The Technomancer

The Technomancer, a 2016 Action RPG, presents a demanding workload for modern hardware. This analysis examines the performance pairing of the AMD Ryzen 5 5600G processor with the NVIDIA GeForce RTX 5060 graphics card. Benchmark data for this combination is measured, not estimated, providing concrete performance figures for analysis. The results show a configuration that is substantial, but the balance between CPU and GPU shifts significantly depending on resolution and graphics settings. The data indicates this pairing is capable of high refresh rate gameplay at 1080p but becomes increasingly GPU-limited as resolution increases to 4K.

CPU Role

The AMD Ryzen 5 5600G is a 6-core, 12-thread processor based on the Zen 3 architecture, built on TSMC's 7 nm process. It operates with a base clock of 3.90 GHz and a boost clock of 4.40 GHz. This configuration is a solid foundation for gaming, and its benchmark scores place it in the 74th percentile of all CPUs tested. Its average benchmark score is 21088, placing it in direct competition with mobile and low-power parts like the Intel Core i3-1220P, which scores 21066, and the AMD Ryzen 5 7530U, which scores 21133. The performance delta between these parts is minimal, with the Ryzen 5 5600G holding a 0.1% advantage over the Intel chip and a 0.2% deficit against the AMD mobile part.

In this specific game, The Technomancer, the CPU's role is most evident at lower resolutions. At 1080p with Low settings, the system achieves an average of 268 FPS. This high frame rate at the lowest settings suggests the CPU is capable of feeding frames to the GPU without becoming a bottleneck. However, the data does not provide specific CPU load percentages, so this is an inference from the frame rate scaling. The processor's 16 MB of L3 cache and dual-channel DDR4 memory support with 51.2 GB/s of bandwidth are standard for its generation and are sufficient for the game's data streaming demands.

The single-threaded performance is a key factor for older game engines like the one powering The Technomancer. The Ryzen 5 5600G's single-core score of 1409 in Cinebench R23 and 1801 in Geekbench indicates a strong showing for its class. This is important because many games from this era rely heavily on one or two primary threads for game logic and rendering commands. The 3DMark single-thread score of 872 further confirms this capability. The data suggests that the CPU is not the primary limiting factor in most scenarios, especially when compared to the GPU's performance scaling.

GPU Role

The NVIDIA GeForce RTX 5060 is the dominant force in this pairing, built on the Blackwell 2.0 architecture. It features 8 GB of GDDR7 memory on a 128-bit bus, providing 448.0 GB/s of bandwidth. The GPU's base clock is 2280 MHz with a boost clock of 2497 MHz. Its compute capabilities are substantial, with 3840 shading units and a peak FP32 performance of 19.18 TFLOPS. The GPU's average benchmark score is 26331, placing it in the 72nd percentile of all GPUs. Its nearest rivals in the database include the AMD Radeon 860M (scoring 26401) and the AMD Radeon RX 6750 XT (scoring 26011). The RTX 5060 trails the 860M by 0.3% but leads the RX 6750 XT by 1.2%.

The GPU's performance is the primary driver of frame rates in The Technomancer. The data shows a clear and consistent relationship between graphics settings and average FPS. At 1080p, the average frame rate scales from 268 FPS on Low down to 116 FPS on Ultra. This 152 FPS spread highlights the significant workload placed on the GPU by the game's visual effects. The 8 GB VRAM capacity is a critical factor at higher resolutions and settings. While the game is from 2016, the data does not specify VRAM usage, but the performance drop from Medium to Ultra at 4K (80 FPS to 49 FPS) suggests that the Ultra preset is extremely demanding on the graphics pipeline.

The GPU's memory bandwidth of 448.0 GB/s is likely a key reason why the RTX 5060 can maintain high frame rates. The Technomancer features detailed environments and character models, which can benefit from high bandwidth texture streaming. The RTX 5060's pixel rate of 119.9 GPixel/s and texture rate of 299.6 GTexel/s provide the raw throughput needed to handle the game's rendering load. The performance at 4K High (60 FPS average) shows that the GPU is capable of playable frame rates at the highest resolution, but the headroom is limited.

Settings Recommendations

The measured FPS data provides a clear picture of which settings yield the best experience. For players targeting the highest possible frame rates, typically on 1080p monitors with high refresh rates, the Low preset at 1920x1080 delivers an average of 268 FPS. This is an excellent choice for competitive play or for those who prioritize smoothness above all else. The jump from Low to Medium at 1080p is substantial, with the average dropping from 268 FPS to 189 FPS. This 79 FPS reduction is significant, but the Medium preset still offers a very high frame rate and likely provides a more visually pleasing experience.

For a balanced experience that maintains high frame rates while improving visual fidelity, the Medium preset is the recommended starting point. At 1080p, it delivers an average of 189 FPS, which is still well above the 144 Hz refresh rate common on modern monitors. At 1440p, the Medium preset averages 132 FPS, which is a solid result for high-refresh-rate 1440p gaming. The High preset at 1440p also performs admirably, with an average of 99 FPS, making it a viable option for those with G-Sync or FreeSync displays. The data shows that the High preset at 2560x1440 is a sweet spot, offering a significant visual upgrade over Medium with only a 33 FPS average loss (132 to 99 FPS).

At 4K, the choice is more constrained. The Ultra preset at 3840x2160 averages 49 FPS, which is playable but may not feel smooth on all displays. The High preset at this resolution is a better option, averaging 60 FPS. This is a critical threshold for many players, and the High preset is the only one that consistently hits it at 4K. The Medium preset at 4K averages 80 FPS, which is excellent for this resolution and provides a better experience than High. However, the visual difference between Medium and High can be noticeable in a game like The Technomancer. The data suggests that for 4K, the High preset is the best balance of visual quality and performance, with Medium being a strong alternative for those who prefer higher frame rates.

How This Combo Ranks

In the database of tested combinations for The Technomancer, this pairing of the AMD Ryzen 5 5600G and NVIDIA GeForce RTX 5060 ranks 635th out of 3696 tested combos. This places the configuration in the top 17% of all tested systems, indicating a strong overall performance level. This rank is a holistic measure of the system's capability in this specific game. The high rank is likely driven by the GPU's strong performance, as the CPU, while competent, is not the fastest in the database.

The percentile rank for the GPU is 72%, which aligns with its average benchmark score. This suggests that the RTX 5060 is a high-performing part on its own. The CPU's percentile rank is 74%, which is also above average. When combined, these two parts create a system that is more powerful than a majority of the tested configurations. The rank of 635 out of 3696 is a strong endorsement of this pairing for playing The Technomancer, suggesting that users can expect a smooth experience at most settings and resolutions. The data does not specify what the top-ranked combos are, but the position within the top 20% is a clear signal of capable performance.

Resolution Scaling

The FPS data across resolutions reveals the classic scaling behavior of a system that becomes increasingly GPU-bound at higher resolutions. At 1080p Low, the system achieves 268 FPS. When moving to 1440p Low, the frame rate drops to 187 FPS, a reduction of approximately 30%. Moving from 1440p to 4K Low, the frame rate drops from 187 FPS to 113 FPS, a further reduction of approximately 40%. This consistent and significant drop with each resolution increase is a strong indicator that the GPU is the limiting component.

The scaling is even more pronounced at higher settings. At Ultra settings, the frame rate drops from 116 FPS at 1080p to 81 FPS at 1440p (a 30% reduction) and then to 49 FPS at 4K (a further 40% reduction). This pattern demonstrates that the GPU's rendering load is scaling almost linearly with the number of pixels. The CPU's performance is not showing a similar bottleneck, as the frame rates are not plateauing at lower resolutions. If the CPU were the limiting factor, we would expect to see similar frame rates at 1080p and 1440p, but the data clearly shows a strong dependence on resolution.

The difference between 1080p and 4K at the same settings is substantial. For example, at High settings, the average FPS drops from 142 at 1080p to 99 at 1440p and finally to 60 at 4K. This represents a 58% reduction in frame rate from 1080p to 4K. This data strongly suggests that the RTX 5060 is the primary driver of frame rates in this game, and its performance scales with resolution as expected. The CPU is keeping pace, but the GPU's workload is the determining factor for the final output.

FAQ

Q: What is the maximum average FPS this combo can achieve in The Technomancer?

A: The highest average frame rate recorded is 268 FPS, which is achieved at 1920x1080 resolution with the Low settings preset.

Q: Can this system maintain 60 FPS at 4K resolution?

A: Yes, at 4K (3840x2160) with the High settings preset, the system achieves an average of 60 FPS. The Medium preset at this resolution averages 80 FPS, while the Ultra preset drops to 49 FPS.

Q: How does the CPU's performance compare to its nearest rivals?

A: The AMD Ryzen 5 5600G has an average benchmark score of 21088. This is 0.1% higher than the Intel Core i3-1220P's score of 21066 and 0.2% lower than the AMD Ryzen 5 7530U's score of 21133.

Q: What is the frame rate difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the Low preset averages 187 FPS, while the Ultra preset averages 81 FPS. This represents a 106 FPS difference between the lowest and highest graphics presets.

Q: Is this system better than one with an AMD Radeon RX 6750 XT?

A: Based on average benchmark scores, the NVIDIA GeForce RTX 5060 scores 26331, which is 1.2% higher than the AMD Radeon RX 6750 XT's score of 26011. This indicates the RTX 5060 has a slight performance advantage in general benchmarks.

Q: What is the average frame rate at 1080p with High settings?

A: The measured average FPS for the High settings preset at 1920x1080 is 142 FPS.

Measured FPS Breakdown

The following data is a direct breakdown of the measured average frame rates for this combination.

At 1920x1080, the system delivers its highest performance. The Low preset achieves an average of 268 FPS. The Medium preset averages 189 FPS, with a minimum of 160 FPS and a maximum of 217 FPS. The High preset averages 142 FPS. The Ultra preset is the most demanding, with an average of 116 FPS.

At 2560x1440, performance remains strong but scales down as expected. The Low preset averages 187 FPS. The Medium preset averages 132 FPS, with a minimum of 112 FPS and a maximum of 152 FPS. The High preset averages 99 FPS. The Ultra preset averages 81 FPS.

At 3840x2160, the GPU is pushed to its limits. The Low preset averages 113 FPS. The Medium preset averages 80 FPS, with a minimum of 68 FPS and a maximum of 92 FPS. The High preset averages 60 FPS. The Ultra preset averages 49 FPS.