Fivem

The AMD Ryzen 5 5600G paired with the AMD Radeon RX 6600 delivers a solid 1080p experience in Fivem, but the data reveals a clear performance ceiling as resolution increases. This combination ranks 1415th out of 1792 tested combos in this specific game, placing it in the lower-middle tier of the database. The benchmark results show a system that excels at high refresh rate 1080p gameplay but struggles to maintain playable frame rates at 4K, particularly with higher graphical presets.

Resolution Scaling

The measured FPS data shows a dramatic drop as resolution scales from 1920x1080 to 3840x2160. At 1080p with Low settings, the system achieves 149.1 FPS, which represents the peak performance of this combo. Moving to 1440p Low drops the average to 99.1 FPS, a reduction of 50 FPS or roughly 33.5%. At 4K Low, the average falls further to 55.8 FPS, representing a 62.6% decrease from the 1080p Low result. This scaling pattern indicates that the GPU becomes the primary limiting factor at higher resolutions, as the frame rate degradation aligns closely with the increased pixel count.

The settings impact at each resolution tells a similar story. At 1080p, the spread between Low and Ultra is 76.3 FPS (149.1 down to 72.8), showing that the system has enough headroom to handle quality increases without collapsing. At 1440p, the spread narrows to 53.3 FPS (99.1 down to 45.8), while at 4K it shrinks to 28.8 FPS (55.8 down to 27). This tightening spread at higher resolutions is a classic symptom of GPU-bound operation, where the graphics card's compute capacity, rather than the CPU or memory subsystem, dictates the final frame rate.

The 4K Ultra result of 27 FPS is particularly telling. This falls below the generally accepted threshold for smooth gameplay, and the gap between 4K Medium (41.8 FPS) and 4K Ultra (27 FPS) represents a 35.4% performance penalty. Interestingly, the jump from 1080p High (92.5 FPS) to 1440p High (62.3 FPS) shows a 32.6% reduction, while the jump from 1440p High to 4K High (33.9 FPS) shows a 45.6% reduction. The non-linear scaling suggests that memory bandwidth constraints begin to emerge at 4K, as the RX 6600's 224.0 GB/s bandwidth becomes a bottleneck for the increased data throughput required at that resolution.

CPU Role

The AMD Ryzen 5 5600G is a 6-core, 12-thread processor based on the Zen 3 architecture, manufactured on TSMC's 7 nm process. It features a base clock of 3.90 GHz and a boost clock of 4.40 GHz, with 16 MB of L3 cache. In the database's CPU benchmarks, this processor achieves a Cinebench R23 multicore score of 16758 and a single-core score of 2365. Its average benchmark score of 19983 places it in the 78th percentile of all CPUs, with the nearest rival being the Intel Core i7-11600H at a 0.2% advantage.

In the context of Fivem, the CPU's role appears secondary to the GPU at higher resolutions, but its single-thread performance is crucial for the game's multiplayer logic. The single-core Cinebench R20 score of 993 and Geekbench single-core score of 1933 indicate adequate per-thread capability for handling game server communication and entity updates. The 3DMark single-thread score of 872 further confirms this, though the 3DMark 2-thread score of 1705 shows that the processor scales reasonably well with additional threads.

The 5600G's integrated Radeon Vega 7 graphics are present but irrelevant in this configuration, as the discrete RX 6600 handles all rendering duties. The CPU's 65W TDP and dual-channel DDR4 memory support provide sufficient bandwidth for feeding the GPU, though the 51.2 GB/s memory bandwidth is modest compared to the GPU's own 224.0 GB/s. The benchmark data shows that at 1080p Low, the system achieves 149.1 FPS, which likely approaches the CPU's frame delivery limit in this game. The fact that increasing resolution to 1440p Low only drops the frame rate to 99.1 FPS suggests that the CPU is not the primary bottleneck at lower resolutions, but rather the GPU's pixel throughput capabilities.

GPU Role

The AMD Radeon RX 6600 is built on the RDNA 2.0 architecture with the Navi 23 chip, fabricated on TSMC's 7 nm process. It features 8 GB of GDDR6 memory on a 128-bit bus, providing 224.0 GB/s of bandwidth. The GPU operates at a base clock of 1626 MHz with a boost clock of 2491 MHz, and its 1792 shading units deliver 8.928 TFLOPS of FP32 performance. The 132W TDP and 300W suggested PSU requirement make this a relatively power-efficient card for its class.

The GPU's benchmark results show a Passmark G3D score of 15096 and a 3DMark Steel Nomad DX12 score of 1492, with an average benchmark score of 25235 placing it in the 69th percentile of all GPUs. Its nearest rival, the AMD Radeon 890M, matches its score exactly with a 0% delta. The RTX 3060 Ti sits just 0.5% ahead, indicating that the RX 6600 performs in a tightly contested mid-range segment.

In Fivem, the GPU's role becomes increasingly dominant as resolution increases. The 4K results show the most severe degradation, with the card dropping from 55.8 FPS at Low settings to 27 FPS at Ultra settings. This 51.6% performance penalty from Low to Ultra at 4K demonstrates the GPU's compute and bandwidth limitations under heavy load. The 8 GB VRAM capacity is sufficient for this game at 1080p and 1440p, but the 128-bit memory bus and 224.0 GB/s bandwidth become constraining at 4K, particularly with higher texture quality settings that require more data to be fetched from memory.

The texture rate of 279.0 GTexel/s and pixel rate of 159.4 GPixel/s provide context for the scaling behavior. At 1080p, the GPU can easily maintain high frame rates across all settings, with the lowest result being 72.8 FPS at Ultra. At 1440p, the Ultra setting drops to 45.8 FPS, which is still playable but shows the onset of GPU-bound operation. The 4K Ultra result of 27 FPS represents the worst-case scenario, where the GPU's fill rate and bandwidth are insufficient to maintain smooth gameplay.

How This Combo Ranks

This combination ranks 1415th out of 1792 tested combos in Fivem, placing it in the bottom 21% of all configurations in the database. This rank is notably lower than what the individual component percentiles might suggest, as the CPU sits in the 78th percentile and the GPU in the 69th percentile. The discrepancy indicates that Fivem's specific performance characteristics, likely related to its multiplayer nature and server-side processing demands, do not favor this particular pairing.

The rank suggests that while each component is mid-tier in isolation, their combination does not produce synergies that boost performance in this game. The CPU's 6-core/12-thread configuration with a 16 MB L3 cache provides adequate processing power, but the GPU's mid-range positioning means that the system as a whole falls behind more balanced or higher-end configurations. The 1080p High result of 92.5 FPS and 1440p High result of 62.3 FPS are respectable figures, but the rank reflects that many other tested combos achieve higher frame rates in Fivem.

The data shows that this combo is best suited for 1080p gaming, where it can deliver above 90 FPS at High settings and 149.1 FPS at Low settings. For 1440p gaming, the user would need to compromise on settings to maintain playable frame rates, with Medium settings yielding 74 FPS and High settings at 62.3 FPS. At 4K, the system is only viable at Low settings (55.8 FPS) or Medium settings (41.8 FPS), with Ultra settings proving unplayable at 27 FPS.

FAQ

Q: What is the best resolution and settings combination for this system in Fivem?

A: The data shows 1080p Low achieves 149.1 FPS, 1080p Medium achieves 114 FPS, and 1080p High achieves 92.5 FPS. For 1440p, Medium settings at 74 FPS is the highest playable option, while 4K is only viable at Low settings with 55.8 FPS.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 5 5600G has an average benchmark score of 19983, which is 0.2% behind the Intel Core i7-11600H (19949) and 0.2% ahead of the Intel Core i7-11800H (20024). It also matches closely with the AMD EPYC 7713P and Threadripper PRO 5995WX, which have delta percentages of -0.2% and 0.3% respectively.

Q: How does the GPU compare to its nearest rivals?

A: The RX 6600 has an average benchmark score of 25235, which is exactly matched by the AMD Radeon 890M (0% delta). It is 0.2% behind the Radeon RX 580 2048SP (25287) and 0.2% ahead of the Radeon RX 6700M (25180). The RTX 3060 Ti sits 0.5% ahead with a score of 25120.

Q: What is the frame rate drop from 1080p to 4K at High settings?

A: At High settings, the system delivers 92.5 FPS at 1080p, 62.3 FPS at 1440p, and 33.9 FPS at 4K. This represents a 32.6% drop from 1080p to 1440p and a further 45.6% drop from 1440p to 4K, totaling a 63.4% reduction from 1080p to 4K.

Q: Is the CPU or GPU the limiting factor at different resolutions?

A: At 1080p, the spread between Low and Ultra settings is 76.3 FPS, suggesting the GPU has enough headroom to handle quality increases. At 4K, the spread narrows to 28.8 FPS, indicating the GPU becomes the primary bottleneck as pixel count increases and the memory bandwidth of 224.0 GB/s is stressed.

Q: What are the key specifications of this CPU and GPU pairing?

A: The CPU has 6 cores, 12 threads, a base clock of 3.90 GHz, and a boost clock of 4.40 GHz with 16 MB of L3 cache. The GPU has 8 GB of GDDR6 memory on a 128-bit bus, a boost clock of 2491 MHz, and 1792 shading units delivering 8.928 TFLOPS of FP32 performance.