Inside

Inside is a 2016 puzzle platformer that, by modern standards, is not a demanding title, but the measured data for the AMD Ryzen 5 5600GT and NVIDIA GeForce RTX 5050 combination reveals a system that is thoroughly overqualified for the task. The benchmark results show a pairing that delivers exceptional frame rates across all tested resolutions and settings, with the GPU and CPU both contributing to a smooth experience that far exceeds the requirements of the game.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5600GT is a 6-core, 12-thread processor based on the Zen 3 architecture, featuring a base clock of 3.60 GHz and a boost clock of 4.60 GHz. In the context of a puzzle platformer like Inside, which typically relies on single-thread performance for game logic and physics, this processor's specifications are more than sufficient. The data shows that even at 1080p with Low settings, the system achieves an average of 296 FPS, indicating that the CPU is not a bottleneck in any scenario.

The 5600GT's benchmark scores reinforce its capability. In Cinebench R23, it scores 17,272 points in multi-core and 2,438 points in single-core tests. This single-core score is particularly relevant for Inside, as the game's deterministic puzzle mechanics and side-scrolling physics calculations often run on a single primary thread. The processor's 3DMark single-thread score of 913 and 2-thread score of 1,794 further support that its per-core performance is strong enough to handle the game's logic without any frame pacing issues.

Comparing the 5600GT to its nearest rivals, the data shows it is virtually tied with the Intel Core i5-12490F, which has an average benchmark score of 20,802, a delta of -0.3% relative to the 5600GT's average of 20,733. This means that in terms of raw processing power, the 5600GT is on par with that Intel chip, and both are more than adequate for a game like Inside. The 5600GT also has 16 MB of L3 cache, which helps with quick data access for the game's assets, though the game's small footprint makes this less critical than in open-world titles.

Given these specifications, the CPU's role in Inside is to ensure that the frame rate does not dip when the game loads new areas or when many objects are on screen simultaneously. The measured FPS data shows no such dips, even at 4K Ultra where the average is 64 FPS. The processor's 65W TDP and dual-channel DDR4 memory support (with a bandwidth of 51.2 GB/s) are sufficient to feed the GPU with data, ensuring that the RTX 5050 is never starved of information. In short, the Ryzen 5 5600GT is a high-performance CPU that provides a massive headroom for this game, and its capabilities are not fully stressed by Inside's demands.

Settings Recommendations — which preset gives the best experience per the measured rows

When analyzing the measured FPS for various settings presets, the data provides a clear picture of what the Ryzen 5 5600GT and RTX 5050 combination can deliver. The goal is to find a preset that maintains a high frame rate while maximizing visual fidelity. At 1080p, all settings are playable, but the differences are notable. The Low preset yields an average of 296 FPS, which is far beyond any display's refresh rate. The Medium preset averages 237 FPS with a minimum of 201 FPS, while High averages 148 FPS. The Ultra preset averages 141 FPS.

The data suggests that the Medium preset at 1080p is the sweet spot for this combo. It offers a significant jump in visual quality over Low while still providing an average of 237 FPS, which is well above the 144Hz refresh rate common on modern monitors. The minimum FPS of 201 ensures there are no noticeable stutters. Moving to High drops the average to 148 FPS, which is still excellent but offers diminishing returns for the visual upgrade over Medium. Ultra provides a similar average to High (141 FPS) but may include additional effects that are not worth the small frame rate cost.

At 1440p, the Medium preset again stands out. It delivers an average of 170 FPS with a minimum of 145 FPS, making it a perfect match for 144Hz displays. The High preset at 1440p averages 106 FPS, which is still smooth but requires a 120Hz or lower refresh rate to see the full benefit without tearing. The Low preset at 213 FPS is overkill, and the Ultra preset at 101 FPS is just above the 100 FPS mark, making it a viable option for those who prioritize visuals over a higher refresh rate.

For 4K, the recommendation changes. The Medium preset at 3840x2160 averages 107 FPS with a minimum of 91 FPS, which is ideal for a 4K 120Hz display. The High preset drops to 67 FPS, which is still playable but may feel less responsive on a high-refresh-rate screen. The Ultra preset at 64 FPS is borderline for smooth gameplay. Therefore, the data indicates that Medium is the best overall setting for this combo across all resolutions, as it consistently provides a frame rate that is at least 91 FPS at 4K and above 200 FPS at 1080p, striking the best balance between visual quality and performance.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data shows a clear scaling pattern from 1080p to 4K, which reveals the load distribution between the CPU and GPU. At 1080p with Low settings, the system achieves 296 FPS. Moving to 1440p Low, the frame rate drops to 213 FPS, a 28% decrease. At 4K Low, it further drops to 134 FPS, a 55% decrease from the 1080p figure. This significant drop at 4K indicates that the GPU is becoming the primary limiting factor, as the resolution increases the pixel count that the RTX 5050 must render.

The pattern is consistent across other settings. For High settings, the frame rate drops from 148 FPS at 1080p to 106 FPS at 1440p (a 28% decrease) and then to 67 FPS at 4K (a 55% decrease from 1080p). The Medium settings follow a similar trend: 237 FPS at 1080p, 170 FPS at 1440p (a 28% decrease), and 107 FPS at 4K (a 55% decrease from 1080p). This consistent scaling suggests that the CPU is not a bottleneck at any resolution, as the frame rate drops are directly proportional to the increase in pixel count, which is a GPU-bound workload.

The data indicates that the RTX 5050's 8 GB of VRAM and 128-bit memory bus are sufficient for Inside at all resolutions, as the frame rate drops are not accompanied by any memory-related stutters. The 320.0 GB/s memory bandwidth handles the game's textures easily, even at 4K. The scaling from 1080p to 4K shows a halving of frame rates for the same settings, which is classic behavior for a GPU-bound scenario. If the CPU were the bottleneck, the frame rate would be more consistent across resolutions, but the data shows a clear decline that aligns with the GPU's rendering workload. Therefore, the limiting component at higher resolutions is unequivocally the GPU.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the AMD Ryzen 5 5600GT and the NVIDIA GeForce RTX 5050 ranks 2247 out of 3716 tested combos for Inside. This ranking places it in the 60th percentile of all tested systems, indicating that it performs better than the majority of combinations but is not at the very top end. This is expected, as the RTX 5050 is an entry-level GPU in the GeForce 50-series, while many higher-ranked combos likely feature more powerful GPUs like the RTX 5070 or RTX 5080.

However, this ranking does not tell the full story of the user experience. Despite being in the lower half of the top 40% of combos, the actual performance in Inside is exceptional. The rank of 2247 out of 3716 means that there are roughly 1,469 combos that achieve higher frame rates, but the difference is often negligible. For example, at 1080p Low, this combo achieves 296 FPS, which is likely close to the maximum that the game's engine allows. Higher-ranked combos might push slightly higher, but the improvement is imperceptible to the human eye.

The combo's rank is influenced by the CPU's and GPU's individual percentiles. The Ryzen 5 5600GT sits at the 74th percentile of all CPUs, while the RTX 5050 sits at the 66th percentile of all GPUs. The combination of a mid-range CPU and an entry-level GPU results in a system that is well-balanced for most games, but for a lightweight title like Inside, the GPU's limitations are not fully exposed. The rank of 2247 suggests that this combo is not the fastest available, but the measured FPS data proves that it is more than capable of delivering a flawless experience in this specific game, with no settings or resolution requiring any compromises.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 5050 is built on the Blackwell 2.0 architecture and features 2,560 shading units, 80 texture mapping units, and 32 raster output units. It has a base clock of 2,317 MHz and a boost clock of 2,572 MHz. The GPU is equipped with 8 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 320.0 GB/s. For a game like Inside, which uses a monochromatic art style and relatively simple 2.5D graphics, these specifications are more than sufficient.

The GPU's role in Inside is to handle the rendering of the game's atmospheric lighting, shadows, and particle effects. The measured FPS data shows that the RTX 5050 is capable of handling these effects at high frame rates. At 1080p Ultra, the GPU averages 141 FPS, indicating that it can process the game's most demanding visual settings without breaking a sweat. The 8 GB of VRAM is ample for the game's texture sizes, and the 320.0 GB/s bandwidth ensures that there are no bottlenecks in loading textures as the player moves through the game's linear levels.

The GPU's benchmark scores corroborate its performance in Inside. In 3DMark Steel Nomad (DX12), it scores 2,502 points, and in PassMark's G3D test, it scores 17,326 points. These scores place it in the 66th percentile of all GPUs, but its nearest rivals are interesting: the AMD Radeon RX 5600 XT has a delta of +1.6% (meaning it scores 1.6% higher), while the AMD Radeon RX Vega M GL has a delta of -0.6%. This shows that the RTX 5050 is competitive with slightly older mid-range GPUs, which are all overkill for Inside.

The GPU's clock speeds are particularly relevant for a game that may not fully utilize multi-threaded rendering. The high boost clock of 2,572 MHz ensures that single-threaded draw calls are processed quickly. The data shows that at 4K Ultra, the GPU maintains an average of 64 FPS, which is the lowest measured result but still perfectly playable. This demonstrates that the RTX 5050's 13.17 TFLOPS of FP32 performance is capable of pushing the pixel count at 4K, even in a game that is not heavily optimized for high resolutions. The GPU is clearly the star of this combo, providing enough power to run Inside at maximum settings on any resolution.

FAQ

Q: What is the maximum average FPS achievable with this combo in Inside?

A: The highest measured average FPS is 296, which is achieved at 1920x1080 resolution with the Low settings preset.

Q: Can this system handle 4K gaming in Inside?

A: Yes, the data shows that at 3840x2160 resolution, the system achieves an average of 107 FPS on Medium settings and 67 FPS on High settings, making 4K gaming viable.

Q: Is the CPU or GPU the bottleneck at 1440p?

A: At 1440p, the frame rate drops by 28% compared to 1080p for the same settings, indicating that the GPU is the limiting component as the resolution increases.

Q: How does the RTX 5050 compare to the AMD Radeon RX 5600 XT in terms of benchmark scores?

A: The RTX 5050 has an average benchmark score of 21,035, which is 1.6% lower than the AMD Radeon RX 5600 XT's score of 20,713.

Q: What is the minimum FPS recorded for the Medium settings preset?

A: The minimum FPS for Medium settings is 201 at 1080p, 145 at 1440p, and 91 at 4K.

Q: Does the combo rank in the top half of all tested systems?

A: Yes, the combo ranks 2247 out of 3716 tested combos, placing it in the upper 40% of all systems tested for Inside.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The following table details the exact measured average frame rates for the AMD Ryzen 5 5600GT and NVIDIA GeForce RTX 5050 combination in Inside, across all tested resolutions and settings presets.

| Resolution | Settings | Average FPS | Minimum FPS | Maximum FPS |

|---|---|---|---|---|

| 1920x1080 | Low | 296 | N/A | N/A |

| 1920x1080 | Medium | 237 | 201 | 272 |

| 1920x1080 | High | 148 | N/A | N/A |

| 1920x1080 | Ultra | 141 | N/A | N/A |

| 2560x1440 | Low | 213 | N/A | N/A |

| 2560x1440 | Medium | 170 | 145 | 196 |

| 2560x1440 | High | 106 | N/A | N/A |

| 2560x1440 | Ultra | 101 | N/A | N/A |

| 3840x2160 | Low | 134 | N/A | N/A |

| 3840x2160 | Medium | 107 | 91 | 123 |

| 3840x2160 | High | 67 | N/A | N/A |

| 3840x2160 | Ultra | 64 | N/A | N/A |

The data reveals a consistent pattern. At 1080p, the system delivers over 140 FPS in all presets, with the Low preset nearly hitting 300 FPS. The Medium preset is the most balanced, offering a 237 FPS average with a minimum of 201 FPS. At 1440p, the Medium preset still provides a high refresh rate experience at 170 FPS, while the High preset drops to 106 FPS. At 4K, the Medium preset is the only one that maintains an average above 100 FPS, at 107 FPS. The Ultra preset at 4K is the most demanding, but still playable at 64 FPS. These numbers confirm that the combo is capable of running Inside at the highest settings on 1080p and 1440p displays, and at Medium settings on 4K displays, without any noticeable performance issues.