Archeage

The AMD Ryzen 7 5800XT paired with the AMD Radeon RX 9070 delivers a performance profile in Archeage that is heavily dictated by resolution and preset selection. The measured frame rates show a clear transition from a CPU-bound scenario at lower resolutions to a GPU-bound scenario at 4K, with the Ultra preset proving particularly demanding across the board.

Resolution Scaling

The data reveals a predictable yet significant drop in average frame rate as resolution increases, but the magnitude of that drop varies considerably by settings preset. At Low settings, the transition from 1920x1080 to 2560x1440 results in a decline from 202.1 FPS to 132.9 FPS, a reduction of approximately 34%. Moving further to 3840x2160 at Low settings yields 76.8 FPS, which is 62% lower than the 1080p result. This steep curve indicates that even at Low settings, the RX 9070’s rendering load scales aggressively with pixel count.

The Medium preset shows a similar pattern: 174.6 FPS at 1080p, 121.6 FPS at 1440p, and 69.7 FPS at 4K. The percentage drop from 1080p to 4K here is about 60%, nearly identical to the Low preset’s scaling. High settings follow the trend with 119.2 FPS at 1080p, 82.5 FPS at 1440p, and 45.7 FPS at 4K, representing a 62% decline from the lowest to highest resolution. This consistency across presets suggests that the resolution scaling factor is relatively uniform, driven primarily by the GPU’s fillrate and shading capabilities rather than the specific visual complexity of each preset.

Ultra settings, however, present a steeper cliff. At 1080p, Ultra averages 83.4 FPS, which drops to 56.7 FPS at 1440p and then plummets to 28.4 FPS at 4K. The 4K Ultra result is 66% lower than the 1080p Ultra figure, a larger relative decline than seen in other presets. This indicates that the Ultra preset introduces effects that disproportionately tax the GPU at higher resolutions, likely related to advanced shading or post-processing that scales super-linearly with pixel count.

The limiting component shifts clearly across the resolution spectrum. At 1080p, the gap between Low (202.1 FPS) and Medium (174.6 FPS) is noticeable, but the jump to High (119.2 FPS) is substantial. This suggests that at 1080p, the CPU’s ability to feed the GPU becomes a factor, especially at lower presets where the GPU has headroom. The Ryzen 7 5800XT’s boost clock of 4.80 GHz and 8 cores / 16 threads provide strong single-thread performance, but Archeage’s engine appears to cap frame delivery somewhere above 200 FPS. At 4K, the GPU becomes the clear bottleneck; the difference between Low (76.8 FPS) and High (45.7 FPS) is large, showing that the RX 9070’s compute throughput, rated at 36.13 TFLOPS FP32, is the primary constraint.

How This Combo Ranks

Within the database of tested combos for Archeage, this configuration holds a rank of 547 out of 1727, placing it in the upper third of all tested pairings. This percentile position, approximately in the 68th percentile, reflects a balanced mid-to-high tier performance level. The CPU itself sits in the 86th percentile against all CPUs, with an average benchmark score of 29774. Its nearest rivals include the AMD Ryzen 7 PRO 5755GE (score 29740, delta 0.1%), the AMD Ryzen 7 6800HS (score 29856, delta -0.3%), and the AMD Ryzen AI 7 PRO 360 (score 29682, delta 0.3%). These deltas are all within a fraction of a percent, showing that the 5800XT is squarely in a tightly packed cluster of comparable processors.

The GPU, in contrast, sits in the 79th percentile against all GPUs with an average benchmark score of 34780. Its nearest rivals are the NVIDIA A2 (score 34866, delta -0.2%), the NVIDIA Quadro GV100 (score 34677, delta 0.3%), the AMD Radeon HD 7970 (score 34541, delta 0.7%), and the AMD Radeon PRO W6400 (score 34511, delta 0.8%). These are unusual competitors—professional and older cards—which suggests the RX 9070’s raw compute metrics do not translate directly to gaming performance in this title. The combo’s rank of 547 reflects a situation where the CPU’s relative strength is higher than the GPU’s, yet the in-game results at 1080p and 1440p show the pairing is more than capable of high refresh rate play.

Benchmark results indicate that the combo’s positioning is not extreme in either direction. It does not crack the top tier of Archeage setups, but it also does not fall into the lower quartile. The measured FPS at 1080p Medium (174.6 FPS) and High (119.2 FPS) suggest that this pairing is suitable for smooth gameplay on high-refresh monitors, while the 4K Ultra result of 28.4 FPS clearly delineates its limits at maximum visual fidelity.

FAQ

Q: What is the best resolution for this combo to maintain a 60 FPS average?

A: At 2560x1440, the Medium preset delivers 121.6 FPS and High delivers 82.5 FPS, both comfortably above 60 FPS. Even at 3840x2160, the Medium preset averages 69.7 FPS, which is above the 60 FPS threshold, though High dips to 45.7 FPS.

Q: How does the Ultra preset perform at different resolutions?

A: The Ultra preset yields 83.4 FPS at 1920x1080, 56.7 FPS at 2560x1440, and 28.4 FPS at 3840x2160. This shows a severe drop at 4K, making Ultra at that resolution impractical for smooth play.

Q: Is the CPU or GPU the limiting factor at 1080p?

A: At 1920x1080 with Low settings, the average FPS is 202.1, which is exceptionally high. The Ryzen 7 5800XT’s single-thread score of 3359 in Cinebench R23 suggests it can keep up, but the drop to 119.2 FPS at High settings indicates the GPU starts to become the constraint as visual load increases.

Q: What is the frame rate difference between Low and Ultra at 1440p?

A: At 2560x1440, Low averages 132.9 FPS while Ultra averages 56.7 FPS. This represents a 76.2 FPS difference, or a 57% reduction in performance when switching to the highest preset.

Q: Does the combo rank higher in CPU or GPU performance relative to other components?

A: The CPU’s percentile is 86, while the GPU’s percentile is 79. Within the game’s combo ranking, this pairing sits at 547 out of 1727, indicating the CPU’s relative strength does not fully compensate for the GPU’s lower standing in this specific title.

Q: Can this combo achieve 144 FPS at any setting?

A: Yes, at 1920x1080 with Medium settings, the average FPS is 174.6, and at Low settings it reaches 202.1 FPS. At 2560x1440, only the Low preset exceeds 144 FPS, with an average of 132.9 FPS.

Measured FPS Breakdown

At 1920x1080, the measured results span a wide range. Low settings produce an average of 202.1 FPS, Medium yields 174.6 FPS, High drops to 119.2 FPS, and Ultra falls to 83.4 FPS. The step from Low to Medium is relatively modest at 27.5 FPS, but the step from Medium to High is a substantial 55.4 FPS decline, indicating a significant increase in GPU workload. The Ultra preset further reduces performance by 35.8 FPS from High.

Moving to 2560x1440, the averages are 132.9 FPS for Low, 121.6 FPS for Medium, 82.5 FPS for High, and 56.7 FPS for Ultra. The gap between Low and Medium narrows considerably to just 11.3 FPS, suggesting that the GPU is becoming more of a limiting factor at this resolution. The drop from Medium to High is 39.1 FPS, and from High to Ultra is 25.8 FPS.

At 3840x2160, the results compress further. Low averages 76.8 FPS, Medium 69.7 FPS, High 45.7 FPS, and Ultra 28.4 FPS. The difference between Low and Medium here is only 7.1 FPS, showing that the pixel fillrate is the dominant constraint. The gap from Medium to High is 24.0 FPS, and High to Ultra is 17.3 FPS. The single lowest measured result is 4K Ultra at 28.4 FPS, which is below playable thresholds for most users, while the highest is 1080p Low at 202.1 FPS.

Settings Recommendations

Based on the measured rows, the optimal experience depends on the target display resolution. For 1920x1080, the Medium preset at 174.6 FPS offers an excellent balance between visual quality and frame rate, as it remains well above 144 FPS for high-refresh monitors. The High preset at 119.2 FPS is still smooth for 60 Hz displays and provides better visuals, but the step down from Medium is noticeable. Ultra at 83.4 FPS is acceptable for slower-paced MMO gameplay but not ideal for fast action.

At 2560x1440, the Medium preset at 121.6 FPS is the recommended choice for most users, as it stays above 100 FPS and offers good detail. The Low preset at 132.9 FPS is only marginally faster and does not justify the visual compromise. High at 82.5 FPS is playable for 60 Hz monitors but sacrifices the smoothness that the Medium preset provides. Ultra at 56.7 FPS is borderline, dipping below the 60 FPS threshold that many consider the minimum for acceptable play.

For 3840x2160, the Medium preset at 69.7 FPS is the only option that clears 60 FPS, making it the clear recommendation for 4K displays. Low at 76.8 FPS is also viable but offers reduced visual fidelity for only a 7.1 FPS gain. High at 45.7 FPS and Ultra at 28.4 FPS are not recommended, as they fall below acceptable smoothness levels and would likely cause noticeable stutter in crowded MMO scenes. The data suggests that Medium is the sweet spot across all resolutions, balancing the RX 9070’s compute capabilities with the game’s engine demands.

CPU Role

The AMD Ryzen 7 5800XT is built on the Zen 3 architecture with a 7 nm process, featuring 8 cores and 16 threads. Its base clock of 3.80 GHz boosts up to 4.80 GHz, providing strong single-thread performance that is critical for MMO titles like Archeage, which often rely on a main thread for game logic. The CPU’s Cinebench R23 single-core score of 3359 and multi-core score of 23794 indicate robust processing power, though the multi-core advantage is less relevant in this genre where thread scaling is limited.

The CPU’s cache hierarchy includes 64 KB of L1 per core, 512 KB of L2 per core, and a 32 MB L3 cache. This large L3 cache helps reduce memory latency for frequently accessed data, which can benefit frame pacing. The memory bandwidth of 51.2 GB/s with dual-channel DDR4 support is adequate for the game’s requirements, though it is not a standout figure. The CPU’s 3DMark scores show a scaling pattern: 1879 for 2 threads, 3603 for 4 threads, 6141 for 8 threads, and 7683 for 16 threads. This indicates near-linear scaling up to 8 threads, with diminishing returns beyond that, suggesting that Archeage’s engine likely utilizes up to 8 threads effectively.

In the context of measured FPS, the CPU’s role is evident at 1080p Low where the average reaches 202.1 FPS. This high frame rate is likely near the engine’s ceiling, as the CPU’s single-thread performance (959 in 3DMark single-thread) may cap the rendering pipeline. The fact that the 4K Low result is 76.8 FPS—a 62% reduction from 1080p Low—while the CPU workload remains constant shows that the GPU is the primary limiter at higher resolutions. The CPU’s nearest rivals, such as the AMD Ryzen 7 7840H with a score of 29868 (delta -0.3%), are statistically identical in performance, confirming that the 5800XT is well-matched to its peer group. For Archeage specifically, the CPU provides enough headroom to avoid bottlenecking the RX 9070 at 1080p and 1440p, but at 4K the GPU’s processing limits dominate the frame rate outcomes.