases across every settings tier. At Low settings, the combo delivers 174.6 fps at 1080p, 117 fps at 1440p, and 66.7 fps at 4K. In Medium settings the corresponding results are 155.7 fps, 105.1 fps, and 59.2 fps. High settings produce 104.1 fps at 1080p, 69.6 fps at 1440p, and 39.7 fps at 4K. At Ultra, the values fall to 71.7 fps at 1080p, 47 fps at 1440p, and 26.7 fps at 4K.

These numbers make the resolution penalty clear. The 1080p Ultra result of 71.7 fps is slightly higher than the 4K Low result of 66.7 fps, meaning that for this configuration resolution has more impact on frame rate than moving from Ultra down to Low. At 1440p High, the average is 69.6 fps, which is close to the 4K Low result. The frame rate behavior across resolutions is smooth rather than erratic, suggesting the rendering load scales predictably with pixel count.

Within each resolution, the difference between Low and Ultra is also substantial. At 1080p, the spread runs from 174.6 fps down to 71.7 fps; at 1440p, from 117 fps down to 47 fps; at 4K, from 66.7 fps down to 26.7 fps. This spread indicates that graphics settings have a strong effect on the measured results, and the effect remains visible even at 4K. Since the frame rate drops consistently when resolution rises, the data points to the GPU as the limiting component as pixel output grows.

GPU Role

The GPU in this combo is an NVIDIA GeForce RTX 3070 with an Ampere GA104 chip manufactured on Samsung 8 nm. Its transistor count is 17,400 million and the die size is 392 mm². The GPU operates at a base clock of 1500 MHz and a boost clock of 1725 MHz. The memory subsystem uses 8 GB of GDDR6 on a 256-bit bus, with a 1750 MHz memory clock and 448.0 GB/s bandwidth. There are 5888 shading units, 184 texture units, 96 ROPs, 46 RT cores, and 184 tensor cores. The pixel rate is 165.6 GPixel/s, the texture rate is 317.4 GTexel/s, and FP32 throughput is 20.31 TFLOPS.

These specifications are directly relevant to the measured Archeage results. The lowest frame rate in the data set occurs at 4K Ultra, where the combo averages 26.7 fps. That is the only tested configuration below 30 fps. 4K High reaches 39.7 fps, while 4K Medium reaches 59.2 fps. At 1440p Ultra the GPU still achieves 47 fps, and at 1080p Ultra it reaches 71.7 fps. The shape of these results indicates that the RTX 3070 is well matched to 1080p and 1440p play in Archeage, while 4K Ultra places a heavier load on the GPU than it can sustain at high frame rates.

In aggregate GPU benchmarks, the RTX 3070 has an average score of 28238 and sits in the 72nd percentile of all GPUs. Its nearest rivals by average benchmark score are the AMD FirePro S7150 with an average score of 28409 and deltaPct -0.6, the AMD Radeon RX 6600 XT with 27985 and deltaPct 0.9, the NVIDIA GeForce GTX 980 Ti with 27956 and deltaPct 1, and the AMD Radeon R9 M295X with 28541 and deltaPct -1.1. This grouping places the RTX 3070 in a tight performance cluster. The Archeage data, however, is specific to this game and settings, so those rival positions do not directly determine the measured frame rates.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread desktop processor from the 7000 series, based on Zen 4 architecture (Raphael) and built on TSMC 5 nm. It has a base clock of 3.70 GHz, a boost clock of 5.00 GHz, a 65 W TDP, and 32 MB of shared L3 cache. The CPU supports DDR5 memory on a dual-channel bus with 83.2 GB/s bandwidth and uses PCIe Gen 5 from the CPU. Its transistor count is 6,570 million with a 71 mm² die size.

Synthetic CPU results show strong single-thread performance: 3218 in Cinebench R23 single-core, 974 in 3DMark single-thread, and 3841 in PassMark single-thread. Multi-thread results include 22799 in Cinebench R23 multi-core, 6379 in 3DMark max threads, and 26825 in PassMark multi-thread. The average benchmark score for this CPU is 24993, placing it in the 82nd percentile of all CPUs. The nearest CPU rivals include the Intel Core i7-11850H with an average score of 24974 and deltaPct 0.1, the AMD Ryzen 7 2700X with 25057 and deltaPct -0.3, the AMD Ryzen 5 8400F with 25064 and deltaPct -0.3, and the AMD Ryzen 9 6900HX with 24897 and deltaPct 0.4.

In Archeage, the CPU’s contribution is most visible at the low-resolution end of the data. The combo reaches 174.6 fps at 1080p Low, the highest average FPS recorded among the measured points. At 1440p Low it delivers 117 fps, and at 4K Low 66.7 fps. Since frame rate falls as resolution rises, the CPU is not the primary constraint at higher resolutions; the GPU does more work per frame as pixel count increases. At 1080p Ultra, the measured average of 71.7 fps shows that this six-core, twelve-thread processor is not preventing the GPU from producing playable frame rates in this game.

How This Combo Ranks

The Archeage database places this combo at rank 793 out of 1727 tested combinations. That position is near the middle of the field rather than at either extreme. The data is measured, not estimated, and includes frame rates for all three resolutions at Low, Medium, High, and Ultra settings.

To contextualize this rank, the CPU sits at the 82nd percentile among all CPUs and the GPU at the 72nd percentile among all GPUs. Both components are above-average in their respective pools, but the combo’s middle rank in Archeage shows that the game’s frame rate behavior does not simply mirror component averages. At 1080p High, the combo produces 104.1 fps; at 1440p High, 69.6 fps; at 4K High, 39.7 fps. At Ultra settings, the values are 71.7 fps, 47 fps, and 26.7 fps. These results show a configuration that is comfortable at 1080p, capable at 1440p, and heavily loaded at 4K Ultra.

The component-level rival data reinforces the mid-tier positioning. The RTX 3070’s average benchmark score is close to the AMD Radeon RX 6600 XT and the NVIDIA GeForce GTX 980 Ti, with deltaPct values of 0.9 and 1 respectively. The CPU sits close to the Intel Core i7-11850H and the AMD Ryzen 9 6900HX in average score, with deltaPct values of 0.1 and 0.4. The exact Archeage rank of 793 out of 1727 reflects the game-specific frame rate measurements rather than these synthetic averages, but the overall component tier is consistent with a result near the center of the database.

FAQ

Q: What is the average frame rate at 1080p Medium for this combo in Archeage?

A: The combo averages 155.7 fps at 1080p Medium.

Q: How does the RTX 3070’s 4K High result compare to its 1080p High result?

A: The combo averages 104.1 fps at 1080p High and 39.7 fps at 4K High.

Q: What memory configuration does the RTX 3070 use?

A: It uses 8 GB of GDDR6 on a 256-bit bus, with a 1750 MHz memory clock and 448.0 GB/s memory bandwidth.

Q: What rank does this combo hold in the Archeage database?

A: It ranks 793 out of 1727 tested combinations.

Q: What is the Ryzen 5 7500F’s core configuration?

A: It has 6 cores and 12 threads, with a base clock of 3.70 GHz and a boost clock of 5.00 GHz.

Q: Which components are nearest to the RTX 3070 by average benchmark score?

A: The nearest include the AMD FirePro S7150 with 28409, the AMD Radeon RX 6600 XT with 27985, the NVIDIA GeForce GTX 980 Ti with 27956, and the AMD Radeon R9 M295X with 28541.