Fivem

The Intel Core i7-12700K paired with the NVIDIA GeForce RTX 5070 Ti delivers a measured performance profile in Fivem that places this combination at rank 133 out of 1,792 tested combos. The CPU carries a launch MSRP of $409, and the GPU has a launch MSRP of 749 USD. Both components sit in the upper percentiles of their respective categories — the CPU at the 89th percentile and the GPU at the 87th — and the measured frame rates across resolutions and settings reflect a system that is capable of high refresh rates at 1080p and solid 4K playability.

Resolution Scaling

The measured FPS data shows a clear and consistent drop as resolution increases from 1920x1080 to 3840x2160. At High settings, the average frame rate falls from 198.1 FPS at 1080p to 133.1 FPS at 1440p, and then to 72.1 FPS at 4K. The Low preset follows a similar trajectory: 317.5 FPS at 1080p, 208.5 FPS at 1440p, and 116.6 FPS at 4K. Medium settings produce 250.8 FPS at 1080p, 165 FPS at 1440p, and 89.8 FPS at 4K. Ultra settings yield 157.6 FPS at 1080p, 104.6 FPS at 1440p, and 58.5 FPS at 4K.

The pattern across all four presets indicates that the GPU becomes the dominant limiting factor as pixel count rises. At 1080p, the frame rates are exceptionally high — even Ultra exceeds 150 FPS — which suggests that the CPU is capable of feeding the GPU with enough draw calls to saturate the rendering pipeline. At 4K, the frame rates drop to roughly one-third to one-half of their 1080p counterparts, a scaling behavior typical of a GPU-bound workload. The fact that the drop from 1440p to 4K is proportionally similar to the drop from 1080p to 1440p (for example, High goes from 198.1 to 133.1 to 72.1) reinforces that the RTX 5070 Ti's compute and memory bandwidth are the primary constraints at higher resolutions. The 16 GB GDDR7 memory and 896.0 GB/s bandwidth are sufficient for Fivem's asset streaming, but the raw pixel throughput at 4K Ultra still limits the average to 58.5 FPS.

How This Combo Ranks

In the database of tested combinations for Fivem, this CPU-GPU pairing ranks 133rd out of 1,792. That places it in the top tier of all tested systems, though not at the very top. The rank is derived from the measured FPS across all settings and resolutions, so it reflects overall capability rather than a single best-case scenario. The CPU's average benchmark score is 35,684, which is within 0.3% of the AMD Ryzen 7 PRO 5845 (35,802) and 0.6% above the Intel Core i7-13700T (35,468). The GPU's average benchmark score is 52,086, essentially tied with the NVIDIA GeForce RTX 4080 (52,085) and 0.8% below the AMD Radeon RX 7700S (52,505). These individual scores align with the combo's high rank, indicating that neither component is a weak link in this pairing.

The 133rd position out of 1,792 means that roughly 93% of tested combos are slower, though the exact percentage is not provided. The data shows that this system is well above the median for Fivem, which is a multiplayer title that can be sensitive to both CPU and GPU performance depending on server population and scene complexity. The high rank suggests that the i7-12700K's 12 cores and 20 threads, combined with the RTX 5070 Ti's Blackwell architecture, deliver a balanced experience that handles both the simulation overhead and the rendering load effectively.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is built on the Blackwell 2.0 architecture with a GB203 chip on a 5 nm process. It features 8,960 shading units, 280 texture mapping units, and 96 ROPs, along with 70 RT cores and 280 tensor cores. The base clock is 2,295 MHz with a boost clock of 2,452 MHz, and the memory runs at 1,750 MHz (28 Gbps effective) across a 256-bit bus, yielding a bandwidth of 896.0 GB/s. The 16 GB GDDR7 frame buffer is generous for Fivem, which can load large textures and high draw distances in multiplayer environments.

In Fivem, the GPU's role is most evident at 4K. The measured 4K Ultra average of 58.5 FPS is the lowest of any setting, but it remains playable. The 4K High average of 72.1 FPS and 4K Medium of 89.8 FPS show that the GPU can handle the resolution when settings are moderated. The boost clock of 2,452 MHz contributes to the high frame rates at 1080p, where the GPU is not the bottleneck — the 1080p Low result of 317.5 FPS demonstrates that the card can output far more frames than the CPU can feed in some scenarios. The GPU's percentile of 87 versus all GPUs, and its average benchmark score of 52,086, place it in the upper echelon of available graphics cards. Its nearest rival, the RTX 4080, has an identical average score, indicating that the 5070 Ti offers comparable raw performance in synthetic tests.

Measured FPS Breakdown

The following table lists the exact average FPS values for each resolution and settings preset, as measured in Fivem.

| Resolution | Low | Medium | High | Ultra |

|------------|-----|--------|------|-------|

| 1920x1080 | 317.5 | 250.8 | 198.1 | 157.6 |

| 2560x1440 | 208.5 | 165.0 | 133.1 | 104.6 |

| 3840x2160 | 116.6 | 89.8 | 72.1 | 58.5 |

At 1080p, even the Ultra preset maintains an average of 157.6 FPS, which is well above the refresh rate of most high-end monitors. The Low preset reaches 317.5 FPS, a figure that suggests the CPU is the limiting factor at this resolution, as the GPU is capable of far higher output. At 1440p, the frame rates remain strong: Low at 208.5 FPS, Medium at 165.0 FPS, High at 133.1 FPS, and Ultra at 104.6 FPS. These numbers indicate that 1440p is a sweet spot for this combo, offering high refresh rates even on Ultra. At 4K, the frame rates drop to 116.6 FPS on Low, 89.8 FPS on Medium, 72.1 FPS on High, and 58.5 FPS on Ultra. The 4K Ultra result is the only one below 60 FPS, but it is still within a playable range for a multiplayer title.

The data shows a consistent scaling pattern: each step from Low to Ultra reduces the average FPS by a similar margin across all resolutions. For example, at 1080p, the difference between Low and Ultra is 159.9 FPS (317.5 minus 157.6), but that number is not directly provided; the individual values are. The trend is clear: the GPU's workload increases with both resolution and settings, and the measured averages reflect that.

CPU Role

The Intel Core i7-12700K is a 12-core, 20-thread processor based on the Alder Lake architecture, manufactured on a 10 nm process. It has a base clock of 3.60 GHz and a boost clock of 5.00 GHz, with 25 MB of shared L3 cache. The CPU supports DDR4 and DDR5 memory in a dual-channel configuration, and it includes integrated UHD Graphics 770, though the discrete GPU handles rendering in this test. The CPU's benchmark scores are strong: Cinebench R23 multi-core reaches 29,241, single-core 4,128, and Geekbench multi-core 13,892 with a single-core score of 2,561. Its average benchmark score is 35,684, placing it at the 89th percentile of all CPUs.

In Fivem, the CPU's role is most apparent at 1080p, where the frame rates are extremely high. The 1080p Low average of 317.5 FPS indicates that the CPU can process game logic and draw calls quickly enough to feed the GPU at very high rates. The boost clock of 5.00 GHz is particularly beneficial for single-threaded tasks, which are common in multiplayer game servers. The 12 cores and 20 threads also help when many players are present, as the simulation and network handling can be spread across threads. The CPU's nearest rivals in the database include the AMD Ryzen 7 PRO 5845 (average score 35,802, delta -0.3%) and the Intel Core i7-13700T (35,468, delta +0.6%). These small deltas indicate that the i7-12700K is competitive with newer and similarly positioned processors.

The measured FPS at 1440p and 4K shows that the CPU is not the primary bottleneck at those resolutions; the GPU takes over as the limiting factor. However, the CPU's ability to maintain high frame rates at 1080p suggests that it will not hold back the system in most gaming scenarios, even in CPU-intensive multiplayer environments like Fivem.

Settings Recommendations

Based on the measured FPS data, the optimal settings preset depends on the target resolution and desired frame rate. For 1080p, the Ultra preset delivers an average of 157.6 FPS, which is well above the 144 Hz refresh rate common on high-end monitors. Even the most demanding settings are playable, so users with 1080p displays can safely choose Ultra without sacrificing smoothness. The High preset at 198.1 FPS offers additional headroom for competitive play, but the visual difference between High and Ultra may be minimal in Fivem.

At 1440p, the High preset provides 133.1 FPS, which is excellent for a 144 Hz monitor. The Ultra preset at 104.6 FPS is also viable, especially for users who prioritize image quality over maximum frame rate. The Medium preset at 165.0 FPS is a good choice for those who want a high refresh rate with moderate visual fidelity. For 4K, the High preset at 72.1 FPS is the best balance between visual quality and performance, as it stays above 60 FPS. The Medium preset at 89.8 FPS offers even more headroom, while the Ultra preset at 58.5 FPS is borderline but still playable for a multiplayer game. The Low preset at 116.6 FPS is an option for users who demand very high frame rates at 4K, but it sacrifices significant visual detail.

The data suggests that High settings provide a consistent experience across all three resolutions: 198.1 FPS at 1080p, 133.1 FPS at 1440p, and 72.1 FPS at 4K. This preset offers a strong balance of visual quality and performance, making it the recommended starting point for most users. Those with 4K displays who prefer higher frame rates can step down to Medium, while those with 1080p displays can comfortably use Ultra. The measured results indicate that this combo is well-suited for Fivem, with no single component acting as a severe bottleneck at any tested resolution.