Fivem

The Intel Core i7-14700F paired with the Intel Arc B580 presents a highly CPU-favorable profile in Fivem, evidenced by the FPS scaling across resolutions. At 1080p Low, the combination delivers 153.9 FPS, which drops to 98 FPS at 1440p Low and further to 55.4 FPS at 4K Low. This scaling pattern, where performance nearly halves from 1080p to 4K, indicates that the Arc B580 becomes the limiting factor as resolution increases, while the 20-core processor has ample headroom to feed frames at lower resolutions.

Resolution Scaling

The data reveals a classic transition from CPU-bound to GPU-bound behavior as resolution climbs. At 1080p, the i7-14700F's 20 cores and 28 threads keep the Arc B580 well-fed, allowing the GPU to express its full potential. The jump from 1080p Low (153.9 FPS) to 1440p Low (98 FPS) represents a 36% reduction in frame rate, which is substantial but expected for a GPU with a 192-bit memory bus. The further drop to 4K Low (55.4 FPS) shows another 43% decline, confirming that the B580's 13.67 TFLOPS of compute and 456.0 GB/s of bandwidth are increasingly taxed at higher pixel counts.

The gap between settings widens at higher resolutions. At 1080p, the spread from Ultra (76.4 FPS) to Low (153.9 FPS) is 77.5 FPS, but at 4K, the same spread shrinks to 27.9 FPS (from 27.5 to 55.4). This compression indicates that at 4K, even Low settings cannot overcome the GPU's pixel throughput limits, making the Arc B580 the definitive bottleneck. Conversely, at 1080p, the CPU's strong single-thread performance, evidenced by a Cinebench R23 single-core score of 5003, allows the GPU to run at near-peak efficiency.

The 4K Ultra result of 27.5 FPS is particularly telling. It suggests that Fivem's Ultra preset imposes shader and texture workloads that the B580's 2560 shading units cannot handle at 4K resolution. The 12 GB VRAM buffer is not the constraint here; rather, it is the raw fill rate and compute throughput. For players targeting 4K, the data shows that even dropping to Medium settings (42.9 FPS) only yields a marginal improvement, falling short of the 60 FPS threshold.

FAQ

Q: What is the best resolution for this combo in Fivem?

A: The data shows 1440p High delivers 61.2 FPS, which is the only resolution above 1080p that achieves playable performance on High settings. At 4K, all presets fall below 55.4 FPS, making 1440p the practical ceiling for this pairing.

Q: How does the Arc B580 compare to its nearest rivals in synthetic benchmarks?

A: The B580 scores 23021 on average, placing it 0.1% ahead of the AMD Radeon 760M and 0.3% ahead of the NVIDIA P106-100. It sits 0.7% behind the NVIDIA GeForce RTX 4060 and 1.3% ahead of the RTX 4060 Mobile, indicating a tightly grouped mid-range field.

Q: Is the i7-14700F a bottleneck at 1080p?

A: The 1080p Low result of 153.9 FPS suggests minimal CPU limitation. The processor's 94th percentile ranking among all CPUs and its Cinebench R23 multi-core score of 35443 provide ample headroom for Fivem's multiplayer workloads.

Q: What FPS can I expect at 1440p Medium?

A: The measured data shows 80.6 FPS at 1440p Medium. This represents a 31% improvement over High settings (61.2 FPS) while maintaining visual quality above Low.

Q: Does the 12 GB VRAM matter for this game?

A: The 12 GB GDDR6 buffer with 456.0 GB/s bandwidth is sufficient for all tested presets, as frame rate declines are driven by compute limits rather than memory capacity. The 4K Ultra result of 27.5 FPS occurs despite ample VRAM headroom.

Q: How does this combo rank among all tested configurations?

A: It ranks 1399th out of 1792 combos, placing it in the lower 22% of tested pairings, which is below average given the CPU's high percentile ranking.

GPU Role

The Intel Arc B580's specifications directly explain its behavior in Fivem. With a base and boost clock of 2670 MHz, the GPU operates at a fixed frequency, providing consistent compute throughput. The 2560 shading units, 160 TMUs, and 80 ROPs deliver a pixel rate of 213.6 GPixel/s and a texture rate of 427.2 GTexel/s, which are moderate figures for a 190 W card. The 19,600 million transistors on a 5 nm TSMC process yield 13.67 TFLOPS of FP32 performance.

The memory subsystem is a key differentiator. The 192-bit bus width paired with 2375 MHz memory (19 Gbps effective) produces 456.0 GB/s of bandwidth. This is sufficient for 1080p and 1440p gaming but becomes strained at 4K, particularly with High and Ultra presets that increase texture detail. The 12 GB capacity is generous for Fivem, which is a multiplayer modification of Grand Theft Auto V, but the bandwidth limitation manifests in the 4K scaling collapse.

Synthetic benchmarks position the B580 at the 66th percentile of all GPUs, with a PassMark G3D score of 15748. Its nearest rival, the RTX 4060, scores 23181 on average, a 0.7% advantage. This tight margin explains why the B580 performs competently at 1080p but cannot sustain high frame rates at 4K, where architectural differences in memory bandwidth and rasterization throughput become more pronounced.

Measured FPS Breakdown

At 1920x1080, the combo delivers a wide range of performance depending on settings. Low settings produce 153.9 FPS, Medium yields 117.5 FPS, High achieves 94.2 FPS, and Ultra drops to 76.4 FPS. These numbers indicate that the CPU-GPU balance is optimal at 1080p, with the i7-14700F's strong single-core performance (Cinebench R23 single-core score of 5003) preventing any CPU-induced stalls.

Moving to 2560x1440, the frame rates scale down predictably. Low settings maintain 98 FPS, which is still highly playable, while Medium delivers 80.6 FPS. High settings drop to 61.2 FPS, just above the 60 FPS target, and Ultra falls to 49.5 FPS, introducing noticeable stutter in fast-paced multiplayer scenarios. The transition from 1080p to 1440p costs approximately 36% performance across all settings, reflecting the increased pixel workload.

At 3840x2160, the B580's limitations become stark. Low settings yield 55.4 FPS, Medium drops to 42.9 FPS, High manages 38.1 FPS, and Ultra plummets to 27.5 FPS. None of these results achieve the 60 FPS threshold, and even the Low preset struggles. The data suggests that 4K gaming is not viable with this GPU in Fivem, regardless of settings optimization.

How This Combo Ranks

The Intel Core i7-14700F + Intel Arc B580 combination ranks 1399th out of 1792 tested combos in Fivem, placing it in the bottom 22% of configurations. This ranking is surprising given the CPU's prowess; the i7-14700F sits in the 94th percentile of all CPUs, with an average benchmark score of 54097. The GPU, however, only reaches the 66th percentile, with an average score of 23021, and this disparity drags the overall combo ranking down.

The CPU's nearest rivals in synthetic benchmarks are the AMD Ryzen 9 9900X, which is 0.6% faster, and the Ryzen 9 9900X3D, which is 1.1% faster. The Intel Xeon Phi 7290 trails by 1.2%, and the AMD EPYC 7313P is 1.7% behind. This clustering shows that the i7-14700F is competitive with top-tier desktop processors, yet the B580's performance ceiling limits the overall gaming experience.

The rank of 1399 suggests that many other GPU-CPU combos achieve higher frame rates in Fivem, likely due to GPUs with higher bandwidth or more shading units. The B580's 13.67 TFLOPS and 456.0 GB/s bandwidth are not enough to overcome the CPU's potential, resulting in a pairing that is CPU-rich but GPU-limited in this specific title.

CPU Role

The Intel Core i7-14700F is a 20-core, 28-thread processor based on the Raptor Lake architecture, fabricated on a 10 nm process. Its base clock of 2.10 GHz and boost clock of 5.40 GHz provide strong single-thread performance, as evidenced by the Cinebench R23 single-core score of 5003. The 33 MB of shared L3 cache and 2 MB per-core L2 cache ensure that Fivem's frequently accessed data remains close to the execution cores.

In multi-threaded workloads, the CPU excels, with a Cinebench R23 multi-core score of 35443 and a Geekbench multi-core score of 16571. The PassMark multithread score of 41765 further confirms its capability. For Fivem, which is a multiplayer mod that can stress multiple cores for physics, AI, and network processing, the 28 threads provide substantial headroom. The processor's 94th percentile ranking among all CPUs indicates that it is not the limiting factor in this combo.

The CPU's memory support for DDR4 and DDR5, with a dual-channel bus, allows flexible system configuration. The 65 W TDP is modest for a 20-core part, suggesting efficient power delivery. In synthetic benchmarks, the i7-14700F scores 3572 in Cinebench R15 multi-core and 504 in single-core, with a PassMark single-thread score of 4261. These figures place it firmly in the high-performance desktop segment.

Settings Recommendations

For players using this combo, the measured data provides clear guidance. At 1080p, Medium settings (117.5 FPS) offer the best balance of visual fidelity and frame rate, providing a 25% improvement over High (94.2 FPS) while maintaining smooth gameplay. Low settings (153.9 FPS) are recommended for competitive play where maximum frame rates are prioritized, as the 36 FPS advantage over Medium can reduce input latency.

At 1440p, High settings (61.2 FPS) just meet the 60 FPS target, but Medium (80.6 FPS) provides a safer margin for dips in busy multiplayer scenes. The 19.4 FPS difference between Medium and High makes Medium the recommended choice for consistent performance. Low settings (98 FPS) remain viable for players who prefer maximum responsiveness over visual quality.

For 4K, the data shows that no preset achieves 60 FPS. Low settings (55.4 FPS) are the only playable option, and even then, users should expect occasional frame drops. Medium (42.9 FPS) and High (38.1 FPS) are too demanding for smooth gameplay, while Ultra (27.5 FPS) is essentially unplayable. Players with 4K displays should consider lowering resolution to 1440p for a better experience, as the 1440p Medium result of 80.6 FPS is significantly superior to the 4K Low result of 55.4 FPS.

The overall recommendation is to run Fivem at 1080p Medium or 1440p Medium, depending on monitor resolution and refresh rate. These settings leverage the CPU's strength while staying within the GPU's capabilities, delivering the best combination of visual quality and performance that this hardware pairing can achieve.