The Technomancer

Settings Recommendations

The measured frame rates for The Technomancer across the four settings presets and three resolutions reveal a consistent hierarchy: Low delivers the highest average FPS, followed by Medium, then High, with Ultra predictably at the bottom. At 1920x1080, the spread is substantial — Low averages 150 FPS, Medium 115 FPS, High 98 FPS, and Ultra drops to 77 FPS. This 73 FPS gap between Low and Ultra at 1080p indicates that the settings menu has a pronounced impact on GPU load, which is typical for an Action RPG from 2016 that leans heavily on rasterized effects rather than ray tracing.

For players targeting a smooth 60 FPS baseline, the Medium preset at 1080p is the sweet spot. It delivers 115 FPS average, which is 17 FPS above High and 38 FPS above Ultra, while still maintaining a comfortable margin over the 60 FPS threshold. The minimum FPS recorded for Medium at 1080p is 98, meaning even the worst-case frame dips stay well above 60, offering a consistent experience without stutter concerns. High at 1080p also clears 60 FPS with its 98 FPS average, but the lack of a reported minimum makes it riskier for users who are sensitive to frame-time spikes.

At 2560x1440, the same pattern holds but with tighter margins. Medium averages 75 FPS, High 64 FPS, and Low 98 FPS, while Ultra falls to 50 FPS, just below the 60 FPS target. For 1440p users, Medium is the recommended preset — it provides 75 FPS average with a 64 FPS minimum, ensuring that the experience stays fluid even during demanding combat sequences. High is playable at 64 FPS average, but the minimum is not reported, so users with 144Hz displays may prefer Medium for headroom. Ultra at 1440p is not advisable unless the user accepts sub-60 performance as a trade-off for visual fidelity.

At 3840x2160, the situation becomes more constrained. Medium averages 41 FPS with a 35 FPS minimum, High averages 35 FPS, Low averages 54 FPS, and Ultra drops to 28 FPS. None of these presets achieve 60 FPS at 4K, which suggests the RTX 5050 is not capable of delivering high-refresh 4K in this title. Low at 4K is the only preset above 50 FPS, but the visual compromise is significant. Medium at 4K, despite its 41 FPS average, offers a playable experience for cinematic pacing, though users seeking competitive responsiveness should consider lowering the resolution instead. The data indicates that Medium at 1080p or 1440p provides the best balance of frame rate and visual quality, while 4K is best reserved for Low or Medium with reduced expectations.

How This Combo Ranks

The combination of the AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 5050 achieves a rank of 1721 out of 2825 tested combos in The Technomancer. This places the pairing in the 39th percentile of all combos tested for this game, meaning roughly 61% of tested configurations outperform it. Given that the RTX 5050 is a budget-oriented GPU in the GeForce 50-series lineup, this mid-pack ranking is consistent with the hardware's positioning.

The combo rank reflects the GPU's performance ceiling more than the CPU's capabilities. The Ryzen 7 5800XT is a high-end desktop processor with an 81st percentile ranking against all CPUs, which suggests it is not the bottleneck in this configuration. The GPU, however, ranks at the 66th percentile against all GPUs, indicating that the RTX 5050 is the limiting factor in most scenarios. In a game like The Technomancer, which is not known for extreme CPU demands, the 8-core, 16-thread Ryzen 7 5800XT likely has ample headroom, while the RTX 5050's 8 GB VRAM and 128-bit memory bus constrain high-resolution performance.

When compared to other tested combos, this pairing's rank of 1721 out of 2825 implies that it sits in the lower-middle tier of configurations. The data shows that the RTX 5050's nearest rivals in synthetic benchmarks include the AMD Radeon RX Vega M GL (with a delta of -0.6%), the AMD Radeon HD 8970M (delta -1%), and the AMD Radeon RX 5600 XT (delta +1.6%). In practical gaming terms, this means the RTX 5050 performs similarly to a mid-range GPU from several years ago, which explains why the combo does not crack the top half of tested configurations in The Technomancer.

The ranking also suggests that users with higher-tier GPUs will see substantially better frame rates in this title. The 2825 combos tested likely include configurations with more powerful graphics cards that achieve significantly higher FPS at 4K Ultra, which the RTX 5050 cannot match. For players who own this specific combo, the expectation should be for playable 1080p and 1440p performance with moderate settings, rather than high-refresh 4K or maxed-out presets.

GPU Role

The NVIDIA GeForce RTX 5050 is built on the Blackwell 2.0 architecture using a 5 nm process TSMC process, with 16,900 million transistors on a 149 mm² die. This GPU features 8 GB of GDDR6 memory on a 128-bit bus, providing 320.0 GB/s of bandwidth. The base clock is 2317 MHz with a boost clock of 2572 MHz, and the memory runs at 2500 MHz (20 Gbps effective). These specifications position the RTX 5050 as a mainstream graphics card, and the benchmark results in The Technomancer reflect that positioning.

In The Technomancer, the GPU's VRAM capacity and memory bandwidth play a critical role in determining performance at higher resolutions. At 4K, the measured FPS drops significantly compared to 1080p, which is consistent with the 8 GB VRAM being a limiting factor. The game requires more memory bandwidth at higher resolutions to handle textures and geometry, and the 128-bit bus is a constraint. The data shows that at 4K Ultra, the combo only achieves 28 FPS average, while at 4K Low, it reaches 54 FPS. This 26 FPS difference between Ultra and Low at 4K highlights how much the GPU struggles when VRAM pressure increases.

The RTX 5050's boost clock of 2572 MHz is relatively high for a budget GPU, which helps at lower resolutions where the GPU is not memory-bound. At 1080p, the combo achieves 77 FPS at Ultra and 150 FPS at Low, indicating that the GPU's compute throughput is sufficient for 1080p gaming. However, as resolution increases, the memory bandwidth becomes the bottleneck. The 320.0 GB/s bandwidth is modest by modern standards, and the data suggests that the GPU cannot sustain high frame rates at 4K regardless of settings.

The GPU's FP32 performance of 13.17 TFLOPS is adequate for DirectX 12 titles like The Technomancer, which supports DirectX 12 Ultimate (12_2). The 2560 shading units and 80 TMUs provide decent rasterization capabilities, but the 32 ROPs limit pixel throughput, which is evident in the 4K results. The pixel rate of 82.30 GPixel/s and texture rate of 205.8 GTexel/s are respectable for the class, but they cannot overcome the memory constraints at high resolutions. Overall, the RTX 5050 is a capable 1080p GPU that struggles beyond 1440p in this title.

FAQ

Q: What is the best resolution to play The Technomancer with this combo?

A: Based on the measured FPS data, 1920x1080 is the only resolution where all settings presets achieve playable frame rates above 60 FPS. At 2560x1440, Medium and Low presets exceed 60 FPS, while at 3840x2160, no preset reaches 60 FPS, with the highest being Low at 54 FPS.

Q: How does the RTX 5050 compare to its nearest GPU rivals?

A: The RTX 5050's average benchmark score of 21035 places it near the AMD Radeon RX Vega M GL (21153, -0.6% delta), AMD Radeon HD 8970M (21237, -1% delta), and AMD Radeon RX 5600 XT (20713, +1.6% delta). This indicates the RTX 5050 performs within 2% of these mid-range GPUs in synthetic tests.

Q: Is the Ryzen 7 5800XT a bottleneck for the RTX 5050 in this game?

A: The CPU has an 81st percentile ranking against all CPUs, which is significantly higher than the GPU's 66th percentile. The data suggests the GPU is the limiting factor in The Technomancer, as the CPU's 8 cores and 16 threads provide ample processing power for gaming workloads.

Q: What frame rate can I expect at 1440p with Medium settings?

A: At 2560x1440 with Medium settings, the combo averages 75 FPS with a minimum of 64 FPS and a maximum of 87 FPS. This provides a smooth experience for most players, with the minimum still above the 60 FPS threshold.

Q: Does the RTX 5050's 8 GB VRAM cause issues at 4K?

A: The measured data shows that at 3840x2160, even Low settings only achieve 54 FPS average, and Ultra drops to 28 FPS. This pattern is consistent with 8 GB VRAM being insufficient for 4K textures in this title, causing significant performance degradation across all presets.

Q: How does this combo rank among all tested configurations?

A: The combo ranks 1721 out of 2825 tested combos in The Technomancer, placing it in the lower-middle tier. This rank reflects the GPU's mid-range performance, as the CPU is a high-end desktop processor that does not limit the overall result.

Resolution Scaling

The FPS drop from 1080p to 4K in The Technomancer is dramatic and reveals the GPU as the primary bottleneck. At 1080p High, the combo averages 98 FPS, while at 1440p High, it drops to 64 FPS, and at 4K High, it falls to 35 FPS. This represents a 64% reduction from 1080p to 4K at High settings. Similarly, at Medium settings, the average FPS goes from 115 at 1080p to 75 at 1440p to 41 at 4K, a 64% drop from 1080p to 4K. At Low settings, the decline is from 150 FPS at 1080p to 98 FPS at 1440p to 54 FPS at 4K, a 64% reduction as well.

This consistent 64% drop across all settings presets indicates that the GPU's rendering throughput scales almost linearly with pixel count, which is expected for a game that is not CPU-limited. The Ryzen 7 5800XT has a boost clock of 4.80 GHz and 32 MB of L3 cache, which provides more than enough performance to feed the GPU at any resolution. The fact that the FPS drops proportionally to the pixel count (1080p has 2.07 million pixels, 1440p has 3.69 million, and 4K has 8.29 million) confirms that the RTX 5050 is the limiting component.

The scaling pattern also suggests that neither the CPU nor the memory bandwidth becomes a secondary bottleneck at lower resolutions. At 1080p Low, the combo achieves 150 FPS, which is a high frame rate that would strain a weaker CPU. The fact that the Ryzen 7 5800XT can sustain this without dropping the minimum FPS below 98 at Medium settings indicates that the CPU has significant headroom. If the CPU were the bottleneck, we would expect to see a plateau in FPS at lower resolutions, but the data shows a continuous increase from 4K to 1080p.

The implication of this scaling is that players who want higher frame rates should prioritize reducing resolution over lowering settings. At 4K, even dropping from Ultra to Low only yields a 26 FPS improvement (from 28 to 54), while dropping from 4K to 1440p at the same settings yields a much larger improvement (e.g., from 35 to 64 FPS at High). This suggests that the GPU is more sensitive to resolution than to settings changes in this title.

CPU Role

The AMD Ryzen 7 5800XT is a desktop processor based on the Zen 3 architecture, codenamed Vermeer, manufactured on a 7 nm process at TSMC. It features 8 cores and 16 threads with a base clock of 3.80 GHz and a boost clock of 4.80 GHz. The CPU has a 32 MB shared L3 cache and supports DDR4 memory on a dual-channel bus with 51.2 GB/s bandwidth. In synthetic benchmarks, it achieves a single-thread score of 959 in 3DMark and 3359 in Cinebench R23, while multi-thread scores reach 7680 in 3DMark and 23794 in Cinebench R23.

In The Technomancer, the CPU's role is largely secondary to the GPU, as evidenced by the resolution scaling analysis. The game was released in 2016, and its engine was designed for the CPU architectures of that era. The Ryzen 7 5800XT's 8 cores and 16 threads provide substantial computational headroom, and the 4.80 GHz boost clock ensures strong single-threaded performance, which is crucial for game logic and physics. The 32 MB L3 cache helps reduce memory latency, which can benefit frame pacing in open-world environments.

The data shows that the CPU is not the limiting factor in this combo. At 1080p Low, the combo achieves 150 FPS average, and at Medium, it maintains a minimum of 98 FPS. These frame rates would be difficult to sustain if the CPU were struggling with game logic. The fact that the FPS scales predictably with resolution suggests that the GPU is saturated before the CPU. The Ryzen 7 5800XT's nearest CPU rivals, including the AMD Ryzen 7 7840H (delta 0%), AMD Ryzen 7 8845HS (delta -0.3%), and AMD Ryzen 5 9600X (delta +0.6%), all have similar average benchmark scores, indicating that the CPU is well-matched to its performance class.

For players using this combo, the CPU provides a stable foundation that will not cause frame drops or stuttering in The Technomancer. The 16 threads allow for background tasks without impacting game performance, and the Zen 3 architecture's strong IPC ensures that even heavily threaded scenes are handled efficiently. The CPU's 81st percentile ranking against all CPUs reinforces that it is a high-end processor that can support more powerful GPUs in future upgrades, but for this specific game, it is more than sufficient.

Measured FPS Breakdown

The measured FPS data for The Technomancer with the AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 5050 spans three resolutions and four settings presets. At 1920x1080, the results are as follows: Low settings produce an average of 150 FPS with no reported minimum or maximum; Medium settings average 115 FPS with a minimum of 98 and maximum of 132; High settings average 98 FPS with no reported bounds; Ultra settings average 77 FPS with no reported bounds. These numbers demonstrate that the combo excels at 1080p, with even the most demanding Ultra preset maintaining a comfortable margin above 60 FPS.

At 2560x1440, the performance decreases notably. Low settings average 98 FPS, Medium averages 75 FPS with a minimum of 64 and maximum of 87, High averages 64 FPS, and Ultra averages 50 FPS. The Medium preset's minimum of 64 FPS is particularly important, as it indicates that even in the most demanding scenes, the frame rate stays above the 60 FPS threshold. High at 1440p is borderline playable at 64 FPS average, but the lack of a reported minimum means users may experience dips below 60 FPS in heavy combat. Ultra at 1440p falls below 60 FPS, averaging 50 FPS, which is not ideal for fast-paced gameplay.

At 3840x2160, the combo struggles to maintain playable frame rates. Low settings average 54 FPS, Medium averages 41 FPS with a minimum of 35 and maximum of 48, High averages 35 FPS, and Ultra averages 28 FPS. None of these presets achieve 60 FPS, and even Low falls short of that target. The Medium preset's minimum of 35 FPS suggests that certain scenes can drop to near-unplayable levels. For 4K gaming, the data indicates that users would need to reduce resolution or accept lower visual quality to achieve a smooth experience.

The full breakdown reveals a clear pattern: the combo is best suited for 1080p and 1440p gaming, with 4K reserved for Low settings if the user prioritizes resolution over frame rate. The gap between Low and Ultra at each resolution is consistent — approximately 73 FPS at 1080p, 48 FPS at 1440p, and 26 FPS at 4K — which indicates that the settings presets have a diminishing impact at higher resolutions. This suggests that the GPU's memory bandwidth becomes the limiting factor as resolution increases, making settings adjustments less effective at 4K.