Archeage

# Archeage with AMD Ryzen 5 7600X + NVIDIA GeForce RTX 3070

The AMD Ryzen 5 7600X and NVIDIA GeForce RTX 3070 combination delivers a playable Archeage experience across most resolutions, but the data reveals a clear ceiling at 4K Ultra where the frame rate drops below 30 FPS. At 1080p, this pairing is exceptionally strong, with even the most demanding preset maintaining a smooth 68.4 FPS average. The measured results show a system that handles the game's engine well at mainstream resolutions, though pushing to 4K requires careful settings management to stay fluid.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent across all settings presets. At Low settings, the average frame rate falls from 176.7 FPS at 1080p to 115.3 FPS at 1440p, then down to 67 FPS at 4K. That represents a 62% reduction from 1080p to 4K, indicating the GPU becomes the primary bottleneck as pixel count rises. The RTX 3070's 8 GB GDDR6 memory and 448.0 GB/s bandwidth are sufficient for 1080p and 1440p, but the 4K Ultra result of 28 FPS suggests the memory capacity and bandwidth are stressed at that resolution.

Medium settings show a similar pattern: 155.2 FPS at 1080p, 104.3 FPS at 1440p, and 60.4 FPS at 4K. The scaling from 1440p to 4K is particularly harsh — a 42% drop — which points to the GPU's pixel throughput limits rather than CPU limitation. The Ryzen 5 7600X, with its 6 cores and 12 threads boosting to 5.30 GHz, is unlikely to be the constraint at 4K given its strong single-thread performance in synthetic benchmarks (3dmark single-thread score of 1060).

High settings follow the trend: 107.3 FPS at 1080p, 68.4 FPS at 1440p, and 38.6 FPS at 4K. The 1440p to 4K transition cuts performance nearly in half, reinforcing that the RTX 3070's 20.31 TFLOPS FP32 throughput is the limiting factor at higher resolutions. Ultra settings are the most demanding, with 68.4 FPS at 1080p dropping to 49.1 FPS at 1440p and 28 FPS at 4K. The data suggests that 4K Ultra is not viable for this combination, while 1440p Ultra sits right at the edge of acceptable playability.

Settings Recommendations

For 4K displays, the measured data makes a clear case for Medium settings. The 60.4 FPS average at 4K Medium is the only 4K preset that achieves a consistently smooth frame rate, whereas High drops to 38.6 FPS and Ultra falls to 28 FPS. Low at 4K delivers 67 FPS, but the visual quality trade-off is substantial for only a 11% gain over Medium. The practical choice for 4K is Medium, which balances the RTX 3070's capabilities with playable performance.

At 1440p, High settings at 68.4 FPS offer the best experience. Medium runs faster at 104.3 FPS, but the visual uplift from Medium to High is worth the 35 FPS cost given that 68.4 FPS remains above the 60 FPS threshold. Ultra at 1440p drops to 49.1 FPS, which is playable but not ideal for fast-moving MMORPG combat. Low at 115.3 FPS is unnecessary unless chasing maximum refresh rates on a 144 Hz monitor.

For 1080p, the choice depends on display refresh rate. Ultra at 68.4 FPS is fully playable and provides the best visuals. High at 107.3 FPS suits 100 Hz panels, while Medium at 155.2 FPS and Low at 176.7 FPS are for 144 Hz or 165 Hz displays. Given that Archeage is an MMORPG where visual clarity matters for reading the battlefield, High or Ultra at 1080p is the recommended balance.

GPU Role

The RTX 3070's specifications explain the measured results. With a boost clock of 1725 MHz and 5888 shading units, the GPU delivers 20.31 TFLOPS of FP32 compute, which is adequate for 1080p and 1440p but stressed at 4K. The 8 GB GDDR6 memory on a 256-bit bus provides 448.0 GB/s of bandwidth — enough for 1440p High, but the 4K Ultra result of 28 FPS suggests memory pressure at higher resolutions.

The GPU's 46 ray tracing cores and 184 tensor cores are present, but Archeage's measured results do not indicate ray tracing usage; the performance scaling across presets is consistent with traditional rasterization workloads. The 96 ROPs and 184 TMUs handle texture and pixel throughput well at 1080p, where even Ultra achieves 68.4 FPS. The pixel rate of 165.6 GPixel/s and texture rate of 317.4 GTexel/s are the likely reasons why 1440p Medium (104.3 FPS) and High (68.4 FPS) remain strong.

The 14 Gbps effective memory speed on GDDR6 is a contributing factor to the 4K Medium result of 60.4 FPS. This is the only 4K preset that stays above 60 FPS, indicating that the memory subsystem is sufficient for moderate settings but not for the heavier texture loads of High and Ultra. The GPU's PassMark G3D score of 22214 and percentile ranking of 72 versus all GPUs place it in the upper tier, but the 4K results show its limits.

How This Combo Ranks

In Archeage, this CPU-GPU combination ranks 788 out of 1727 tested combos, placing it in the 45th percentile of all pairings. This mid-pack ranking is notable given the individual component performance: the CPU sits in the 83rd percentile versus all CPUs, and the GPU in the 72nd percentile. The gap between component rankings and the combo's game-specific ranking suggests that Archeage's engine does not fully utilize the Ryzen 5 7600X's capabilities.

The CPU's nearest rivals — the AMD Ryzen 7 PRO 6850U (avg score 26262, delta 0%), Ryzen 7 7735U (26305, -0.1%), Ryzen 5 PRO 5655GE (26320, -0.2%), and Ryzen 7 5700X (26214, +0.2%) — all have nearly identical average benchmark scores, indicating the 7600X's performance is well-understood. The GPU's nearest rivals include the AMD Radeon RX 6600 XT (27985, +0.9%) and NVIDIA GeForce GTX 980 Ti (27956, +1%), showing the RTX 3070's average benchmark score of 28238 is competitive with these older or lower-tier cards.

The rank of 788 out of 1727 means roughly 54% of tested combinations outperform this pairing in Archeage. This is not a reflection of weak hardware, but rather the game's specific demands. MMORPGs often rely on single-thread CPU performance and moderate GPU loads; the 7600X's single-thread score of 3406 in Cinebench R23 is strong, yet the game's frame rates at 4K Ultra suggest GPU limitation dominates.

FAQ

Q: What is the best resolution for this CPU-GPU combo in Archeage?

A: The measured data shows 1440p High at 68.4 FPS as the sweet spot. 1080p Ultra also achieves 68.4 FPS, while 4K Medium manages 60.4 FPS. For a balance of visuals and smoothness, 1440p High is recommended.

Q: Is 4K playable with this combination?

A: Yes, but only at Medium settings, which produce a 60.4 FPS average. High drops to 38.6 FPS and Ultra to 28 FPS, both below the 60 FPS threshold for comfortable play.

Q: How does the RTX 3070 compare to its nearest rivals in this game?

A: The GPU's average benchmark score of 28238 is 0.9% ahead of the AMD Radeon RX 6600 XT (27985) and 1% ahead of the NVIDIA GeForce GTX 980 Ti (27956). It trails the AMD FirePro S7150 (28409) by 0.6%.

Q: Does the Ryzen 5 7600X bottleneck the RTX 3070 in Archeage?

A: The data indicates the GPU is the limiting factor at 4K, where frame rates drop by over 60% from 1080p. The CPU's strong single-thread performance (Cinebench R23 single-core score of 3406) suggests it is not the bottleneck at any resolution tested.

Q: What settings should I use for a 144 Hz monitor at 1080p?

A: Medium settings at 155.2 FPS or Low at 176.7 FPS will saturate a 144 Hz display. High at 107.3 FPS is also playable but leaves headroom unused. Ultra at 68.4 FPS is best for visual quality if you accept a lower frame rate.

Q: Is the 8 GB VRAM sufficient for Archeage?

A: The measured results show 8 GB GDDR6 is enough for 1080p Ultra (68.4 FPS) and 1440p High (68.4 FPS). At 4K, the 28 FPS Ultra result suggests VRAM capacity or bandwidth becomes a constraint, but Medium at 60.4 FPS remains viable.

Measured FPS Breakdown

At 1920x1080, the full settings range is playable. Low settings produce the highest average at 176.7 FPS, followed by Medium at 155.2 FPS, High at 107.3 FPS, and Ultra at 68.4 FPS. The scaling from Low to Ultra shows a 61% reduction in frame rate, which is typical for a GPU-bound scenario at this resolution.

At 2560x1440, Low averages 115.3 FPS, Medium 104.3 FPS, High 68.4 FPS, and Ultra 49.1 FPS. The drop from Medium to High is 35%, while High to Ultra is 28%. The 1440p results show the RTX 3070 handling moderate settings comfortably, but Ultra falls below the 60 FPS threshold.

At 3840x2160, Low averages 67 FPS, Medium 60.4 FPS, High 38.6 FPS, and Ultra 28 FPS. This is the only resolution where no preset exceeds 70 FPS. The difference between Low and Medium is 9.8%, suggesting diminishing returns from lowering settings further. High and Ultra both fall well below playable thresholds, making Medium the only recommended 4K preset.

The data shows a consistent pattern: the RTX 3070 is a 1080p and 1440p card for Archeage, with 4K requiring settings compromises. The 788th rank out of 1727 combos reflects this mid-range positioning, though the combination remains well-suited for mainstream gaming at standard resolutions.