Pc Building Simulator

Pc Building Simulator is a simulation title that responds strongly to both CPU and GPU resources, and the combination of the AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 5080 delivers a remarkably smooth experience across all tested settings and resolutions. The measured data shows this pairing ranks 105th out of 3002 tested combos, placing it in the top 3.5% of all systems evaluated for this game. The benchmark results indicate that this is a high-end configuration capable of handling the game's demands at every preset, though the performance scaling reveals distinct bottlenecks depending on the resolution and settings chosen.

Settings Recommendations

The measured FPS data provides clear guidance on which preset offers the best balance of visual quality and performance for this specific hardware combination. At 1080p, the Ultra preset achieves an average of 232 FPS, while High delivers 244 FPS. The difference between these two settings is only 12 FPS, which is a minimal cost for the visual fidelity increase that Ultra provides. However, the data shows that Medium reaches 345 FPS and Low hits 476 FPS at this resolution, indicating that the game is heavily CPU-bound at lower settings, as the GPU has ample headroom to render frames far beyond what the processor can feed.

Moving to 1440p, the pattern shifts slightly. The Ultra preset averages 146 FPS, High averages 154 FPS, and Medium averages 218 FPS. The jump from High to Ultra costs only 8 FPS, making Ultra the clearly superior choice at this resolution. The 1440p Medium result of 218 FPS shows that even with increased resolution, the system remains highly capable of pushing frame rates well above the 144Hz refresh rate common on modern monitors. At 4K, the Ultra preset drops to 77 FPS, while High averages 80 FPS. This 3 FPS difference between High and Ultra is negligible, but the visual improvements from Ultra settings at 4K are more noticeable due to the higher pixel density.

For the best experience, the data suggests using the Ultra preset at both 1080p and 1440p, as the frame rate costs are minimal compared to High. At 4K, the choice between High and Ultra is more nuanced, as both hover around the 80 FPS mark, which is suitable for 60Hz displays but below the 144Hz threshold. Given that the game is a simulation where smoothness matters more than split-second reaction times, the Ultra preset at 4K is still viable, but players with high-refresh-rate 4K monitors might prefer High to maintain a slightly higher average. The Medium preset at 4K, with its 114 FPS average and a recorded minimum of 97 FPS, offers a compelling middle ground for those who prioritize frame rate consistency over maximum visual detail, as it maintains a comfortable margin above 60 FPS even during demanding scenes.

GPU Role

The NVIDIA GeForce RTX 5080 plays a central role in this system's performance, particularly at higher resolutions and settings. The GPU features 16 GB of GDDR7 memory on a 256-bit bus, providing 960.0 GB/s of bandwidth. This large memory pool and high bandwidth are well-suited for Pc Building Simulator, which can utilize significant texture data and geometry at high resolutions. The GPU's 10752 shading units, 336 texture mapping units, and 112 render output units process the game's visual workload efficiently, as evidenced by the strong frame rates at 4K Ultra.

The GPU's boost clock of 2617 MHz, with a base clock of 2295 MHz, allows it to maintain high performance under sustained load. The benchmark results show the RTX 5080 achieves a PassMark G3D score of 36565, placing it in the 87th percentile among all GPUs. This synthetic benchmark score correlates well with the measured in-game performance, where the GPU handles 4K Ultra at 77 FPS and 1080p Ultra at 232 FPS. The GPU's role becomes more pronounced as resolution increases; at 1080p, the frame rates are likely limited by the CPU's ability to issue draw calls, but at 4K, the GPU's rendering throughput becomes the primary constraint.

The RTX 5080's nearest rivals in synthetic benchmarks include the AMD Radeon 8060S, which scores 55757 (0.6% lower), and the AMD Radeon RX 9070 GRE, which scores 57367 (2.2% higher). These close benchmark scores suggest that the RTX 5080 is competitively positioned in its class, though the measured in-game performance shows that this specific combination with the Ryzen 7 9850X3D produces excellent results. The GPU's 16 GB memory capacity is particularly relevant for Pc Building Simulator at 4K, as the game's texture-rich environments can consume significant VRAM, and the 960.0 GB/s bandwidth ensures that texture streaming does not become a bottleneck.

Resolution Scaling

The measured FPS data reveals a clear pattern of performance scaling from 1080p to 4K, indicating how the system's components interact at different resolutions. At the Low preset, the average frame rate drops from 476 FPS at 1080p to 307 FPS at 1440p, a reduction of 169 FPS (35.5%). Further scaling to 4K yields 161 FPS, which is a 315 FPS drop from 1080p (66.2%). This dramatic scaling at Low settings indicates that the CPU is the limiting component at lower resolutions, as the frame rate decreases disproportionately with resolution, suggesting that the GPU is not fully utilized at 1080p.

At the Medium preset, the scaling is more moderate but still significant. The average drops from 345 FPS at 1080p to 218 FPS at 1440p (36.8% reduction), and then to 114 FPS at 4K (66.9% reduction from 1080p). The recorded minimum FPS at 1080p Medium is 293, which drops to 185 at 1440p and 97 at 4K. This consistent scaling pattern suggests a balanced workload between CPU and GPU, where both components contribute to the overall frame rate.

For the High preset, the scaling is steeper in relative terms. The average frame rate decreases from 244 FPS at 1080p to 154 FPS at 1440p (36.9% reduction), and then to 80 FPS at 4K (67.2% reduction). The Ultra preset shows similar behavior, with averages of 232 FPS at 1080p, 146 FPS at 1440p, and 77 FPS at 4K. The nearly identical scaling percentages across all presets—hovering around 37% for the 1080p to 1440p transition and 67% for the 1080p to 4K transition—indicate that the limiting component is consistent regardless of settings.

This uniform scaling pattern points to the GPU as the primary bottleneck at 4K, as the frame rate drops proportionally with the pixel count increase. The 1440p to 4K transition represents a 2.25x increase in pixels, and the frame rate drops by roughly half, which aligns with GPU-bound behavior. At 1080p, the high frame rates (476 FPS at Low) exceed what the CPU can maintain consistently, indicating that the Ryzen 7 9850X3D's 8 cores and 16 threads, with a boost clock of 5.60 GHz, are the limiting factor at lower resolutions. The CPU's PassMark multithread score of 41318 and single-thread score of 4704 support this analysis, as these are strong scores but not sufficient to feed the GPU at extreme frame rates.

How This Combo Ranks

The combination of the AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 5080 achieves a rank of 105 out of 3002 tested combos in Pc Building Simulator, placing it in the top 3.5% of all configurations. This high ranking is consistent with the individual component performance: the CPU's average benchmark score of 58386 places it in the 92nd percentile among all CPUs, while the GPU's average score of 56083 places it in the 87th percentile among all GPUs. The synergy between these two components is evident in the measured frame rates, which show no significant bottleneck at any resolution or setting.

The CPU's nearest rivals in synthetic benchmarks include the Intel Xeon Platinum 8260M, which scores 58323 (0.1% lower), and the Intel Core i9-14900, which scores 58115 (0.5% lower). The AMD Ryzen AI 9 HX 470 scores 58826, which is 0.7% higher than the 9850X3D. These close scores indicate that the 9850X3D is competitively positioned in the CPU market, though its 96 MB of shared L3 cache likely provides an advantage in gaming workloads that is not fully captured by synthetic benchmarks.

Similarly, the GPU's nearest rivals show a tight cluster of scores. The AMD Radeon 8060S scores 55757 (0.6% lower), the AMD Radeon RX 6750 GRE 12 GB scores 55698 (0.7% lower), and the AMD Radeon Pro W5700X scores 54828 (2.3% lower). The AMD Radeon RX 9070 GRE scores 57367, which is 2.2% higher than the RTX 5080. Despite the RX 9070 GRE having a higher synthetic score, the measured in-game performance of the RTX 5080 in this system demonstrates that real-world results can differ from theoretical benchmarks.

The combo's rank of 105 suggests that there are 104 other configurations that perform better in Pc Building Simulator, likely featuring more powerful GPUs or CPUs that are better optimized for this specific game. However, given that this is a simulation game with relatively modest graphics requirements compared to AAA shooters, the 105th rank out of 3002 represents excellent performance that will satisfy most players. The data shows that this combination can achieve 4K Ultra at 77 FPS, which is well above the 60 FPS threshold for smooth gameplay, and 1440p Ultra at 146 FPS, which is ideal for high-refresh-rate monitors.

FAQ

Q: What is the best resolution to play Pc Building Simulator with this hardware?

A: The data shows that 1440p Ultra delivers 146 FPS on average, which is well suited for high-refresh-rate displays. At 1080p Ultra, the average is 232 FPS, while 4K Ultra averages 77 FPS. The choice depends on your monitor's refresh rate and resolution, but 1440p Ultra offers the best balance of high frame rates and visual fidelity.

Q: How does the CPU's performance compare to its rivals?

A: The Ryzen 7 9850X3D has an average benchmark score of 58386, which is 0.1% higher than the Intel Xeon Platinum 8260M (58323) and 0.5% higher than the Intel Core i9-14900 (58115). It is 0.7% lower than the AMD Ryzen AI 9 HX 470 (58826). These differences are minimal, indicating the CPU is competitively positioned.

Q: Is the RTX 5080's 16 GB of VRAM sufficient for Pc Building Simulator?

A: Yes, the measured data shows strong performance at 4K Ultra with 77 FPS average. The 16 GB of GDDR7 memory with 960.0 GB/s bandwidth provides ample capacity and speed for the game's textures and geometry, even at the highest resolution tested.

Q: Why does the frame rate drop so significantly from 1080p to 4K?

A: The data shows a consistent ~67% reduction in average FPS from 1080p to 4K across all settings. This indicates the GPU becomes the limiting factor at higher resolutions, as the pixel count increases by 4x while the frame rate drops by roughly 2/3, which is typical for GPU-bound scenarios.

Q: What is the minimum FPS recorded at 4K Medium?

A: At 4K Medium, the minimum FPS recorded is 97, with an average of 114 FPS and a maximum of 131 FPS. This minimum is still above the 60 FPS threshold, indicating smooth gameplay even during demanding scenes.

Q: How does this combo rank compared to other tested systems?

A: This combination ranks 105th out of 3002 tested combos in Pc Building Simulator, placing it in the top 3.5% of all configurations. This high ranking is supported by the individual component percentiles: the CPU is in the 92nd percentile and the GPU is in the 87th percentile.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across three resolutions and four settings presets. At 1920x1080, the Low preset achieves an average of 476 FPS, the highest recorded in this test. The Medium preset at this resolution averages 345 FPS, with a recorded minimum of 293 FPS and maximum of 397 FPS. High settings at 1080p yield 244 FPS on average, while Ultra provides 232 FPS. These results show that at 1080p, the system is capable of extremely high frame rates, likely limited by the CPU's ability to process game logic and draw calls.

At 2560x1440, the performance remains strong but scales down as expected. The Low preset averages 307 FPS, Medium averages 218 FPS (with a minimum of 185 and maximum of 250), High averages 154 FPS, and Ultra averages 146 FPS. The 1440p results demonstrate that this combination can easily drive high-refresh-rate monitors at 144Hz or even 165Hz when using Medium settings or lower, while High and Ultra still provide smooth gameplay above 140 FPS.

At 3840x2160, the performance drops to more moderate levels. Low settings average 161 FPS, Medium averages 114 FPS (with a minimum of 97 and maximum of 131), High averages 80 FPS, and Ultra averages 77 FPS. The 4K results show that the system maintains playable frame rates at all settings, with even the Ultra preset staying above the 60 FPS threshold. The Medium preset at 4K, with its 114 FPS average and 97 FPS minimum, offers a particularly good balance for players who want high frame rates at 4K resolution.

The data reveals a consistent pattern across all settings: the frame rate scales nearly identically with resolution changes, regardless of the preset. The 1080p to 1440p transition reduces FPS by approximately 37% across all settings, while the 1080p to 4K transition reduces FPS by approximately 67%. This uniformity suggests that the performance is dominated by the GPU's rendering throughput at higher resolutions, with the CPU only becoming a limiting factor at 1080p Low, where 476 FPS exceeds what the processor can consistently deliver.