Steamworld Build
This combination provides smooth gameplay with an average of 90 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 26 | 39 | 52 | 67 |
| 1440p QHD | 49 | 73 | 97 | 127 |
| 1080p Full HD | 77 | 115 | 153 | 200 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with AMD Ryzen 5 5500 + NVIDIA GeForce RTX 5050, In-Depth Analysis
Steamworld Build is a city builder where the simulation’s complexity grows with your population, and the data for this AMD Ryzen 5 5500 + NVIDIA GeForce RTX 5050 combo shows a system that is firmly capable at 1080p and 1440p but struggles to maintain a playable experience at 4K Ultra. The measured results reveal a clear hierarchy of performance across resolutions and settings, with the GPU being the primary bottleneck at higher resolutions and the CPU providing a solid foundation that does not hold the graphics card back in most scenarios. This combination ranks in the 60th percentile of tested combos for this title, indicating a balanced but not exceptional pairing.
Resolution Scaling
The performance drop from 1080p to 4K is steep and decisive, revealing the RTX 5050’s limits under pixel-heavy loads. At High settings, the average frame rate falls from 115 FPS at 1920x1080 to 73 FPS at 2560x1440, a 37% reduction, and then plummets to 39 FPS at 3840x2160, which is a 66% drop from the 1080p figure. This scaling pattern shows that the GPU is the limiting component at 1440p and beyond, as the frame rate almost halves when moving from 1440p to 4K.
The data indicates that 4K is only viable on the Low preset, where the average frame rate reaches 67 FPS. Moving up to Medium at 4K yields 52 FPS with visible frame dips to 44 FPS, which may be borderline for a city builder where camera panning and zooming are frequent. The Ultra preset at 4K is effectively unplayable at 26 FPS, confirming that this resolution is not the intended target for this hardware combination in Steamworld Build. At 1440p, the experience is much healthier, with Low hitting 127 FPS and High delivering 73 FPS, which is smooth for the genre. The 1080p results are excellent, with even Ultra maintaining 77 FPS, showing that the system is well-suited for high-refresh-rate monitors at this resolution.
The scaling between Low and High presets also shows a consistent pattern. At 1080p, the jump from Low (200 FPS) to High (115 FPS) represents a 43% performance loss, which is substantial but leaves ample headroom. At 1440p, the same preset change drops from 127 FPS to 73 FPS, a 43% reduction, maintaining a similar proportional cost. At 4K, the drop from Low (67 FPS) to High (39 FPS) is a 42% loss, showing that the relative cost of higher settings remains constant, but the absolute frame rates become marginal. This indicates that the game’s settings have a consistent impact on the GPU workload, but the baseline performance at 4K is simply too low for anything above Medium.
GPU Role
The NVIDIA GeForce RTX 5050 is the defining component in this system’s gaming performance, and its 8 GB of GDDR6 memory on a 128-bit bus with 320.0 GB/s of bandwidth is a significant factor in the 4K results. The data shows a hard wall at 4K Ultra (26 FPS) and 4K High (39 FPS), suggesting that the memory capacity or bandwidth is insufficient for the texture and geometry loads at that resolution. The 8 GB frame buffer is likely exhausted, causing the frame rate to collapse regardless of the raw compute power available.
The GPU’s clock speeds, with a base of 2317 MHz and a boost of 2572 MHz, are relatively high, but they do not compensate for the memory constraints. The 2560 shading units and 80 TMUs provide enough throughput for 1080p and 1440p, where the measured results are strong. At 1440p High, the 73 FPS average shows the card is working efficiently, and at 1080p Ultra, the 77 FPS is a solid result for a card in this market segment. The GPU’s average benchmark score of 21035 places it in the 66th percentile of all GPUs, and its nearest rivals include the AMD Radeon RX 5600 XT, which scores 1.6% higher, and the AMD Radeon RX Vega M GL, which scores 0.6% lower. This places the RTX 5050 in a competitive position, but the game-specific data shows that it is not a 4K-capable card for this title.
The measured frames per second at 4K Medium (52 FPS) and 4K Low (67 FPS) suggest that the GPU can handle the workload if the settings are reduced to lower the memory footprint. The frame time data at Medium shows a minimum of 44 FPS, which indicates occasional stutters, likely when the memory bandwidth is saturated during complex scene changes. The card’s 130 W TDP and dual-slot design suggest it is a compact, efficient part, but the 8 GB memory configuration is the clear limiting factor for resolution scaling in this game. The direct comparison between 1080p and 1440p shows a 37% performance drop at High, which is typical for a card of this class, but the 47% drop from 1440p to 4K highlights the disproportionate penalty at higher resolutions.
CPU Role
The AMD Ryzen 5 5500 provides a solid foundation for this GPU, with 6 cores and 12 threads based on the Zen 3 architecture. Its base clock of 3.60 GHz and boost clock of 4.20 GHz are adequate for a city builder, which often relies on single-threaded performance for simulation logic. The CPU’s average benchmark score of 19593 places it in the 73rd percentile of all CPUs, and its nearest rival, the Intel Core i5-12500, scores 0.4% higher, while the Intel Core i7-10700F scores 0.5% lower. This indicates that the CPU is a competent mid-range part that should not bottleneck the GPU in most gaming scenarios.
The benchmark results show strong multi-threaded performance, with a Cinebench R23 multi-core score of 16429 and a Geekbench multi-core score of 7976. The single-thread scores are also respectable, with a Cinebench R23 single-core score of 2319 and a Geekbench single-core score of 1730. For Steamworld Build, the data suggests that the CPU is not the limiting factor at 1080p, where the frame rates are high and likely GPU-bound. At 1080p Low, the 200 FPS average shows that the CPU can feed the GPU with enough draw calls to reach very high frame rates, which is a good sign for the simulation’s efficiency.
The CPU’s 16 MB of L3 cache and dual-channel DDR4 memory support with 51.2 GB/s of bandwidth are sufficient for the game’s needs. The lack of integrated graphics is irrelevant since a discrete GPU is present. The fact that the CPU scores are consistently higher than its nearest rivals in some tests but lower in others suggests a balanced architecture. For this game, the data indicates that the Ryzen 5 5500 does not hold back the RTX 5050, as the frame rate scaling between 1080p and 1440p is consistent with a GPU-bound scenario. The 12 threads are sufficient for the simulation, and the boost clock of 4.20 GHz provides the single-thread speed needed for smooth camera movement and building placement.
Settings Recommendations
Based on the measured rows, the optimal experience for this combo depends heavily on the target resolution. For 1080p users, the Ultra preset at 77 FPS average is the best choice, as it provides the highest visual quality without sacrificing smoothness. The High preset at 115 FPS is also excellent for those with 144Hz displays, offering a 49% performance increase over Ultra with a moderate visual downgrade. The Medium preset at 153 FPS is overkill for most monitors and suggests that the GPU has headroom to spare, but the visual benefits of Ultra are worth the frame rate cost.
At 1440p, the High preset at 73 FPS is the most balanced option, providing a smooth experience with good detail. The Ultra preset at 49 FPS is playable but may feel slightly less fluid during busy scenes, and the Medium preset at 97 FPS is a better choice for those who prioritize frame rate over visual fidelity. The Low preset at 127 FPS is only recommended for competitive play or if the user has a high-refresh-rate monitor, as the visual downgrade is significant. For 4K, the Low preset at 67 FPS is the only fully playable option, while the Medium preset at 52 FPS is borderline and may cause noticeable stutters as the frame rate dips to 44 FPS. The High and Ultra presets at 4K should be avoided entirely, as the 39 FPS and 26 FPS averages are not suitable for a city builder where constant interaction with the map is required.
The data suggests that the best overall experience for this system is 1440p High, as it provides a 73 FPS average with good visual quality and no major frame dips. The 4K Low preset is a viable alternative for those with 4K displays, but the visual compromise is substantial. The Medium preset at 1440p offers a 33% improvement over High in frame rate, but the visual difference between Medium and High is often less noticeable in city builders, making High the more sensible choice for most users.
How This Combo Ranks
This combination of the AMD Ryzen 5 5500 and NVIDIA GeForce RTX 5050 ranks 1755 out of 2924 tested combos in Steamworld Build, placing it in the 60th percentile. This ranking indicates that the system performs better than a majority of configurations but is not at the top tier. The percentile ranking is consistent with the hardware’s individual standings, as the CPU is in the 73rd percentile and the GPU is in the 66th percentile. The combo ranking being lower than the CPU’s percentile suggests that the GPU is the limiting factor in this title, which aligns with the resolution scaling data.
The rank of 1755 out of 2924 implies that there are 1169 combos that perform better, which likely include higher-end GPUs with more VRAM or faster processors. The system is not a high-end setup, but it is positioned above the median, indicating that it is a capable mid-range configuration. The fact that the data is measured, rather than estimated, adds credibility to the rank, and the results show that the system can handle 1080p and 1440p gaming well. The ranking also suggests that users should not expect 4K performance from this combo, as the rank would likely be higher if the GPU could sustain higher frame rates at that resolution. The CPU’s performance is not a bottleneck, as its percentile ranking is higher than the combo’s, meaning that upgrading the GPU would yield a larger improvement in this game than upgrading the CPU.
FAQ
Q: Can this system run Steamworld Build at 4K?
A: Yes, but only at the Low preset, which achieves an average of 67 FPS. The Medium preset at 4K runs at 52 FPS with dips to 44 FPS, while High and Ultra presets drop to 39 FPS and 26 FPS, respectively, making them unsuitable for normal play.
Q: What is the best resolution for this combo in this game?
A: The data shows that 1440p High provides the best balance, with a 73 FPS average. At 1080p, Ultra runs at 77 FPS, which is also excellent, but 1440p offers a sharper image without a significant frame rate penalty.
Q: Is the CPU or GPU the bottleneck in this game?
A: The GPU is the primary bottleneck at higher resolutions. The frame rate drops significantly from 1440p to 4K (from 73 FPS to 39 FPS at High), while the CPU’s performance is sufficient to reach 200 FPS at 1080p Low, indicating it is not limiting the system.
Q: How does this combo rank against other tested systems?
A: This combo ranks 1755 out of 2924 total combos, placing it in the 60th percentile. This means it performs better than 60% of all tested configurations, but there are still 1169 combos with higher performance.
Q: What is the impact of the 8 GB VRAM on performance?
A: The 8 GB VRAM is likely the cause of the severe performance drop at 4K. The frame rate falls from 73 FPS at 1440p High to 39 FPS at 4K High, indicating that the memory capacity or bandwidth is insufficient for the higher resolution’s demands.
Q: Should I use the Medium or High preset for the best experience?
A: At 1440p, the High preset at 73 FPS is recommended over Medium at 97 FPS, as the visual upgrade is worth the 33% frame rate reduction. At 1080p, the Ultra preset at 77 FPS is the best choice, as the frame rate remains high enough for smooth gameplay.
Hardware Specifications
AMD Ryzen 5 5500
NVIDIA GeForce RTX 5050
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5500 + NVIDIA GeForce RTX 5050 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 67.0 |
| 3840x2160 | Medium | 52.0 |
| 3840x2160 | High | 39.0 |
| 3840x2160 | Ultra | 26.0 |
| 2560x1440 | Low | 127.0 |
| 2560x1440 | Medium | 97.0 |
| 2560x1440 | High | 73.0 |
| 2560x1440 | Ultra | 49.0 |
| 1920x1080 | Low | 200.0 |
| 1920x1080 | Medium | 153.0 |
| 1920x1080 | High | 115.0 |
| 1920x1080 | Ultra | 77.0 |
Steamworld Build with Ryzen 5 5500 + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 5050 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with Ryzen 5 5500 + RTX 5050
Explore FPS benchmarks for other games using this same hardware combination.