Fivem

The Intel Core i5-13400F and NVIDIA GeForce RTX 3070 pairing in Fivem shows a predictable scaling pattern that clearly identifies the GPU as the primary bottleneck at higher resolutions. At 1080p, the combo delivers 217 FPS on Low settings, which drops to 169.1 FPS on Medium and 133.5 FPS on High. This progression from Low to High at 1080p represents a 38.5% performance reduction, indicating that the CPU has ample headroom to feed the GPU at these settings. The real story emerges at 4K, where the same Low-to-High comparison shows a much steeper decline: 76.8 FPS at Low, 59.9 FPS at Medium, and 50 FPS at High. The 4K Ultra setting bottoms out at 40 FPS, which is a 48.4% drop from the 4K Low result. This widening gap between settings as resolution increases points directly to the RTX 3070's 8 GB GDDR6 memory and 448.0 GB/s bandwidth being saturated by the higher pixel counts.

The scaling from 1440p to 4K is particularly telling. At High settings, the combo moves from 88.6 FPS at 1440p to 50 FPS at 4K, a 43.6% reduction. At Low settings, the drop is from 139.5 FPS to 76.8 FPS, a 44.9% reduction. The consistency of this percentage drop across settings suggests that the GPU is the limiting factor regardless of the quality preset. The CPU, with its 10 cores and 16 threads from the Raptor Lake architecture, is not the constraint here; its 3DMark max threads score of 7307 and Cinebench R23 multicore score of 21279 indicate strong multi-threaded performance that can handle Fivem's multiplayer workloads without becoming a bottleneck. The data shows that the i5-13400F's single-thread performance, evidenced by a 3DMark single thread score of 960 and Geekbench single-core score of 2301, is more than sufficient for this game's physics and simulation demands.

Resolution Scaling

The measured FPS data reveals a clear pattern: this combo is heavily GPU-bound at 4K and increasingly CPU-bound at 1080p. At 1080p Low, the 217 FPS result suggests the CPU is near its limit, as the GPU could likely render more frames if the processor could supply them. The i5-13400F's PassMark single thread score of 3634 and 3DMark 2 threads score of 1880 are adequate for Fivem's lightly-threaded game logic, but the 1080p Low ceiling of 217 FPS indicates that the CPU is the limiting component at this extreme. Moving to 1440p, the GPU begins to take over as the primary constraint. The 1440p Low result of 139.5 FPS is a 35.7% drop from 1080p Low, which is less than the pixel count difference (1.78x) would suggest, meaning the GPU still has some headroom at this resolution. At 4K, the GPU is unambiguously the bottleneck. The 4K Low result of 76.8 FPS versus the 1080p Low result of 217 FPS represents a 64.6% reduction, which closely tracks the 4x pixel increase when accounting for the CPU's inability to scale beyond its 217 FPS ceiling.

The Ultra preset scaling is even more dramatic. From 1080p Ultra at 106.2 FPS to 4K Ultra at 40 FPS, the drop is 62.3%. This steep decline at Ultra settings across all resolutions points to the combination of the RTX 3070's 8 GB VRAM capacity and the game's high-resolution texture demands. The GPU's pixel rate of 165.6 GPixel/s and texture rate of 317.4 GTexel/s are being fully utilized at 4K Ultra, where the 40 FPS result indicates the card is working at its maximum capacity. The 1440p Ultra result of 68.7 FPS is more playable but still shows the GPU struggling with the highest quality settings. The data suggests that Fivem at 4K is a GPU-heavy workload that this RTX 3070 can only handle at Low settings (76.8 FPS) with acceptable smoothness.

How This Combo Ranks

In the benchmark database, this specific combination of the Intel Core i5-13400F and NVIDIA GeForce RTX 3070 ranks 828 out of 1792 tested combos for Fivem. This places the combo in the 46.2nd percentile of all tested systems, meaning that roughly 46% of tested combos perform worse and 54% perform better. This mid-pack ranking is somewhat surprising given the individual components' performance percentiles. The CPU ranks in the 82nd percentile against all CPUs, while the GPU ranks in the 72nd percentile against all GPUs. The combo's ranking is dragged down by the fact that Fivem is a demanding multiplayer title that requires both strong CPU and GPU performance, and this pairing, while competent, does not excel in either area to push it higher in the overall standings.

The ranking becomes more understandable when examining the CPU's nearest rivals. The i5-13400F's average benchmark score of 25236 is nearly identical to the Intel Core i7-13620H, which scores 25201 with a delta of 0.1%. The AMD Ryzen 5 5600X3D scores 25365, representing a 0.5% advantage over the i5-13400F. These tiny deltas indicate that the CPU is in a crowded performance band where small differences in synthetic benchmarks do not translate into meaningful FPS differences in Fivem. The GPU's nearest rivals tell a similar story. The RTX 3070's average benchmark score of 28238 is within 1% of the AMD Radeon RX 6600 XT (27985, delta 0.9%) and the NVIDIA GeForce GTX 980 Ti (27956, delta 1%). This clustering means that the combo's 828th rank is more a reflection of the competitive landscape than any deficiency in the components themselves.

GPU Role

The NVIDIA GeForce RTX 3070 is the defining component in this combo's Fivem performance. With 8 GB of GDDR6 memory on a 256-bit bus, the card provides 448.0 GB/s of bandwidth. This memory configuration is adequate for 1080p and 1440p gaming but becomes strained at 4K with higher quality settings. The measured FPS data confirms this: 4K Ultra produces 40 FPS, while 4K High produces 50 FPS. The difference between these two settings is 10 FPS, which suggests that the Ultra preset is likely exceeding the VRAM capacity for some texture-heavy scenes, causing the GPU to rely on slower memory access patterns. The card's clock speeds are also relevant. The base clock of 1500 MHz and boost clock of 1725 MHz are modest by modern standards, but the 20.31 TFLOPS of FP32 performance and 5888 shading units provide substantial compute throughput. The 46 RT cores and 184 tensor cores are present but do not play a significant role in Fivem, which is not a ray-tracing-heavy title.

The GPU's PassMark G3D score of 22214 and 3DMark Steel Nomad DX12 score of 3162 place it in the 72nd percentile of all GPUs. This percentile ranking, combined with the measured FPS data, paints a picture of a card that is well-suited for 1080p and 1440p gaming but struggles to maintain high frame rates at 4K. The RTX 3070's 8 GB VRAM is the most likely culprit for the 4K performance degradation, as Fivem's open-world multiplayer environments can consume large amounts of memory for textures and geometry. The card's 165.6 GPixel/s pixel fill rate and 317.4 GTexel/s texture fill rate are sufficient for 1440p gaming, as evidenced by the 1440p High result of 88.6 FPS, but the 4K results show the GPU hitting its computational limits.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the target resolution. At 1080p, the High preset at 133.5 FPS offers an excellent balance of visual quality and performance. The Ultra preset at 106.2 FPS is also viable for players who prioritize image quality over raw frame rate, but the 20.5% drop from High to Ultra may not justify the visual improvement. The Medium preset at 169.1 FPS is the best choice for competitive play or high-refresh-rate monitors, as it provides a significant frame rate boost over High while still maintaining decent visual fidelity. At 1440p, the High preset at 88.6 FPS is the recommended sweet spot, as it delivers smooth gameplay on most 144Hz monitors. The Medium preset at 108.5 FPS is also a strong option, offering a 22.5% improvement over High with minimal visual compromise. The Ultra preset at 68.7 FPS is playable but falls below the 70 FPS threshold that many players consider minimum for smooth multiplayer action.

At 4K, the situation is more challenging. The Low preset at 76.8 FPS is the only setting that provides a consistently smooth experience, as it stays above 60 FPS. The Medium preset at 59.9 FPS is marginal, dipping below 60 FPS on average, which is noticeable in fast-paced multiplayer scenarios. The High preset at 50 FPS and Ultra preset at 40 FPS are not recommended for serious play, as the frame rates are too low for responsive gameplay in Fivem's multiplayer environment. The data shows a clear pattern: this combo is capable of high-refresh-rate gaming at 1080p, solid performance at 1440p, and only low-quality 4K gaming. Players with 4K displays should prioritize the Low or Medium preset to maintain playable frame rates, while 1440p and 1080p users have more flexibility to choose between visual quality and performance.

FAQ

Q: What is the best resolution to use with this combo in Fivem?

A: The measured data shows that 1440p High at 88.6 FPS provides the best balance of visual quality and performance. At 1080p, the combo achieves 133.5 FPS on High, while 4K High drops to 50 FPS, making 1440p the sweet spot.

Q: How does the RTX 3070's 8 GB VRAM affect 4K performance?

A: At 4K Ultra, the combo produces 40 FPS, and 4K High produces 50 FPS. The small difference between these settings suggests the 8 GB VRAM is saturated at higher quality presets, limiting performance regardless of the graphical details.

Q: Is the CPU or GPU the bottleneck at 1080p Low?

A: The 1080p Low result of 217 FPS indicates the CPU is the limiting factor at this setting. The i5-13400F's single-thread performance, with a 3DMark single thread score of 960, caps the frame rate before the GPU's full potential is reached.

Q: How does this combo rank compared to other tested systems in Fivem?

A: This combo ranks 828 out of 1792 tested combinations, placing it in the 46.2nd percentile. The CPU's 82nd percentile and GPU's 72nd percentile rankings are dragged down by the demands of Fivem's multiplayer workload.

Q: What settings should I use for competitive multiplayer at 1080p?

A: The Medium preset at 169.1 FPS is the best choice for competitive play, as it provides a significant frame rate advantage over High (133.5 FPS) while maintaining acceptable visual quality. The Low preset at 217 FPS offers the highest frame rate but with reduced visual fidelity.

Q: Is the RTX 3070's performance consistent with its benchmark score?

A: The GPU's PassMark G3D score of 22214 and 72nd percentile ranking align with the measured FPS data. The card performs well at 1080p and 1440p but struggles at 4K, which is consistent with its 8 GB VRAM and 448.0 GB/s bandwidth.