Fivem

Fivem’s measured performance with the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 3070 places this pairing at rank 808 out of 1792 tested combinations. This mid-field position reflects a balanced system where the 6-core, 12-thread CPU and the 8 GB Ampere GPU both contribute meaningfully, though neither dominates the other. The data shows a configuration that scales predictably with resolution and settings, making it a dependable baseline for multiplayer sessions.

FAQ

Q: What is the combo’s overall rank in Fivem?

A: The AMD Ryzen 5 7600 and NVIDIA GeForce RTX 3070 combination ranks 808 out of 1792 tested combos in Fivem, placing it in the 45th percentile of all tested pairings.

Q: How does the CPU compare to its nearest rival in average benchmark score?

A: The Ryzen 5 7600 has an average benchmark score of 26617, which is 0.2% higher than the AMD Ryzen 7 5800X3D (26574) and 0.2% lower than the Intel Core i9-12900HK (26672).

Q: What is the GPU’s memory capacity and type?

A: The NVIDIA GeForce RTX 3070 features 8 GB of GDDR6 memory on a 256-bit bus, delivering 448.0 GB/s of bandwidth.

Q: What is the highest average FPS recorded for this combo in Fivem?

A: The highest average FPS recorded is 218.2, achieved at 1920x1080 resolution with Low settings.

Q: What is the lowest average FPS recorded for this combo in Fivem?

A: The lowest average FPS recorded is 39.8, achieved at 3840x2160 resolution with Ultra settings.

Q: Does the CPU support overclocking?

A: Yes, the AMD Ryzen 5 7600 has an unlocked multiplier, allowing for overclocking.

How This Combo Ranks

The combo’s rank of 808 out of 1792 tested combinations in Fivem indicates a solid, upper-mid-tier standing. This position suggests that while the pairing is not at the bleeding edge of performance, it sits comfortably ahead of more than half of all tested systems. The rank is a composite outcome of the CPU’s 83rd percentile standing among all CPUs and the GPU’s 72nd percentile among all GPUs. The CPU’s higher percentile relative to the GPU suggests that in Fivem, the processor’s headroom may be slightly more of a differentiator than the graphics card’s raw output.

When interpreting this rank, it is important to note that the CPU’s average benchmark score of 26617 places it within 0.3% of the Intel Core i9-11900K (26546) and 0.2% of the AMD EPYC 8024P (26555). This tight clustering means that the Ryzen 5 7600 is effectively in the same performance class as these rivals, with any differences being within measurement noise. The GPU, with an average score of 28238, sits 0.9% above the AMD Radeon RX 6600 XT (27985) and 1% above the NVIDIA GeForce GTX 980 Ti (27956), again indicating a performance tier rather than a leader. In Fivem’s multiplayer environments, where frame times can be erratic, this rank suggests a system that will maintain playable framerates at most settings, but may struggle to reach the highest refresh rates at maximum quality.

CPU Role

The AMD Ryzen 5 7600 is built on the Zen 4 architecture, codenamed Raphael, fabricated on TSMC’s 5 nm process with 6,570 million transistors on a 71 mm² die. It features 6 cores and 12 threads, with a base clock of 3.80 GHz and a boost clock of 5.10 GHz. The CPU’s cache hierarchy includes 64 KB L1 per core, 1 MB L2 per core, and 32 MB shared L3. This configuration supports DDR5 memory via a dual-channel bus, providing 83.2 GB/s of bandwidth.

In Fivem, the CPU’s role is significant due to the game’s multiplayer nature, which often involves numerous entities and scripts. The benchmark results show that the 6-core, 12-thread setup delivers a Cinebench R23 multicore score of 22992 and a single-core score of 3246. The single-thread performance, reflected in a 3DMark single-thread score of 999, is crucial for Fivem’s main game thread, which typically cannot offload all work to multiple cores. The data indicates that the CPU’s boost clock of 5.10 GHz provides adequate headroom for this workload, as evidenced by the measured FPS scaling across resolutions.

The CPU’s 65 W TDP and active production status suggest it is a mainstream part, and its 83rd percentile ranking among all CPUs means it outperforms the vast majority of processors in general benchmarks. In Fivem specifically, the CPU’s ability to maintain high single-thread performance is likely the limiting factor at lower resolutions, where FPS exceeds 200, while at higher resolutions the GPU becomes the bottleneck.

Measured FPS Breakdown

At 1920x1080 resolution, the combo shows its highest performance ceiling. With Low settings, the average FPS reaches 218.2, which is a strong result for competitive play. Medium settings yield 168.1 FPS, High settings drop to 136.4 FPS, and Ultra settings bring the average down to 107.3 FPS. The progression from Low to Ultra shows a smooth degradation, with each settings tier costing roughly 30-40 FPS on average. This suggests that the CPU is capable of driving very high frame rates when the GPU is not overly burdened.

Moving to 2560x1440 resolution, the averages decrease as expected. Low settings produce 142.4 FPS, Medium settings deliver 110.2 FPS, High settings achieve 85.6 FPS, and Ultra settings yield 71.5 FPS. The gap between Low and Ultra at this resolution is 70.9 FPS, which is proportionally similar to the 1080p gap. This indicates that the GPU is becoming more of a factor, but the CPU still has enough headroom to maintain high framerates at Medium and High settings.

At 3840x2160 resolution, the performance drops significantly. Low settings average 76.8 FPS, Medium settings average 62 FPS, High settings average 50.3 FPS, and Ultra settings average 39.8 FPS. The Ultra result is below the 40 FPS threshold, which may be considered marginal for smooth gameplay in a fast-paced multiplayer setting. The data shows that 4K gaming with this combo requires settings compromises to maintain playable framerates, with Low settings being the only tier that comfortably exceeds 60 FPS. The measured FPS at 4K Ultra is 39.8, which is less than half of the 1080p Low result of 218.2, highlighting the GPU’s limitations at higher pixel counts.

GPU Role

The NVIDIA GeForce RTX 3070 is based on the Ampere architecture, using the GA104 chip fabricated on Samsung’s 8 nm process with 17,400 million transistors on a 392 mm² die. It has 5888 shading units, 184 texture mapping units, and 96 raster output units. The GPU operates at a base clock of 1500 MHz and a boost clock of 1725 MHz, with memory running at 1750 MHz (14 Gbps effective). The 8 GB GDDR6 memory on a 256-bit bus provides 448.0 GB/s of bandwidth, which is a significant factor in Fivem’s texture-heavy environments.

The GPU’s 72nd percentile ranking among all GPUs indicates it is a solid mid-to-high-end part, but it is not a top-tier performer. Its average benchmark score of 28238 is within 1% of several rivals, including the AMD Radeon RX 6600 XT (27985) and the NVIDIA GeForce GTX 980 Ti (27956). The RTX 3070’s 8 GB VRAM is adequate for Fivem at 1080p and 1440p, but at 4K with Ultra settings, the data shows the GPU becomes the primary bottleneck, with average FPS dropping to 39.8.

The GPU’s compute capabilities, as measured by PassMark GPU Compute score of 11195 and Geekbench OpenCL score of 123479, suggest it can handle the physics and particle effects present in Fivem’s multiplayer scenarios. The RTX 3070’s 46 ray tracing cores and 184 tensor cores are present, though Fivem’s typical usage of these features is minimal. The measured FPS data indicates that the GPU’s performance scales almost linearly with resolution when settings are held constant, with the 1080p Low result of 218.2 FPS being 2.8 times higher than the 4K Low result of 76.8 FPS. This scaling is typical for a GPU that is not bandwidth-limited at lower resolutions but becomes so as pixel count increases. The GPU’s 220 W TDP and dual-slot design are standard for this performance class, and the 8 GB VRAM is sufficient for Fivem’s current content at the tested settings, though future updates could push this limit.