Archeage

The AMD Ryzen 5 7600 paired with the AMD Radeon RX 6600 produces a clear performance hierarchy in Archeage, with resolution scaling revealing a system heavily influenced by GPU limits at higher resolutions. The data set for this combination shows a consistent pattern: as pixel count increases, frame rates drop significantly, but the relationship is not perfectly linear due to the varying demands of the game's settings presets.

Resolution Scaling

The measured frames per second (FPS) data demonstrates a steep decline when moving from 1920x1080 to 3840x2160. At the Low preset, the average FPS falls from 118 at 1080p to 79 at 1440p, a reduction of 39 FPS, and then further to 45 at 4K, a drop of 34 FPS from the 1440p figure. This pattern indicates that the RX 6600 is the primary limiting factor at higher resolutions, as the GPU's 8 GB of VRAM and 128-bit memory bus struggle to maintain throughput as the pixel workload expands.

The Medium preset shows similar scaling behavior. At 1080p, the average is 105 FPS, which decreases to 71 at 1440p and then to 40 at 4K. The percentage drop from 1080p to 4K is approximately 62%, which is slightly less severe than the Low preset's 62% decline, suggesting that the game's Medium settings introduce a mix of GPU and CPU overhead that slightly alters the bottleneck balance. The High preset reveals a different pattern: 71 FPS at 1080p, 48 at 1440p, and 27 at 4K. This represents a 62% reduction from 1080p to 4K as well, but the absolute values are lower across the board compared to Medium, indicating that High settings impose additional rendering costs that the RX 6600 cannot offset.

Ultra settings produce the most dramatic scaling curve. The average FPS at 1080p is 49, which falls to 33 at 1440p and then plummets to 19 at 4K. The drop from 1440p to 4K is a 42% reduction, while the 1080p to 4K decline is 61%. This suggests that at Ultra, the GPU is severely overtaxed even at 1080p, and the additional resolution scaling pushes the system into a territory where playability is marginal. The data indicates that at 4K, no preset achieves a playable average above 45 FPS, and the High and Ultra presets fall below 30 FPS, which would likely result in noticeable stuttering in an MMORPG environment with many players on screen.

GPU Role

The AMD Radeon RX 6600 is built on the RDNA 2.0 architecture with a Navi 23 chip on a 7 nm process. Its 8 GB of GDDR6 memory operates across a 128-bit bus, providing a bandwidth of 224.0 GB/s. The GPU's base clock is 1626 MHz, with a game clock of 2044 MHz and a boost clock of 2491 MHz. These specifications frame the GPU's performance ceiling, and the measured FPS data shows how that ceiling constrains Archeage.

At 1080p, the RX 6600 delivers 118 FPS on Low, 105 FPS on Medium, and 71 FPS on High. These numbers indicate that the GPU has sufficient headroom at lower settings to push high frame rates, but the gap between Low and High (47 FPS) shows that the game's visual effects scale heavily with GPU load. The VRAM capacity of 8 GB appears adequate for 1080p and 1440p, as the frame rates do not collapse due to memory swapping, but the 4K results suggest that the combination of higher resolution textures and larger render targets may be approaching the memory limit, particularly at High and Ultra presets.

The GPU's performance relative to its peers is modest. Its percentileVsAllGpus is 63, and its average benchmark score is 19036. The nearest rivals include the NVIDIA Quadro K6000 with a deltaPct of 0, meaning the RX 6600 performs identically to that older professional card in aggregate benchmarks. The NVIDIA GeForce RTX 4050 Mobile is 0.1% faster, and the NVIDIA Tesla K20m is 0.3% faster, while the NVIDIA RTX 2000 Ada Generation is 0.4% slower. This positioning shows that the RX 6600 is a mid-range card that competes with older high-end and newer mobile parts, which aligns with the measured FPS in Archeage being playable at 1080p but struggling at 4K.

The GPU's clock behavior is notable in the context of the game. With a boost clock of 2491 MHz, the card can reach high frequencies under load, but the 4K Ultra result of 19 FPS suggests that the rendering pipeline becomes saturated, leading to low utilization and frame rates. The GPU's 1792 shading units and 64 ROPs are likely the limiting factors at higher resolutions, as the pixel fill rate of 159.4 GPixel/s and texture rate of 279.0 GTexel/s are insufficient for the demands of Archeage at 4K with High or Ultra settings.

CPU Role

The AMD Ryzen 5 7600 is a 6-core, 12-thread processor from the 7000 series, based on the Zen 4 architecture with a Raphael codename on a 5 nm process. Its base clock is 3.80 GHz, boosting to 5.10 GHz, and it features 32 MB of shared L3 cache. The CPU's benchmark results show strong single-threaded and multi-threaded performance: a Cinebench R23 single-core score of 1852 and multi-core score of 12735, along with a Geekbench single-core score of 2521 and multi-core score of 13413.

In Archeage, the CPU's role is evident when examining the FPS at 1080p with different settings. The Low preset achieves 118 FPS, while Medium reaches 105 FPS and High 71 FPS. The delta between Low and Medium is just 13 FPS, which is relatively small, suggesting that the CPU can handle the increased draw calls and physics computations associated with Medium settings without major frame loss. However, the jump from Medium to High costs 34 FPS, indicating that High settings likely introduce more complex shader work that taxes both the CPU and GPU, but the CPU's 6 cores may become a limiting factor for certain game logic threads.

The CPU's percentileVsAllCpus is 78, and its average benchmark score is 26324. Its nearest rivals include the AMD Ryzen 9 6900HX with a deltaPct of 0.2% faster, the AMD Ryzen 7 7435HS at 0.3% slower, the Intel Core i9-11900KF at 0.4% faster, and the AMD Ryzen 5 8540U at 0.5% faster. This tight grouping means the Ryzen 5 7600 is essentially on par with these competing parts, which is relevant for Archeage because the game is known to be CPU-sensitive in crowded areas.

The CPU's 12 threads and 5.10 GHz boost clock provide solid headroom for the game's single-threaded performance. The PassMark single-thread score of 3910 and 3DMark single-thread score of 999 indicate that the core performance is adequate to drive the GPU at 1080p, as evidenced by the 118 FPS Low result. At 1440p, the CPU's influence diminishes, as the GPU becomes more of a bottleneck, but the 4K results show that even with a strong CPU, the RX 6600 cannot maintain high frame rates, confirming that the GPU is the primary constraint at higher resolutions.

FAQ

Q: What is the best resolution for this combo in Archeage?

A: The measured data shows that 1920x1080 is the only resolution where the average FPS exceeds 100 on any preset, with Low achieving 118 FPS and Medium achieving 105 FPS. At 2560x1440, the maximum average is 79 FPS on Low, while 3840x2160 tops out at 45 FPS on Low.

Q: How does the Ultra preset perform at 1080p?

A: At 1920x1080 with Ultra settings, the average FPS is 49. This is below the 60 FPS threshold typically considered smooth, and it is significantly lower than the Medium preset's 105 FPS, representing a 56 FPS difference.

Q: Is the CPU or GPU more limiting for this game?

A: The data indicates that at 1080p, the CPU and GPU are balanced, as the gap between Low and Medium is only 13 FPS. However, at 1440p and 4K, the GPU becomes the clear bottleneck, as the FPS drops sharply across all presets, with the 4K Ultra result of 19 FPS highlighting the GPU's limitations.

Q: What is the frame rate range for the Medium preset?

A: The Medium preset has complete min and max data. At 1080p, the range is 89 to 121 FPS with an average of 105. At 1440p, the range is 60 to 81 FPS with an average of 71. At 4K, the range is 34 to 46 FPS with an average of 40.

Q: How does this combo rank among all tested combos in Archeage?

A: The comboRankInGame is 2887 out of 3708 combos, placing it in the lower 22% of all tested configurations. This ranking reflects the RX 6600's mid-range GPU performance relative to the full spectrum of hardware tested.

Q: Can this system handle 4K at any playable frame rate?

A: The only 4K preset with an average above 40 FPS is Low, at 45 FPS. Medium averages 40 FPS, while High averages 27 FPS and Ultra averages 19 FPS. For a playable experience, Low at 4K is borderline, but Medium may be acceptable for less demanding scenes.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and the user's preference for frame rate versus visual quality. At 1920x1080, the Medium preset offers the best balance, delivering an average of 105 FPS with a range of 89 to 121 FPS. This provides smooth gameplay while maintaining higher visual fidelity than Low. The High preset at 71 FPS is also viable for users who prioritize visual quality, but the 34 FPS drop from Medium is substantial, and the resulting frame rate may dip below 60 FPS in demanding scenes.

For 2560x1440, the Low preset at 79 FPS is the only option that consistently exceeds 60 FPS. The Medium preset at 71 FPS is close, but its minimum FPS of 60 suggests it can dip to that level, which may be acceptable. High at 48 FPS and Ultra at 33 FPS are not recommended for smooth gameplay, as they fall below the 60 FPS threshold and may introduce noticeable stutter.

At 3840x2160, no preset achieves a consistently smooth experience. Low at 45 FPS is the highest average, but it still falls short of 60 FPS. Medium at 40 FPS is playable but requires a tolerance for lower frame rates. High and Ultra at 27 and 19 FPS respectively are not recommended, as they would likely result in a poor experience in an MMORPG with dynamic player populations.

The data suggests that the best experience overall is at 1080p with Medium settings, as it provides high frame rates with a comfortable margin above 60 FPS. For users willing to accept lower visual quality, the Low preset at 118 FPS offers the highest frame rate and is ideal for competitive play or high-refresh-rate displays. The Ultra preset is not viable at any resolution, as even at 1080p it only reaches 49 FPS, which is below the smoothness threshold.

Measured FPS Breakdown

The complete measured FPS data for this combo is as follows. At 3840x2160, the Low preset averages 45 FPS, Medium averages 40 FPS with a range of 34 to 46 FPS, High averages 27 FPS, and Ultra averages 19 FPS. At 2560x1440, Low averages 79 FPS, Medium averages 71 FPS with a range of 60 to 81 FPS, High averages 48 FPS, and Ultra averages 33 FPS. At 1920x1080, Low averages 118 FPS, Medium averages 105 FPS with a range of 89 to 121 FPS, High averages 71 FPS, and Ultra averages 49 FPS.

The Medium preset is the only one with complete min and max data across all resolutions, providing insight into frame time consistency. At 1080p, the spread between min and max is 32 FPS, indicating some variance but generally stable performance. At 1440p, the spread narrows to 21 FPS, while at 4K it is 12 FPS, showing that frame pacing becomes more consistent as the GPU becomes more saturated, albeit at lower frame rates.

The scaling from 1080p to 1440p averages a 32% FPS reduction across all presets, while the scaling from 1440p to 4K averages a 43% reduction. This non-linear scaling suggests that the RX 6600's memory bandwidth of 224.0 GB/s becomes increasingly insufficient as resolution increases, particularly for the High and Ultra presets that likely use higher-resolution textures and more complex shading.

How This Combo Ranks

The AMD Ryzen 5 7600 and AMD Radeon RX 6600 combination ranks 2887 out of 3708 tested combos in Archeage, placing it in the 22nd percentile of all configurations. This ranking is consistent with the hardware's individual positions: the CPU ranks in the 78th percentile among all CPUs, while the GPU ranks in the 63rd percentile among all GPUs. The lower GPU percentile relative to the CPU percentile explains why the combo's overall rank is dragged down, as the RX 6600 holds back the stronger Ryzen 5 7600.

The CPU's nearest rivals, including the AMD Ryzen 9 6900HX, AMD Ryzen 7 7435HS, Intel Core i9-11900KF, and AMD Ryzen 5 8540U, all have average scores within 0.5% of the Ryzen 5 7600. This indicates that the CPU is not a differentiator in this combo, and any of these CPUs would likely produce similar FPS results when paired with the RX 6600. The GPU's nearest rivals show a similar pattern, with the NVIDIA Quadro K6000, GeForce RTX 4050 Mobile, Tesla K20m, and RTX 2000 Ada Generation all within 0.4% of the RX 6600's average score, confirming that the GPU's performance is firmly mid-range.

The combo rank of 2887 suggests that this system is positioned for 1080p gaming, where the measured FPS data shows it can handle Medium settings at over 100 FPS and High settings at 71 FPS. The ranking also indicates that for 1440p, users would need to lower settings to Low or Medium to maintain playable frame rates, while 4K is only viable at Low settings with a 45 FPS average. This combination is not competitive with higher-end GPUs in the database, but it offers a functional experience for MMORPG players who prioritize frame rate over maximum visual fidelity.