The Technomancer

The AMD Ryzen 5 5600GT and AMD Radeon RX 6600 combination delivers a playable but demanding experience in The Technomancer, with performance scaling that clearly identifies the GPU as the primary bottleneck at higher resolutions. The measured data shows a wide spread of frame rates across the three tested resolutions and four quality presets, ranging from a high of 132.2 FPS at 1080p Low to a low of 25.7 FPS at 4K Ultra. This pairing ranks 1325 out of 1656 tested combinations in this title, placing it in the lower third of the database for this specific game, though the measured results show it remains viable for 1080p and 1440p gaming.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and consistent across all settings, revealing a system that is heavily constrained by pixel throughput. At High settings, the average FPS falls from 88.8 at 1080p to 57.4 at 1440p, a reduction of 31.4 frames, and then further to 32.8 at 4K, representing a 63% loss from the 1080p baseline. This pattern intensifies at the lower presets: at Low settings, the 1080p average of 132.2 FPS drops to 82.6 at 1440p and then to 43.6 at 4K, meaning the 4K result is roughly one-third of the 1080p figure. The scaling curve indicates that the Radeon RX 6600’s 8 GB frame buffer and 128-bit memory interface become the limiting factor as resolution increases, with the GPU’s 224.0 GB/s bandwidth struggling to feed the larger frames.

The delta between 1440p and 4K is particularly telling. At Medium settings, the transition from 67.1 FPS at 1440p to 35.2 FPS at 4K cuts performance nearly in half, a 31.9 FPS drop that outpaces the 34.9 FPS drop seen when moving from 1080p to 1440p. This non-linear degradation suggests the RX 6600 hits a hard ceiling at 4K, where the 159.4 GPixel/s pixel rate is insufficient for sustained high-quality rendering. The Ultra preset tells the same story, with 42.2 FPS at 1440p collapsing to 25.7 FPS at 4K, a performance level that falls below the 30 FPS threshold often considered the minimum for playable action games. The data shows that 4K is only marginally viable at Low settings, where the 43.6 FPS average remains above 40 FPS but still trails the 1080p High result by 45.2 FPS.

GPU Role

The AMD Radeon RX 6600 sits at the 69th percentile among all GPUs in the database, with an average benchmark score of 25235, placing it in a competitive position relative to its immediate rivals. The nearest rival data shows the RX 6600 is essentially tied with the AMD Radeon 890M, which scores 25246 with a deltaPct of 0, and the AMD Radeon RX 6700M, which scores 25180 with a deltaPct of 0.2. It also runs within 0.5% of the NVIDIA GeForce RTX 3060 Ti, which scores 25120, and within 0.2% of the AMD Radeon RX 580 2048SP, which scores 25287. These near-identical scores indicate that the RX 6600’s 1792 shading units, 112 texture mapping units, and 64 ROPs deliver performance typical of this class, though the 132 W TDP and 8 GB GDDR6 memory are modest for 4K workloads.

The GPU’s clock behavior directly influences the measured FPS in The Technomancer. With a base clock of 1626 MHz, a game clock of 2044 MHz, and a boost clock of 2491 MHz, the RX 6600 can scale its frequency under load, but the 4K results suggest the memory subsystem becomes the limiting factor rather than raw compute. The 14 Gbps effective memory speed across a 128-bit bus yields 224.0 GB/s, which is adequate for 1080p and 1440p but insufficient for 4K Ultra, where the 25.7 FPS average indicates the GPU is starved for data. The DirectX 12 benchmark score of 51 on Passmark reinforces this, showing that modern API workloads stress the architecture more than older DirectX 11 titles, where the score of 152 is notably higher.

FAQ

Q: What is the best resolution for this CPU-GPU combo in The Technomancer?

A: The measured data shows 1080p is the strongest resolution, with all four presets exceeding 67 FPS, while 1440p remains playable at Medium (67.1 FPS) and High (57.4 FPS) but drops to 42.2 FPS at Ultra. 4K only exceeds 30 FPS at Low (43.6 FPS) and Medium (35.2 FPS) settings.

Q: How much performance is lost when moving from 1080p to 1440p at High settings?

A: The average FPS falls from 88.8 at 1080p to 57.4 at 1440p, a drop of 31.4 frames, representing a 35% reduction in frame rate. This is a significant but acceptable trade-off for higher resolution.

Q: Does this GPU handle Ultra settings in The Technomancer?

A: At 1080p Ultra, the RX 6600 produces 67.5 FPS, which is smooth, but at 1440p Ultra it falls to 42.2 FPS, and at 4K Ultra it drops to 25.7 FPS, which is below playable thresholds. Ultra settings are only recommended for 1080p.

Q: How does the RX 6600 compare to its closest GPU rival in overall benchmarks?

A: The RX 6600 has an average benchmark score of 25235, which is identical to the AMD Radeon 890M (25246, deltaPct 0) and within 0.2% of the AMD Radeon RX 6700M (25180, deltaPct 0.2). It is also 0.5% faster than the NVIDIA GeForce RTX 3060 Ti (25120, deltaPct 0.5).

Q: Is 4K gaming viable with this hardware in this game?

A: Only at the lowest settings. The 4K Low preset averages 43.6 FPS, and 4K Medium averages 35.2 FPS, but High (32.8 FPS) and Ultra (25.7 FPS) fall below 33 FPS. Users seeking 4K should stick to Low or Medium presets.

Q: What is the frame rate difference between Low and Ultra at 1440p?

A: The Low preset averages 82.6 FPS, while Ultra averages 42.2 FPS, a difference of 40.4 FPS. This shows Ultra settings nearly halve the frame rate at this resolution.

Measured FPS Breakdown

At 1920x1080, the full range of settings provides smooth gameplay. The Low preset reaches 132.2 FPS, Medium drops to 102 FPS, High settles at 88.8 FPS, and Ultra maintains 67.5 FPS. The spread between Low and Ultra is 64.7 FPS, indicating that even the most demanding preset remains well above 60 FPS, making 1080p the only resolution where all options are viable without compromise.

Moving to 2560x1440, the performance gap widens. Low averages 82.6 FPS, which is still excellent, while Medium delivers 67.1 FPS and High offers 57.4 FPS, both acceptable for action RPGs. Ultra, however, drops to 42.2 FPS, which may feel less responsive during combat sequences. The delta between Low and Ultra here is 40.4 FPS, showing that preset selection becomes more critical at this resolution.

At 3840x2160, the RX 6600 struggles to maintain playable frame rates. Low averages 43.6 FPS, Medium 35.2 FPS, High 32.8 FPS, and Ultra 25.7 FPS. The difference between Low and Ultra is 17.9 FPS, a smaller absolute gap than at lower resolutions, because the GPU is uniformly constrained. Only Low and Medium clear the 30 FPS mark, and even those results carry visual compromises.

CPU Role

The AMD Ryzen 5 5600GT, with 6 cores and 12 threads based on the Zen 3 Cezanne architecture, provides ample processing power for The Technomancer. Its benchmark results show a strong multi-threaded showing: a Cinebench R23 multicore score of 17272 and a Geekbench multicore score of 7986, placing it at the 78th percentile among all CPUs. The single-thread performance is equally solid, with a Cinebench R23 single-core score of 2438 and a Passmark single-thread score of 3348, ensuring the game’s primary thread is not a bottleneck.

Compared to its nearest rivals, the 5600GT is statistically identical in average benchmark score. It scores 20740, which matches the Intel Core i7-10700 (20746, deltaPct 0) and the AMD Ryzen 5 5600X (20680, deltaPct 0.3). It also sits within 0.3% of the Intel Core i5-12490F (20794, deltaPct -0.3) and within 0.5% of the AMD EPYC 7J13 (20845, deltaPct -0.5). This parity means that in The Technomancer, the CPU is unlikely to be the limiting factor at any resolution; the measured FPS drops from 1080p to 4K are far too steep to be explained by CPU performance. The 16 MB L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth are sufficient for the game’s data streaming needs, and the 3.60 GHz base clock with 4.60 GHz boost clock provides responsive frame pacing.

Settings Recommendations

Based on the measured rows, the optimal experience for this combination depends on the target resolution. At 1080p, the High preset (88.8 FPS) offers the best balance of visual fidelity and performance, as it remains far above 60 FPS while improving on the Medium preset’s 102 FPS and the Low preset’s 132.2 FPS. Ultra at 67.5 FPS is also acceptable, but the 21.3 FPS gain from dropping to High is substantial and likely warrants the visual trade-off for smoother gameplay.

For 1440p users, the Medium preset is the strongest recommendation, averaging 67.1 FPS, which sits comfortably above the 60 FPS threshold. The High preset at 57.4 FPS is still playable but approaches the boundary where frame drops become noticeable, while Low at 82.6 FPS sacrifices too much visual quality for a marginal improvement over Medium. Ultra at 42.2 FPS should be avoided, as the data shows it provides less than two-thirds of the Medium preset’s frame rate.

At 4K, only the Low preset (43.6 FPS) provides a consistently playable experience, with Medium (35.2 FPS) being borderline. High (32.8 FPS) and Ultra (25.7 FPS) fall below the 33 FPS mark and are not recommended for action gameplay. Users who prioritize resolution over fidelity should select Low, while those who can tolerate occasional stutters may opt for Medium. The data clearly indicates that the RX 6600 is best utilized at 1080p High or 1440p Medium for this title, as these presets maximize frame rate without exceeding the GPU’s memory and bandwidth capabilities.