Evolve

The AMD Ryzen 5 7600 and NVIDIA GeForce RTX 3070 combination delivers a performance profile in Evolve that is heavily dictated by resolution and graphics settings. The measured data reveals a system capable of high refresh rates at 1080p, but one that becomes progressively more GPU-bound as resolution increases, with the Ultra preset proving particularly demanding.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and consistent across all settings, clearly identifying the GPU as the primary scaling bottleneck. At Low settings, the average frame rate falls from 214.4 FPS at 1920x1080 to 147.9 FPS at 2560x1440, a reduction of 66.5 FPS. Pushing further to 3840x2160 yields 79.5 FPS, which is a 134.9 FPS drop from the 1080p baseline. This pattern indicates that while the CPU can feed frames at lower resolutions, the RTX 3070’s rendering workload expands rapidly with pixel count.

The scaling becomes even more pronounced at higher quality presets. At High settings, the transition from 1080p (130.3 FPS) to 1440p (85.7 FPS) costs 44.6 FPS, and the move to 4K (51.5 FPS) represents a 60.5% reduction from the 1080p figure. The Ultra preset shows the most severe scaling, with 88.7 FPS at 1080p dropping to 59.8 FPS at 1440p and finally to 33.3 FPS at 4K. The data suggests that at 4K Ultra, the combination is squarely limited by the GPU’s throughput, as the frame rate falls below the 60 FPS threshold for smooth gameplay.

The delta between Low and Ultra at each resolution also illustrates the GPU’s headroom. At 1080p, the spread is 125.7 FPS (214.4 vs 88.7), while at 4K the spread narrows to 46.2 FPS (79.5 vs 33.3). This compression at higher resolutions confirms that the RTX 3070’s compute units are saturated by the pixel fill rate and shading demands, leaving less relative performance difference between settings.

GPU Role

The NVIDIA GeForce RTX 3070, built on the Ampere architecture with an 8 nm process, brings 8 GB of GDDR6 memory on a 256-bit bus, delivering 448.0 GB/s of bandwidth. The memory clock runs at 1750 MHz, with an effective data rate of 14 Gbps. These specifications are critical for Evolve, a game that can stress memory capacity and bandwidth at higher resolutions and texture settings. The 8 GB frame buffer appears sufficient for the measured settings, as no minFps data was provided to indicate memory-related stuttering, but the bandwidth becomes a factor at 4K where the GPU must move more texture data per frame.

The GPU’s boost clock of 1725 MHz and base clock of 1500 MHz, combined with 5888 shading units, produce a peak FP32 throughput of 20.31 TFLOPS. This raw compute power explains the strong 1080p performance, where the card can maintain 130.3 FPS at High settings. However, the 165.6 GPixel/s pixel rate and 317.4 GTexel/s texture rate are the limiting factors at 4K Ultra, where the measured 33.3 FPS indicates the rasterization pipeline is overwhelmed. The RTX 3070’s overall benchmark results, including a Passmark G3D score of 22214, place it in the 72nd percentile of all GPUs, which aligns with its mid-to-high-tier positioning in this game’s results.

The GPU’s 220 W TDP and PCIe 4.0 x16 interface are consistent with a card that can sustain high clocks under load, but the data shows that Evolve’s Ultra preset demands more than the card can deliver at 4K. The gap between High (51.5 FPS) and Medium (64.7 FPS) at 4K suggests that the Ultra preset includes settings that disproportionately impact the GPU, likely related to shadow quality or post-processing effects.

Settings Recommendations

Based on the measured rows, the optimal balance of visual quality and frame rate is achieved at 2560x1440 with the High preset, yielding 85.7 FPS. This comfortably exceeds the 60 FPS threshold while maintaining a substantial visual upgrade over Medium. At 1080p, the High preset delivers 130.3 FPS, which is ideal for high-refresh-rate displays, while Medium at 166.9 FPS offers even more headroom for competitive play. The Ultra preset is only viable at 1080p, where 88.7 FPS is playable, but the 59.8 FPS at 1440p and 33.3 FPS at 4K make it unsuitable for those resolutions.

For 4K users, the Low preset at 79.5 FPS is the only measured option that provides a smooth experience, but the visual compromise is significant. Medium at 64.7 FPS is borderline, and High at 51.5 FPS falls short of the 60 FPS target. The data suggests that users with 4K displays should either accept Medium settings or reduce the resolution to 1440p to unlock the full range of presets. The 214.4 FPS result at 1080p Low indicates that this combination is heavily CPU-limited at that configuration, meaning competitive players could potentially push even higher frame rates with a more powerful GPU.

Measured FPS Breakdown

At 1920x1080, the frame rates are consistently high across all settings. The Low preset achieves 214.4 FPS, Medium drops to 166.9 FPS, High yields 130.3 FPS, and Ultra bottoms out at 88.7 FPS. The step from High to Ultra costs 41.6 FPS, which is the largest single-preset penalty at this resolution, suggesting that Ultra enables effects that heavily tax the GPU’s shading units. The 1080p results show that the Ryzen 5 7600 can keep up with the RTX 3070 even at very high frame rates, as the 214.4 FPS figure indicates no CPU bottleneck.

At 2560x1440, the pattern shifts. Low produces 147.9 FPS, Medium drops to 110.4 FPS, High yields 85.7 FPS, and Ultra falls to 59.8 FPS. The relative drop from Low to Medium is 37.5 FPS, while the drop from Medium to High is 24.7 FPS. The High to Ultra transition costs 25.9 FPS, which is a steeper decline than the previous step. This suggests that at 1440p, the GPU’s fill rate becomes a limiting factor for the Ultra preset, as the pixel count increases by 1.78x compared to 1080p.

At 3840x2160, the frame rates are markedly lower. Low achieves 79.5 FPS, Medium drops to 64.7 FPS, High yields 51.5 FPS, and Ultra falls to 33.3 FPS. The 4K results show a more linear scaling pattern, with each preset step costing roughly 14-15 FPS (Low to Medium: 14.8, Medium to High: 13.2, High to Ultra: 18.2). The 4K Ultra result of 33.3 FPS is the lowest measured figure and confirms that this combination cannot handle the game’s most demanding configuration at that resolution.

How This Combo Ranks

The AMD Ryzen 5 7600 + NVIDIA GeForce RTX 3070 combination ranks 796th out of 1695 tested combos in Evolve, placing it in the upper-middle tier of the database. This percentile position is consistent with the component-level benchmarks: the CPU sits in the 83rd percentile of all processors, while the GPU is in the 72nd percentile. The combo’s rank suggests that while the individual components are above-average, the pairing does not break into the top tier of results, likely due to the GPU’s limitations at higher resolutions.

The CPU’s nearest rivals provide context for the overall system performance. The Ryzen 5 7600 has an average benchmark score of 26617, which is within 0.2% of the AMD Ryzen 7 5800X3D (26574) and within 0.3% of the Intel Core i9-11900K (26546). The Intel Core i9-12900HK is 0.2% faster with a score of 26672. These tight margins indicate that the Ryzen 5 7600 is competitively positioned for gaming workloads, and the Evolve results reflect this balance. The GPU’s nearest rivals include the AMD Radeon RX 6600 XT (0.9% slower with a score of 27985) and the NVIDIA GeForce GTX 980 Ti (1% slower with a score of 27956), while the AMD FirePro S7150 is 0.6% faster (28409).

CPU Role

The AMD Ryzen 5 7600 provides 6 cores and 12 threads, based on the Zen 4 architecture fabricated on a 5 nm process at TSMC. Its base clock of 3.80 GHz and boost clock of 5.10 GHz, combined with 32 MB of shared L3 cache, deliver strong single-thread performance that is critical for Evolve’s game logic. The CPU’s benchmark results, including a Cinebench R23 single-core score of 3246 and a multi-core score of 22992, indicate robust performance across both lightly and heavily threaded workloads. The Passmark single-thread score of 3910 further confirms the CPU’s capability to handle the game’s main thread without becoming a bottleneck.

The measured FPS data supports this assessment. At 1080p Low, the 214.4 FPS result suggests the CPU is capable of feeding the GPU well beyond typical display refresh rates. Even at 1080p Ultra, the 88.7 FPS figure shows that the CPU maintains adequate headroom, as the GPU is clearly the limiting factor at that setting. The 3DMark single-thread score of 999 and 2-thread score of 1938 indicate that the CPU’s high clock speeds are effective for gaming, which relies heavily on single-core performance.

The CPU’s memory support for DDR5 with dual-channel configuration and 83.2 GB/s bandwidth provides ample data throughput for the game’s assets, complementing the GPU’s 448.0 GB/s bandwidth. The Ryzen 5 7600’s 65 W TDP and 5 nm process node contribute to efficient operation, allowing sustained boost clocks during extended gaming sessions. In Evolve, the CPU’s role is to maintain frame pacing and feed the GPU with draw calls, and the data shows that it does so effectively at 1080p and 1440p, with the GPU becoming the sole bottleneck as resolution and settings increase.