Archeage

The AMD Ryzen 7 5800XT paired with the Intel Arc B580 in Archeage produces a combination that is heavily constrained by the graphics card at higher resolutions, while the CPU’s strong multi-threaded performance becomes the primary driver at 1080p. Benchmark results show this combo ranking in the 2797th position out of 3708 tested combinations, placing it in the lower half of the database. The measured frame rates reveal a pattern where the Intel Arc B580’s 12 GB VRAM and 2670 MHz boost clock are sufficient for 1080p medium settings, but the GPU’s overall throughput limits the experience at 1440p and 4K, where the Ryzen 7 5800XT’s 8 cores and 16 threads are left underutilized.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and consistent, indicating that the Intel Arc B580 is the limiting component as pixel count increases. At 1080p Low settings, the combo achieves 124 FPS, but this falls to 84 FPS at 1440p Low, a reduction of 40 FPS, and then to 48 FPS at 4K Low. The scaling from 1440p to 4K at Low settings shows a 36 FPS loss, which is a 42.9% decrease, demonstrating that the GPU’s rendering capacity is being exhausted well before the CPU becomes a bottleneck. For High settings, the progression is 75 FPS at 1080p, 51 FPS at 1440p, and 29 FPS at 4K, with the 4K result falling below the 30 FPS playability threshold. This pattern is typical of a GPU-bound scenario, where the Arc B580’s 13.67 TFLOPS FP32 performance and 456.0 GB/s memory bandwidth are simply not enough to maintain fluid frame rates at 3840x2160.

The Medium preset provides the most complete data, with minimum and maximum frame rates recorded at every resolution. At 1080p Medium, the average is 111 FPS with minimums of 94 FPS and maximums of 127 FPS, showing a tight frame time distribution that suggests consistent performance. Moving to 1440p Medium, the average drops to 75 FPS, with minimums of 63 FPS and maximums of 86 FPS, while 4K Medium yields an average of 43 FPS with minimums of 36 FPS and maximums of 49 FPS. The 4K Medium minimum of 36 FPS is telling, as it indicates that even with moderate settings, the combo cannot maintain a stable 60 FPS experience at that resolution, and the 29 FPS average at 4K High confirms that 4K gaming is not viable for this pairing unless the user accepts Low settings.

The scaling behavior also reveals that the Ryzen 7 5800XT is not the primary constraint at higher resolutions. If the CPU were the bottleneck, frame rates would remain relatively flat across resolutions, as the processor would be the limiting factor regardless of pixel count. Instead, the data shows a clear inverse relationship between resolution and performance, with 4K results being roughly half of 1080p results across all settings. This suggests that the Arc B580’s 192-bit memory bus and 80 ROPs are saturated at 4K, while the CPU’s 32 MB shared L3 cache and 3.80 GHz base clock are more than adequate to feed the GPU at lower resolutions. The 1080p Low result of 124 FPS is particularly informative, as it approaches the upper limits of what this GPU can deliver, and the fact that 1080p Ultra only reaches 51 FPS indicates that the GPU’s shading units and texture units are the limiting factor, not the CPU’s 4.80 GHz boost clock.

GPU Role

The Intel Arc B580’s memory configuration and clock speeds play a decisive role in Archeage’s performance, particularly at higher settings and resolutions. The GPU features 12 GB of GDDR6 memory on a 192-bit bus, providing 456.0 GB/s of bandwidth, which is sufficient for the game’s textures at 1080p and 1440p but becomes strained at 4K. The 2670 MHz base and boost clock are identical, meaning the GPU operates at a consistent frequency under load, which helps explain the relatively stable frame times seen at Medium settings. The 2560 shading units and 160 texture mapping units are the workhorses for this MMORPG’s rendering, and the data shows that they are capable of delivering 111 FPS at 1080p Medium but only 43 FPS at 4K Medium, a 61.3% performance drop.

The VRAM capacity of 12 GB is not a limiting factor in this game, as even at 4K Ultra, the combo manages 20 FPS, indicating that memory allocation is not causing out-of-memory errors or texture thrashing. Instead, the GPU’s raw compute throughput, measured at 13.67 TFLOPS FP32, is the bottleneck. The 4K Ultra result of 20 FPS is particularly poor, suggesting that the Arc B580’s 20 ray tracing cores and 80 ROPs are overwhelmed by the game’s Ultra preset, which likely includes high-resolution shadows and post-processing effects that tax the GPU’s pixel rate of 213.6 GPixel/s. The passmark G3D score of 15748 places this GPU in the 68th percentile of all GPUs, and its nearest rivals include the NVIDIA GeForce RTX 2080 with a deltaPct of 0.6 and the RTX 3080 with a deltaPct of -0.7, indicating that the Arc B580 performs similarly to those older high-end cards in synthetic benchmarks.

In Archeage specifically, the GPU’s performance at 1080p High (75 FPS) versus 1080p Low (124 FPS) shows a 49 FPS difference, which is a 39.5% improvement from lowering settings. This suggests that the GPU’s texture fill rate of 427.2 GTexel/s is being heavily utilized by the High preset’s texture quality, while the Low preset reduces that load significantly. The Medium preset’s minimum frame rates at 1080p (94 FPS) and 1440p (63 FPS) are both above 60 FPS, making it the only preset that provides a consistently smooth experience across those two resolutions. The 4K Medium minimum of 36 FPS is below the 60 FPS threshold, confirming that the GPU’s memory bandwidth of 456.0 GB/s is insufficient for 4K gaming with this settings level.

Settings Recommendations

Based on the measured frame rates, the Medium preset at 1080p offers the best balance of visual quality and performance for this combo, with an average of 111 FPS and a minimum of 94 FPS. This ensures that even in crowded MMORPG scenes, frame rates remain above 90 FPS, providing a smooth experience. The High preset at 1080p is also viable, with an average of 75 FPS, but the minimum frame rate is not recorded, so there is less certainty about worst-case performance. For users who prioritize frame rate over visual fidelity, the Low preset at 1080p delivers 124 FPS, which is the highest measured result for this pairing, but the visual downgrade may not be worth the 13 FPS improvement over Medium.

At 1440p, the Medium preset is the only recommended option, as it achieves an average of 75 FPS with minimums of 63 FPS, which is just above the 60 FPS threshold. The 1440p High preset drops to 51 FPS, which is playable but may experience noticeable stuttering in busy areas, while 1440p Low reaches 84 FPS, offering a smoother experience at the cost of visual quality. The 1440p Ultra preset is not recommended, as the 35 FPS average is too low for a game that requires quick reactions in PvP scenarios. For 4K, none of the presets provide an ideal experience, but the Low preset at 48 FPS is the most playable, while Medium at 43 FPS and High at 29 FPS are marginal. The Ultra preset at 20 FPS is essentially unplayable and should be avoided.

The data shows that the Medium preset provides the most consistent frame times, as evidenced by the recorded minimum and maximum values at all three resolutions. At 1080p, the range from 94 to 127 FPS indicates a 33 FPS spread, which is acceptable for an MMORPG. At 1440p, the range from 63 to 86 FPS is tighter, suggesting that the GPU is more consistently loaded. At 4K, the range from 36 to 49 FPS shows a 13 FPS spread, which is relatively narrow but still below the playability threshold. Users with 1080p monitors should select Medium for the best experience, while those with 1440p monitors can also use Medium, but they should be prepared for frame rates in the 60-80 FPS range. The Low preset is the only viable option for 4K, and even then, the 48 FPS average may not satisfy players who are accustomed to higher frame rates.

How This Combo Ranks

The combo’s rank of 2797 out of 3708 tested combinations places it in the 75.4th percentile of all tested pairings, meaning that roughly a quarter of all combos in the database perform worse. However, this ranking position indicates that the AMD Ryzen 7 5800XT and Intel Arc B580 are not a top-tier pairing for Archeage, as the GPU’s performance is below what the CPU can support. The CPU’s percentileVsAllCpus of 81 and the GPU’s percentileVsAllGpus of 68 suggest that the CPU is significantly stronger than the GPU, which is confirmed by the frame rate data showing the GPU as the bottleneck at higher resolutions. This imbalance means that the combo is held back by the Arc B580, and users would see better overall performance by pairing the Ryzen 7 5800XT with a more powerful GPU.

The CPU’s nearest rivals include the AMD Ryzen 7 7840H with an avgScore of 29868 and a deltaPct of 0, the AMD Ryzen 7 8845HS with a deltaPct of -0.3, and the AMD Ryzen 5 9600X with a deltaPct of 0.6. These rival CPUs all have similar average benchmark scores, indicating that the Ryzen 7 5800XT’s performance is on par with these newer mobile and desktop processors. The GPU’s nearest rivals include the AMD Radeon RX 580 2048SP with a deltaPct of -0.2, the NVIDIA GeForce RTX 2080 with a deltaPct of 0.6, and the RTX 3080 with a deltaPct of -0.7. This places the Arc B580 in the same performance tier as these older high-end GPUs, which explains why it struggles with 4K gaming in Archeage.

The combo rank of 2797 suggests that this pairing is better suited for 1080p gaming, where the GPU can keep up with the CPU’s capabilities. At 1080p Medium, the combo achieves 111 FPS, which would place it in the upper echelon of performance for that resolution. However, the rank is pulled down by the poor 4K performance, where the combo falls below 30 FPS at High and Ultra settings. The data indicates that users who play at 1080p will be satisfied with this combo, while those who attempt 1440p or 4K will find the experience lacking. The rank also reflects the fact that the Arc B580’s 12 GB VRAM is not a differentiator in this game, as the 4K Ultra result of 20 FPS shows that the GPU’s compute power is the limiting factor, not its memory capacity.

CPU Role

The AMD Ryzen 7 5800XT’s 8 cores and 16 threads are more than sufficient for Archeage, as the game is not heavily multi-threaded and primarily relies on single-thread performance for its game logic. The CPU’s 3.80 GHz base clock and 4.80 GHz boost clock provide strong single-threaded performance, as evidenced by its 3dmark_single_thread score of 959 and cinebench_r23_singlecore score of 3359. The 32 MB shared L3 cache helps reduce memory latency, which is beneficial for MMORPGs that often have complex world state calculations. The CPU’s passmark_single_thread score of 3535 places it in the 81st percentile of all CPUs, indicating that it handles the game’s single-threaded tasks with ease.

The CPU’s multi-threaded performance is also strong, with cinebench_r23_multicore score of 23794 and passmark_multithread score of 28053. These scores show that the Ryzen 7 5800XT can handle background tasks and other applications while running Archeage, but the game itself does not benefit significantly from more than a few cores. The 3dmark_16_threads score of 7683 and 3dmark_max_threads score of 7680 are nearly identical, suggesting that the CPU’s performance does not scale beyond 8 threads, which is consistent with the game’s modest threading requirements. In Archeage, the CPU is not the bottleneck at any resolution, as the frame rates are limited by the GPU’s rendering capabilities rather than the CPU’s processing speed.

The CPU’s memory support for DDR4 with dual-channel configuration and 51.2 GB/s bandwidth is adequate for this game, as Archeage does not require high memory bandwidth. The 7 nm process node and TSMC foundry manufacturing ensure that the CPU operates efficiently, with a TDP of 105 W that is manageable for most cooling solutions. The socket AM4 compatibility and PCIe Gen 4 support with 20 lanes provide sufficient bandwidth for the Arc B580’s PCIe 4.0 x8 interface, ensuring that the GPU is not starved for data. The CPU’s benchmark scores, including 3dmark_2_threads of 1879 and 3dmark_4_threads of 3603, show that it excels in lightly threaded workloads, which is exactly what Archeage requires. This means that the CPU is never the limiting factor in this combo, and users upgrading from a weaker CPU would see minimal frame rate improvements in this game.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best performance across all settings. The Low preset achieves 124 FPS average, which is the highest measured frame rate for this pairing. The Medium preset follows with 111 FPS average, with minimums of 94 FPS and maximums of 127 FPS. The High preset reaches 75 FPS average, while the Ultra preset drops to 51 FPS average. The 1080p results show that the combo is capable of exceeding 120 FPS at Low settings, but the Ultra preset’s 51 FPS is below the 60 FPS threshold, indicating that the GPU’s performance is insufficient for the highest quality settings even at this resolution.

At 2560x1440, the frame rates decrease significantly across all settings. The Low preset achieves 84 FPS average, the Medium preset reaches 75 FPS average with minimums of 63 FPS and maximums of 86 FPS, the High preset drops to 51 FPS average, and the Ultra preset falls to 35 FPS average. The 1440p Medium result of 75 FPS is the only setting that maintains an average above 60 FPS, while the High and Ultra presets fall below that threshold. The 1440p Low result of 84 FPS is higher than the High preset at 1080p, suggesting that the GPU’s performance is more affected by settings than resolution, which is a common characteristic of MMORPGs where draw distances and shadow quality have a significant impact.

At 3840x2160, the frame rates are consistently low, with the Low preset achieving 48 FPS average, the Medium preset reaching 43 FPS average with minimums of 36 FPS and maximums of 49 FPS, the High preset dropping to 29 FPS average, and the Ultra preset falling to 20 FPS average. None of the 4K presets achieve the 60 FPS threshold, and even the Low preset’s 48 FPS is below what most players would consider smooth. The 4K Medium minimum of 36 FPS is particularly concerning, as it indicates that the combo cannot maintain a consistent frame rate even at moderate settings. The 4K results clearly show that this pairing is not suitable for 4K gaming, and users with 4K monitors should either reduce the resolution to 1440p or accept frame rates below 50 FPS.

The measured FPS data also includes minimum and maximum values for the Medium preset at each resolution, providing insight into frame time consistency. At 1080p, the 94 FPS minimum and 127 FPS maximum show a 33 FPS spread, which is acceptable. At 1440p, the 63 FPS minimum and 86 FPS maximum show a 23 FPS spread, indicating more stable performance. At 4K, the 36 FPS minimum and 49 FPS maximum show a 13 FPS spread, which is the tightest range but at a low overall level. This suggests that the GPU’s frame pacing is consistent at 4K, but the absolute performance is too low for a playable experience. The lack of minimum and maximum data for the Low, High, and Ultra presets means that the Medium preset provides the most complete picture of the combo’s performance characteristics, and it is the recommended setting for users who want to balance visual quality with frame rate stability.