Pc Building Simulator

# Pc Building Simulator Performance Analysis: AMD Ryzen 9 9900X3D + NVIDIA GeForce RTX 5080

The combination of AMD's Ryzen 9 9900X3D and NVIDIA's GeForce RTX 5080 delivers exceptional frame rates in Pc Building Simulator, with the data showing this pairing ranks 112th out of 3002 tested combos, placing it in the top 3.7% of all configurations. This pairing demonstrates that the simulation genre, often considered CPU-bound, responds powerfully to both a high-core-count processor and a flagship-class GPU, with the RTX 5080's 16 GB of GDDR7 memory and the 9900X3D's 128 MB L3 cache combining to produce remarkably high frame rates even at 4K Ultra settings.

Resolution Scaling

The measured FPS data reveals a clear pattern of resolution-dependent scaling that illuminates the balance between CPU and GPU workloads in Pc Building Simulator. At 1080p Low settings, the combo achieves 468 FPS, which drops to 307 FPS at 1440p Low (-34.4%) and further to 161 FPS at 4K Low (-65.6% from 1080p). This steep decline at lower quality presets indicates that the game becomes progressively more GPU-limited as pixel count increases, even with a GPU as powerful as the RTX 5080.

The scaling behavior shifts dramatically when examining higher quality settings. At Ultra settings, the combo produces 232 FPS at 1080p, 146 FPS at 1440p (-37.1%), and 77 FPS at 4K (-66.8%). The percentage drops are remarkably consistent across Low and Ultra presets, suggesting that resolution scaling in Pc Building Simulator follows a predictable pattern regardless of graphical complexity. However, the absolute frame rates at 1080p Ultra (232 FPS) versus 1080p Low (468 FPS) indicate that the game's visual settings impose a significant computational cost that scales independently of resolution.

The 4K to 1080p ratio at High settings reveals the most instructive data point: 80 FPS at 4K versus 244 FPS at 1080p represents a 67.2% reduction. This substantial drop suggests that at 4K, the RTX 5080's rendering pipeline becomes the primary bottleneck, as the GPU must process four times the pixels of 1080p. The fact that 4K Medium (114 FPS) still delivers playable frame rates above 60 FPS indicates that the combo has sufficient headroom for demanding 4K configurations, though Ultra settings at 4K (77 FPS) approach the threshold where frame pacing could become noticeable.

The data shows that the RTX 5080's 960.0 GB/s memory bandwidth and 256-bit bus width become critical factors at higher resolutions. With 16 GB of GDDR7 memory, the GPU can hold larger textures and more complex scene data without spilling to system memory, which explains why the scaling from Medium to Ultra at 4K (114 to 77 FPS, a 32.5% drop) is less severe than the drop from Low to Medium at 4K (161 to 114 FPS, a 29.2% drop). The game appears to demand progressively more GPU resources as quality increases, but the RTX 5080's architecture handles this gracefully.

CPU Role

The AMD Ryzen 9 9900X3D brings substantial processing power to Pc Building Simulator, a simulation title that typically benefits from strong single-threaded performance and ample cache. The CPU's 12 cores and 24 threads, based on the Zen 5 architecture (Granite Ridge codename), provide the computational foundation for the game's simulation logic, which includes complex physics calculations and inventory management systems. The processor's 4.40 GHz base clock and 5.50 GHz boost clock ensure that single-threaded tasks execute rapidly, as evidenced by the 3DMark single-thread score of 1269 and the Cinebench R23 single-core score of 6739.

The 128 MB L3 cache is particularly noteworthy for simulation games, as it allows the CPU to store frequently accessed game data on-die, reducing memory latency. The benchmark data shows the 9900X3D achieves a PassMark single-thread score of 4646 and a Geekbench single-core score of 3041, indicating strong per-core performance that directly benefits Pc Building Simulator's simulation loop. The CPU's 89.6 GB/s memory bandwidth, delivered through dual-channel DDR5 support, ensures that the processor can feed data to the GPU without creating a bottleneck.

The multi-threaded capabilities of the 9900X3D are equally impressive, with a Cinebench R23 multi-core score of 47737 and a Geekbench multi-core score of 22884. These scores suggest that the CPU can handle the game's background simulation tasks, such as component temperature modeling and power draw calculations, while maintaining high frame rates. The PassMark multi-thread score of 56154 and the 3DMark max-threads score of 13795 indicate that the processor scales well with thread count, which is beneficial for a game that may utilize multiple threads for different simulation subsystems.

The CPU's percentile ranking of 91 against all processors places it in the top 9% of CPUs, and its nearest rival comparisons show it is competitive with Intel's Core Ultra 5 245KF (0.6% lower average score) and Core Ultra 5 245K (1.3% higher score). This positioning suggests that while the 9900X3D is not the absolute fastest CPU available, its combination of high clock speeds, large cache, and 12-core configuration provides ample processing power for Pc Building Simulator's requirements.

FAQ

Q: What is the highest average FPS this combo achieves in Pc Building Simulator?

A: The highest average FPS recorded is 468 FPS at 1920x1080 resolution with Low settings. This demonstrates that the combo can push frame rates far beyond what most displays can show, indicating significant headroom for future game updates or more demanding simulation scenarios.

Q: Can this combo handle 4K gaming in Pc Building Simulator?

A: Yes, the data shows 4K Ultra settings deliver 77 FPS average, while 4K High achieves 80 FPS and 4K Medium reaches 114 FPS. Even at 4K Low, the combo produces 161 FPS, comfortably exceeding the 60 FPS threshold for smooth gameplay.

Q: How does the RTX 5080 compare to its nearest GPU rivals?

A: The RTX 5080's average benchmark score of 56083 places it 0.6% above the AMD Radeon 8060S (55757) and 0.7% above the AMD Radeon RX 6750 GRE 12 GB (55698). It trails the AMD Radeon RX 9070 GRE by 2.2% (57367), showing close performance parity with competing GPUs.

Q: What is the CPU's percentile ranking among all processors?

A: The Ryzen 9 9900X3D ranks in the 91st percentile against all CPUs, indicating it outperforms approximately 91% of processors tested in the benchmark database. This high ranking supports its ability to feed the RTX 5080 with sufficient data in Pc Building Simulator.

Q: How does the combo's performance vary between Low and Ultra settings at 1440p?

A: At 2560x1440, the combo achieves 307 FPS on Low settings, 218 FPS on Medium, 154 FPS on High, and 146 FPS on Ultra. The drop from Low to Ultra represents a 52.4% reduction, showing that quality settings have a significant but manageable impact on performance at this resolution.

Q: What is the combo's overall ranking among tested configurations?

A: The combo ranks 112th out of 3002 tested combos in Pc Building Simulator, placing it in the top 3.7% of all configurations. This ranking confirms that the Ryzen 9 9900X3D and RTX 5080 pairing is among the most capable setups for this game.

How This Combo Ranks

The combo's rank of 112 out of 3002 tested configurations places it in the upper echelon of performance, yet the ranking reveals that there are 111 other combos that achieve higher frame rates in Pc Building Simulator. This positioning suggests that while the Ryzen 9 9900X3D and RTX 5080 deliver exceptional performance, there are combinations with even more powerful components or better optimization for this specific title.

The CPU's nearest rival comparisons provide context for the combo's ranking. The Intel Core Ultra 5 245KF has an average score of 55093, which is 0.6% lower than the 9900X3D's 54762 average benchmark score. This marginal difference indicates that the CPU choice has a minimal impact on overall system performance in this game, as both processors deliver similar computational throughput. The Intel Core Ultra 5 245K scores 1.3% higher (54053), while the Intel Xeon 6505P scores 2% higher (53701) and the Intel Core i7-14700F scores 2.1% higher (53620), suggesting that the 9900X3D is slightly below some competitors in average benchmark scores.

The GPU's nearest rivals also inform the combo's ranking. The RTX 5080's average score of 56083 is 0.6% higher than the AMD Radeon 8060S (55757) and 0.7% higher than the AMD Radeon RX 6750 GRE 12 GB (55698), but 2.2% lower than the AMD Radeon RX 9070 GRE (57367). These small percentage differences suggest that GPU selection has a modest impact on the combo's ranking, and the overall position of 112th is likely determined by the synergistic interaction between the CPU and GPU rather than individual component performance.

The fact that this combo ranks 112th despite both components performing near the top of their respective categories suggests that Pc Building Simulator may have specific optimization quirks that favor certain hardware combinations. The 9900X3D's 128 MB L3 cache and the RTX 5080's 16 GB VRAM likely contribute to the combo's strong performance, but other factors such as memory latency, driver optimization, and game engine characteristics may play equally important roles in determining the final ranking.

GPU Role

The NVIDIA GeForce RTX 5080 plays a decisive role in Pc Building Simulator's frame rate output, as evidenced by the substantial differences between resolution and quality settings. The GPU's 10752 shading units, 336 texture mapping units, and 112 render output units provide the raw computational power needed to render the game's 3D environments, which include detailed PC components, workbenches, and storefronts. The Blackwell 2.0 architecture, built on TSMC's 5 nm process with 45,600 million transistors, delivers a FP32 performance of 56.28 TFLOPS, making it more than capable of handling the game's graphical demands.

The RTX 5080's memory subsystem is particularly well-suited for Pc Building Simulator's requirements. The 16 GB of GDDR7 memory, operating at 1875 MHz (30 Gbps effective) across a 256-bit bus, provides 960.0 GB/s of bandwidth. This substantial memory bandwidth ensures that texture streaming and geometry processing at 4K resolutions do not create bottlenecks, as evidenced by the 4K Medium average FPS of 114 and 4K Ultra average FPS of 77. The GPU's 84 RT cores and 336 tensor cores, while not directly relevant to Pc Building Simulator's non-ray-traced rendering, contribute to the overall processing capabilities and future-proofing.

The GPU's clock speeds of 2295 MHz base and 2617 MHz boost provide the execution speed necessary for high frame rates at lower resolutions. The data shows 1080p Low achieving 468 FPS, which approaches the limits of what any GPU can deliver, indicating that the RTX 5080 is not the limiting factor at this resolution. However, at 4K Ultra (77 FPS), the GPU becomes the primary bottleneck, as the increased pixel count and graphical complexity require more shading operations, texture fetches, and memory transactions.

The GPU's percentile ranking of 87 against all GPUs places it in the top 13% of graphics cards, and its nearest rival comparisons show it is closely matched with several AMD offerings. The 0.6% advantage over the Radeon 8060S and 0.7% over the RX 6750 GRE 12 GB, along with the 2.2% deficit to the RX 9070 GRE, indicates that the RTX 5080 sits in a competitive performance band. The GPU's PassMark G3D score of 36565 and Geekbench OpenCL score of 235901 confirm its strong compute and rendering capabilities, which translate directly to the measured FPS in Pc Building Simulator.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the combo's performance across three resolutions and four quality settings, totaling twelve distinct configurations. At 1920x1080, the combo achieves its highest frame rates, with Low settings producing 468 FPS average. Medium settings at 1080p deliver 345 FPS average with a minimum of 293 FPS and maximum of 397 FPS, showing a 104 FPS range that indicates frame time variability during complex scenes. High settings at 1080p reach 244 FPS average, while Ultra settings achieve 232 FPS average, demonstrating that the jump from High to Ultra costs only 12 FPS (4.9% reduction) at this resolution.

At 2560x1440, the performance scales down proportionally. Low settings produce 307 FPS average, representing a 34.4% reduction from 1080p Low. Medium settings at 1440p deliver 218 FPS average with a minimum of 185 FPS and maximum of 250 FPS, showing a 65 FPS range that is narrower than at 1080p, suggesting more stable frame pacing at higher resolutions. High settings achieve 154 FPS average, while Ultra settings deliver 146 FPS average, with the High to Ultra transition costing only 8 FPS (5.2% reduction), mirroring the 1080p pattern.

At 3840x2160, the combo's performance reflects the GPU's increased workload. Low settings produce 161 FPS average, maintaining playability even at 4K. Medium settings at 4K deliver 114 FPS average with a minimum of 97 FPS and maximum of 131 FPS, showing a 34 FPS range that indicates the GPU is working harder to maintain consistent frame delivery. High settings achieve 80 FPS average, while Ultra settings deliver 77 FPS average, with the High to Ultra transition costing only 3 FPS (3.75% reduction), suggesting that at 4K, the GPU reaches its limits and additional quality settings have diminishing returns.

The minimum FPS data points, available only for Medium settings, provide insight into frame consistency. At 1080p Medium, the minimum of 293 FPS is 85% of the average, while at 1440p Medium, the minimum of 185 FPS is 84.9% of the average, and at 4K Medium, the minimum of 97 FPS is 85.1% of the average. This consistent ratio suggests that the combo maintains similar frame pacing characteristics across resolutions, with occasional dips that are proportional to the average frame rate. The maximum FPS values show that the combo can exceed average performance by 15-17% during less demanding scenes, providing headroom for smooth gameplay even during intense simulation moments.