Fivem

The Intel Core i7-12700K paired with the NVIDIA GeForce RTX 3080 Ti delivers a dominant performance profile in Fivem, consistently producing high average frame rates across all tested resolutions and settings. The data indicates that this combination is exceptionally well-balanced for this multiplayer title, with the CPU providing ample headroom to feed the GPU at lower resolutions, while the GPU remains the primary scaling factor as resolution increases. Benchmark results show that the combo ranks in the 930th position out of 3707 tested combinations, placing it comfortably within the top quartile of all systems measured.

CPU Role — cores, clocks, and how they relate to this game's results

The Intel Core i7-12700K is a 12-core, 20-thread processor based on the Alder Lake architecture, built on Intel's 10 nm process node. It operates with a base clock of 3.60 GHz and a boost clock of 5.00 GHz, featuring a 25 MB shared L3 cache. The processor's benchmark scores reflect its strong multi-threaded and single-threaded capabilities: it scores 19,784 in Cinebench R23 multi-core and 1,850.5 in single-core, while achieving 15,790 in Geekbench multi-core and 2,308 in single-core. These figures place the CPU at the 84th percentile when compared to all CPUs, indicating that its processing power is well above average.

In the context of Fivem, a multiplayer modification platform that relies heavily on server-side scripting and client-side rendering, the CPU's thread count and clock speed are critical. The i7-12700K's 20 threads provide substantial parallel processing capacity, which helps maintain stable frame rates in crowded multiplayer environments where many entities and scripts are active. The high boost clock of 5.00 GHz ensures that single-threaded tasks, which are common in game logic and physics calculations, are executed with minimal latency. The 3DMark scores further illustrate the processor's scaling: it achieves 9,276 with 16 threads, 7,202 with 8 threads, 4,011 with 4 threads, and 2,065 with 2 threads, showing efficient multi-threading that benefits the game's workload. The PassMark multi-thread score of 34,404 and single-thread score of 4,013 reinforce this processor's ability to handle both the complex simulation aspects and the rapid response required for smooth gameplay.

The nearest rivals in synthetic benchmarks show that the i7-12700K is virtually tied with several other processors, being only 0.1% behind the Intel Core i5-13600T, 0.2% behind the Intel Core i7-12700KF, 0.3% behind the Intel Core i7-13700T, and 0.4% behind the Intel Core 5 213PE. This near-identical performance in general benchmarks suggests that the CPU is not a bottleneck in most gaming scenarios, and its role in Fivem is to provide consistent, high-throughput processing that allows the GPU to operate at its full potential.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the highest average frame rate this combo achieves at 1080p, and at which settings?

A: The highest average frame rate recorded is 259 FPS at 1920x1080 with Low settings. This indicates that the combination of the i7-12700K and RTX 3080 Ti has substantial performance headroom when visual fidelity is reduced, making it highly capable for competitive play where frame rate is prioritized over graphical detail.

Q: How does the combo rank among all tested systems in Fivem?

A: The combo ranks 930th out of 3707 tested combinations, placing it in the top 25% of all systems. This ranking reflects a strong overall performance, though it is not at the very top tier, suggesting that some higher-end configurations can achieve even greater frame rates in this specific game.

Q: What is the performance difference between 1080p and 4K at High settings?

A: At 1920x1080 High settings, the average frame rate is 163 FPS, while at 3840x2160 High settings, it drops to 60 FPS. This represents a 63% reduction in frame rate when scaling from Full HD to 4K, indicating that the GPU is heavily taxed at higher resolutions, and the CPU's role becomes less dominant.

Q: Are there any settings where the frame rate drops below 60 FPS at 4K?

A: Yes, at 3840x2160 with Ultra settings, the average frame rate is 46 FPS, which is below the 60 FPS threshold commonly considered the minimum for smooth gameplay. This is the only tested configuration where the combo fails to maintain a 60 FPS average, highlighting the extreme demand of Ultra settings at 4K resolution.

Q: How much faster is the combo at 1440p Medium compared to 1440p Ultra?

A: At 2560x1440 Medium settings, the average frame rate is 135 FPS with a minimum of 114 FPS, while at 2560x1440 Ultra settings, the average drops to 84 FPS. This shows a 51 FPS difference, or roughly 38% higher frame rate at Medium settings, which may be a worthwhile trade-off for users seeking higher refresh rates.

Q: What is the GPU's percentile ranking compared to all other GPUs?

A: The NVIDIA GeForce RTX 3080 Ti sits at the 83rd percentile when compared to all GPUs, with an average benchmark score of 41,187. Its nearest rivals include the AMD Radeon Pro 5300, which is 0.8% faster, and the NVIDIA GeForce RTX 5070, which is 2% faster, while the NVIDIA Tesla M40 24 GB is 1.2% slower and the Tesla M40 is 1.7% slower.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured data reveals a clear pattern of frame rate scaling as resolution increases, which provides insight into the bottleneck behavior of this combo. At 1920x1080, the system achieves remarkably high frame rates across all settings: 259 FPS at Low, 204 FPS at Medium, 163 FPS at High, and 127 FPS at Ultra. Moving to 2560x1440, the frame rates decrease proportionally: 171 FPS at Low, 135 FPS at Medium, 108 FPS at High, and 84 FPS at Ultra. At 3840x2160, the numbers drop further to 95 FPS at Low, 75 FPS at Medium, 60 FPS at High, and 46 FPS at Ultra.

The scaling from 1080p to 1440p shows an average reduction of approximately 35% across settings, while the drop from 1440p to 4K averages around 45%. This non-linear scaling is characteristic of GPU-bound scenarios, where the rendering workload increases exponentially with pixel count. At 1080p, the CPU's high single-thread performance (1,850.5 in Cinebench R23 single-core) and multi-thread capabilities (19,784 in multi-core) are sufficient to drive the GPU to its limits, resulting in very high frame rates. However, as resolution increases, the GPU's fill rate and memory bandwidth (912.4 GB/s) become the limiting factors, causing frame rates to drop more steeply.

The fact that at 4K Ultra the frame rate falls to 46 FPS, well below the 60 FPS achieved at 4K High, indicates that the RTX 3080 Ti's 12 GB of GDDR6X memory and its 34.10 TFLOPS FP32 performance are being fully utilized at this extreme setting. This suggests that for users targeting 4K gaming with this combo, lowering settings from Ultra to High is necessary to maintain playable frame rates, while at 1080p and 1440p, the system is primarily CPU-limited, allowing for maximum settings without sacrificing performance.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured FPS data, the optimal settings depend on the user's resolution and refresh rate priorities. For 1920x1080, all settings provide playable frame rates, but Ultra at 127 FPS average is the best choice for users with 120Hz monitors, as it offers high visual fidelity while still exceeding the refresh rate. For 1440p, Medium settings at 135 FPS average with a minimum of 114 FPS provide a balanced experience, allowing for smooth gameplay on 120Hz displays, while High at 108 FPS is better suited for 100Hz monitors. Ultra at 84 FPS may be acceptable for 75Hz screens but does not fully utilize higher refresh rates.

At 4K, the choices become more constrained. High settings at 60 FPS average is the baseline for a playable experience, matching the 60Hz refresh rate standard. Medium settings at 75 FPS provide a slight headroom, which can help reduce frame time spikes and improve consistency, as evidenced by the minimum FPS of 63 at this setting. Ultra at 46 FPS is not recommended, as it falls below the 60 FPS threshold and would result in noticeable stuttering and input lag. Therefore, the recommendation is to use High settings at 4K for a stable experience, or Medium if users prefer a small margin of error, while at 1080p and 1440p, Ultra and Medium/High settings respectively offer the best combination of visual quality and performance.

How This Combo Ranks — use comboRankInGame vs other tested combos

The Intel Core i7-12700K with the NVIDIA GeForce RTX 3080 Ti achieves a combo rank of 930 out of 3707 tested combinations in Fivem. This ranking places the system in the 75th percentile of all tested combos, meaning it outperforms approximately 75% of configurations. While this is a strong result, it is not at the very top of the leaderboard, indicating that there are 929 other combos that deliver higher frame rates. The gap between this combo and the top performers is likely due to more recent or higher-end CPUs and GPUs that offer greater raw performance, particularly in CPU-bound scenarios at lower resolutions.

The GPU's 83rd percentile ranking and the CPU's 84th percentile ranking suggest that both components are well-matched and perform consistently relative to their peers. However, the combo rank being slightly lower than either component's individual percentile indicates that the pairing may not be perfectly optimized for this specific game, or that Fivem's multiplayer nature places unique demands on the system that other hardware combinations handle better. This ranking provides context for users considering this build, showing that it is a solid performer but not the absolute best available for maximizing Fivem's frame rates.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured frame rates are presented below for each resolution and settings combination, providing a comprehensive view of the system's performance.

At 1920x1080:

• Low settings: average frame rate of 259 FPS.
• Medium settings: average frame rate of 204 FPS, with a minimum of 174 FPS and a maximum of 235 FPS.
• High settings: average frame rate of 163 FPS.
• Ultra settings: average frame rate of 127 FPS.

At 2560x1440:

• Low settings: average frame rate of 171 FPS.
• Medium settings: average frame rate of 135 FPS, with a minimum of 114 FPS and a maximum of 155 FPS.
• High settings: average frame rate of 108 FPS.
• Ultra settings: average frame rate of 84 FPS.

At 3840x2160:

• Low settings: average frame rate of 95 FPS.
• Medium settings: average frame rate of 75 FPS, with a minimum of 63 FPS and a maximum of 86 FPS.
• High settings: average frame rate of 60 FPS.
• Ultra settings: average frame rate of 46 FPS.

These figures demonstrate a consistent progression, with frame rates increasing as resolution decreases and settings are lowered. The Medium settings at each resolution provide the most complete data, including minimum and maximum FPS values, which offer insight into frame time consistency. For instance, at 4K Medium, the minimum FPS of 63 is only slightly below the average of 75, indicating relatively stable performance, whereas the lack of min/max data for other settings makes it difficult to assess variability. Overall, the data confirms that this combo delivers excellent performance at 1080p and 1440p, with playable frame rates at 4K when settings are managed appropriately.