Archeage

The measured data for Archeage pairs an AMD Ryzen 5 7600 (6 cores / 12 threads, Zen 4, 3.80 GHz base / 5.10 GHz boost) with an NVIDIA GeForce RTX 3060 Ti (Ampere, 8 GB GDDR6, 448.0 GB/s bandwidth). The fact pack contains 12 average-FPS rows across three resolutions and four settings presets, with no minimum or maximum FPS recorded. These results describe a system that handles Archeage comfortably at 1080p and 1440p on several presets, while 4K requires more careful settings selection.

Settings Recommendations

The best preset depends on the target resolution, and the measured rows give three clear starting points.

At 1920x1080, High is the strongest measured balance. It averages 95 fps, leaving a comfortable margin above 60 fps, while Ultra still averages 63.8 fps but is roughly 32.8% slower than High. Medium is much faster at 143.4 fps, but the jump from Medium to High costs 48.4 fps while staying far above 60. Low is the highest measured preset at 158.6 fps, but it is only 15.2 fps above Medium, so the visual quality trade-off is unlikely to be worth the difference. High is therefore the recommended 1080p preset: it provides a large speed buffer and sits one step below the expensive Ultra preset.

At 2560x1440, the choice narrows. High averages 66.6 fps, which clears the 60 fps line. Medium averages 93.9 fps and Low averages 110 fps. Ultra drops to 43.6 fps, which is not smooth enough for a consistent 60 fps target. For users who want the best image quality at 1440p, High is the highest preset that stays above 60 fps. For users who value headroom more than the extra detail in High, Medium is the safer measured option because it adds 27.3 fps over High.

At 3840x2160, no preset reaches 60 fps. Low averages 59 fps, Medium averages 56 fps, High averages 38.8 fps, and Ultra averages 25.2 fps. Medium is the best compromise in the measured data: it is only 3 fps slower than Low, while High is 17.2 fps slower than Medium. Since Low and Medium are close in raw average FPS, choosing Medium appears to preserve a similar frame rate while raising settings one step.

FAQ

Q: What average FPS does this combo deliver at 1080p Ultra in Archeage?

A: The measured average is 63.8 fps. High is significantly faster at 95 fps, while Medium is 143.4 fps and Low is 158.6 fps.

Q: Can this system hold 60 fps at 1440p?

A: Yes, on three presets. Low averages 110 fps, Medium averages 93.9 fps, and High averages 66.6 fps. Ultra does not hold 60 fps, averaging 43.6 fps.

Q: Is 4K playable with this combo?

A: It is close on the lowest presets. Low averages 59 fps and Medium averages 56 fps. High and Ultra are further behind at 38.8 fps and 25.2 fps, making them weaker choices for a 4K experience.

Q: How does this combo rank among tested Archeage combos?

A: It ranks 883 out of 1727 measured combos. That means 882 combos place above it and 844 place below it, putting it slightly below the midpoint of the tested field.

Q: What are the closest rivals for the CPU and GPU in their general benchmark lists?

A: The Ryzen 5 7600 has an average benchmark score of 26617, with nearest rivals including the AMD Ryzen 7 5800X3D at 26574 and the Intel Core i9-12900HK at 26672. The RTX 3060 Ti has an average benchmark score of 25120, with nearest rivals including the AMD Radeon RX 6700M at 25180 and the AMD Radeon RX 6600 at 25235.

Q: Are minimum or maximum FPS values available?

A: No. The fact pack only contains average FPS values; the minFps and maxFps fields are null for every measured row.

Resolution Scaling

The FPS drop from 1080p to 4K is large and consistent across presets. At High settings, the average goes from 95 fps at 1080p to 66.6 fps at 1440p and then 38.8 fps at 4K. That is a 29.9% drop from 1080p to 1440p and a 41.7% drop from 1440p to 4K. At Low settings, the numbers are 158.6, 110, and 59 fps; the drop from 1080p to 1440p is 30.6%, while the drop from 1440p to 4K is 46.4%. The pattern is similar on Medium and Ultra: Medium falls from 143.4 to 93.9 to 56 fps, and Ultra falls from 63.8 to 43.6 to 25.2 fps.

This scaling pattern points to the GPU as the limiting component as resolution rises. Even Low settings lose a large share of performance when moving to 4K, which suggests the pixel-count increase itself is the dominant load. The RTX 3060 Ti’s 8 GB GDDR6 frame buffer and 448.0 GB/s memory bandwidth are fixed resources that these resolution steps place under different pressure. The CPU’s role is more visible at 1080p, where the highest measured value in the entire data set is Low at 158.6 fps. By 4K, the GPU cannot sustain that kind of frame rate on any preset, so the CPU’s headroom becomes less relevant to the final average FPS.

How This Combo Ranks

In Archeage, this CPU/GPU pairing is ranked 883 out of 1727 tested combos. That is below the exact middle of the field: 882 combos are faster and 844 are slower. The component-level percentiles are higher: the Ryzen 5 7600 sits in the 83rd percentile of all CPUs, and the RTX 3060 Ti sits in the 69th percentile of all GPUs. The in-game rank is therefore less flattering than the individual hardware percentiles. This gap suggests that Archeage’s measured combo pool includes many systems whose combined CPU and GPU performance places higher in this specific game.

The general benchmark scores reinforce the idea that this is a solid mid-pack pairing with a strong CPU. The CPU’s average benchmark score of 26617 is close to its nearest rivals, with deltaPct values ranging from -0.2 to 0.3. The GPU’s average benchmark score of 25120 is similarly close to its nearest rivals. These near-parity relationships mean the combo’s positioning in Archeage is determined more by the game’s measured FPS distribution than by any unusual strength or weakness in one component.

CPU Role

The Ryzen 5 7600 contributes a strong per-thread foundation. It has 6 cores and 12 threads on the Zen 4 Raphael architecture, with a base clock of 3.80 GHz and a boost clock of 5.10 GHz. Its L3 cache is 32 MB shared. In general benchmarks, the CPU reaches 3DMark single-thread 999, 2-thread 1938, 4-thread 3686, 8-thread 5508, 16-thread 6499, and max-thread 6503. The near-identical 16-thread and max-thread scores are expected for a 12-thread CPU; once the benchmark uses more threads than the CPU has, the score stops climbing. Cinebench R23 multi-core is 22992 and single-core is 3246, while PassMark multi-thread is 27058 and single-thread is 3910.

The thread-scaling pattern shows that the CPU gains strongly from the first few threads and still improves through 8 threads. The 2-thread score is nearly double the single-thread score, and the 4-thread score is nearly double the 2-thread score. The max-thread score is 6503, only 4 points above the 16-thread score, meaning the CPU is fully engaged by that point. For Archeage, the highest measured FPS in the data set is 158.6 at 1080p Low, which is the kind of result that depends on strong per-thread performance. At 1440p and 4K, the measured FPS falls even on Low settings, indicating that the GPU load takes over as the dominant constraint.

The CPU’s nearest rivals in general benchmarks are all close in average score. The AMD Ryzen 7 5800X3D scores 26574, the Intel Core i9-12900HK scores 26672, the AMD EPYC 8024P scores 26555, and the Intel Core i9-11900K scores 26546. The Ryzen 5 7600’s average of 26617 sits within 0.3% of all four. This reinforces that the CPU is not an outlier in either direction; it provides dependable multi-threaded throughput and high single-thread speed. In a 2014 MMORPG, that combination is enough to drive high averages at lower resolutions, but the measured data shows the frame rate still yields to resolution pressure as the GPU becomes the bottleneck.

Measured FPS Breakdown

The table below lists all measured average FPS values from the fact pack. No minimum or maximum values are present in the data.

| Resolution | Low | Medium | High | Ultra |

|---|---|---|---|---|

| 1920x1080 | 158.6 | 143.4 | 95 | 63.8 |

| 2560x1440 | 110 | 93.9 | 66.6 | 43.6 |

| 3840x2160 | 59 | 56 | 38.8 | 25.2 |

At every resolution, the order of presets is the same: Low is fastest, Medium is second, High is third, and Ultra is slowest. At 1080p, the gap between Low and Medium is 15.2 fps, while the gap between Medium and High is 48.4 fps. The Ultra preset still stays above 60 at 1080p with 63.8 fps. At 1440p, Low and Medium remain far above 60 at 110 and 93.9 fps, High just clears at 66.6 fps, and Ultra falls to 43.6 fps. At 4K, Low and Medium are nearly identical at 59 and 56 fps, while High and Ultra drop sharply to 38.8 and 25.2 fps.

These 12 values form a coherent picture: the RTX 3060 Ti has enough power for smooth 1080p and 1440p play on medium-to-high settings, and the Ryzen 5 7600 provides the single-thread speed to push very high frame rates when the GPU load is low. At 4K, the data shows a hard ceiling near 60 fps, with Medium being the only preset that combines a playable average with a settings level above Low.