Palworld

The AMD Ryzen 5 5600X and Intel Arc B570 combination ranks in the 2362nd position out of 2944 tested combos in Palworld, placing it in the lower portion of the performance distribution. This pairing sits in the 20th percentile of all tested combinations, indicating that while it can run the game, it does not deliver top-tier frame rates. The data shows a configuration that is functional for playable sessions at specific settings, but it lacks the headroom for maximum quality at high resolutions. The measured results reveal a clear pattern: this combo favors lower settings and lower resolutions to achieve smooth gameplay, with performance dropping sharply as graphical demands increase.

How This Combo Ranks

The combo rank of 2362 out of 2944 tested combinations in Palworld places this system firmly in the lower third of the performance spectrum. Benchmark results indicate that this pairing is not optimized for this game, as it trails a significant majority of other CPU-GPU combinations. The percentile standing suggests that users will need to make compromises in visual fidelity to maintain acceptable frame rates. The data shows a configuration that is more suited to 1080p gaming than higher resolutions, where the gap between this combo and better-performing ones widens considerably. With a ranking this low, the expectation should be set for moderate performance rather than high-end capability. The Ryzen 5 5600X and Arc B570 do not synergize well enough to overcome the demands of Palworld, resulting in a system that delivers playable but not impressive results.

GPU Role

The Intel Arc B570 brings 10 GB of GDDR6 memory on a 160-bit bus, providing a memory bandwidth of 380.0 GB/s. Its base and boost clocks are both set at 2500 MHz, which is a relatively high operating frequency for a graphics card in this class. The GPU features 2304 shading units, 144 TMUs, and 80 ROPs, along with 18 ray tracing cores. In Palworld, the memory configuration appears to be sufficient for the game’s requirements at lower settings, but the GPU’s overall compute throughput of 11.52 TFLOPS becomes a limiting factor at higher presets. The measured FPS data shows that the Arc B570 handles 1080p Low settings well, achieving an average of 130 FPS, but this drops to 61 FPS at Ultra settings, indicating a significant performance hit as the workload increases. At 1440p, the GPU manages 85 FPS on Low but falls to 40 FPS on Ultra, while at 4K, the numbers are 47 FPS on Low and a mere 22 FPS on Ultra. The 10 GB VRAM capacity does not appear to be a bottleneck in these tests, as the frame rate drops correlate more strongly with resolution and settings than with memory limitations. The GPU’s pixel rate of 200.0 GPixel/s and texture rate of 360.0 GTexel/s are adequate for lower resolutions, but they struggle to keep pace with the demands of 4K rendering, especially at higher quality settings. The Arc B570’s performance in Palworld is characterized by a steep drop-off from Low to Ultra settings, with the GPU showing its best results at 1080p where it can maintain frame rates above 100 FPS only on the Low preset.

FAQ

Q: What is the best resolution for this combo in Palworld?

A: The data shows that 1920x1080 is the most effective resolution for this combo, with average FPS ranging from 61 at Ultra settings to 130 at Low settings. Higher resolutions like 2560x1440 and 3840x2160 produce lower frame rates, with 4K falling below 50 FPS even at Low settings.

Q: How does the Arc B570 perform at 1440p in this game?

A: At 2560x1440, the Arc B570 delivers an average of 85 FPS on Low settings, 69 FPS on Medium, 53 FPS on High, and 40 FPS on Ultra. The Medium preset shows a minimum FPS of 59 and a maximum of 80, indicating playable but not consistently smooth performance.

Q: Is the Ryzen 5 5600X a bottleneck for this GPU?

A: The CPU has 6 cores and 12 threads with a boost clock of 4.60 GHz, which is generally capable for gaming. The benchmark results show that the combo ranks low overall, but the CPU’s single-thread performance, as indicated by a 3dmark_single_thread score of 917, is adequate for Palworld. The bottleneck appears more likely on the GPU side, given the sharp FPS drops at higher settings.

Q: What is the frame rate difference between Low and Ultra settings at 1080p?

A: At 1920x1080, the average FPS drops from 130 on Low to 61 on Ultra, representing a 53% reduction in performance. This is a substantial decrease, suggesting that Ultra settings impose a heavy load on the GPU.

Q: Does the combo maintain 60 FPS at 1440p?

A: The data shows that at 2560x1440, the average FPS exceeds 60 only on the Low preset, with 85 FPS. The Medium preset averages 69 FPS, which is above 60, but the High preset drops to 53 FPS, and Ultra falls to 40 FPS.

Q: How does this combo rank compared to other CPU-GPU pairings?

A: The combo rank is 2362 out of 2944, placing it in the bottom 20% of tested combinations for Palworld. This indicates that many other pairings deliver higher frame rates, making this a lower-performing option for this specific game.

Measured FPS Breakdown

At 3840x2160, the combo produces an average of 30 FPS on High settings, 47 FPS on Low, 38 FPS on Medium, and 22 FPS on Ultra. The Medium preset shows a minimum of 33 FPS and a maximum of 44 FPS, with no min or max data provided for the other settings. These numbers indicate that 4K gaming is not viable for this combo, as even the Low preset fails to reach 60 FPS, and Ultra drops to unplayable levels. Moving to 2560x1440, the performance improves significantly: High averages 53 FPS, Low averages 85 FPS, Medium averages 69 FPS with a min of 59 and max of 80, and Ultra averages 40 FPS. The 1440p results show a clear trend where only Low and Medium presets maintain frame rates above 60 FPS, with High and Ultra falling below that threshold. At 1920x1080, the combo performs at its best: High averages 81 FPS, Low averages 130 FPS, Medium averages 105 FPS with a min of 89 and max of 121, and Ultra averages 61 FPS. The 1080p data reveals that the combo can handle all settings above 60 FPS, with Low and Medium providing very smooth gameplay and Ultra barely meeting the 60 FPS mark. Across all resolutions, the pattern is consistent: Low settings offer the highest frame rates, followed by Medium, then High, with Ultra providing the lowest performance. The gap between Low and Ultra widens with increasing resolution, from a 69 FPS difference at 1080p to a 25 FPS difference at 4K, showing that the GPU’s limits are more pronounced at lower resolutions where the frame rates are higher.

CPU Role

The AMD Ryzen 5 5600X is a 6-core, 12-thread processor from the 5000 series, based on the Zen 3 architecture on a 7 nm process. It has a base clock of 3.70 GHz and a boost clock of 4.60 GHz, with 32 MB of L3 cache. The CPU’s benchmark scores indicate solid performance, with a Cinebench R23 multicore score of 11838 and a single-core score of 1541, along with a Geekbench multicore score of 9173 and single-core score of 1989. In Palworld, the CPU’s role is to feed the GPU with game data, and the data suggests that the Ryzen 5 5600X is not the primary limiting factor in this combo. The measured FPS at 1080p Low settings reaches 130 FPS, which is a high frame rate that the CPU can support without being a bottleneck. However, at 4K Ultra, the FPS drops to 22, which is more likely due to GPU limitations rather than CPU constraints. The CPU’s 3dmark_16_threads score of 5582 and max_threads score of 5588 show that it has sufficient multi-threaded capability for Palworld’s demands. The processor’s 75th percentile ranking among all CPUs indicates it is above average, but this does not translate to top-tier gaming performance in this specific title. The combo’s low overall rank suggests that the CPU and GPU together do not produce exceptional results, but the CPU alone appears capable, with the bottleneck likely residing in the GPU or the interaction between the two components. The Ryzen 5 5600X supports DDR4 memory with a bandwidth of 51.2 GB/s, which is adequate for gaming, and its PCIe Gen 4 interface with 20 lanes provides sufficient data transfer speed. In comparison to its nearest rivals, the Ryzen 5 5600X has an average benchmark score of 21771, which is nearly identical to the AMD Ryzen 7 4800H at 21749, the AMD Ryzen 5 PRO 6650U at 21874, the Intel Core i7-11700 at 21891, and the AMD EPYC 9554P at 21899. This places the CPU within a tight performance band, indicating that its processing power is not the differentiator in this combo’s low ranking.

Settings Recommendations

The data shows that the most balanced experience for this combo is achieved at 1920x1080 with Medium settings, which delivers an average of 105 FPS with a minimum of 89 FPS and a maximum of 121 FPS. This preset offers a good mix of visual quality and performance, keeping frame rates well above the 60 FPS threshold while providing more detail than Low settings. For users prioritizing maximum smoothness, the Low preset at 1080p yields 130 FPS, which is ideal for competitive play or fast-paced action, though visual fidelity is reduced. At 2560x1440, the Medium preset averages 69 FPS with a minimum of 59 FPS, making it the only setting at this resolution that consistently maintains near-60 FPS performance. The High preset at 1440p drops to 53 FPS, which may be acceptable for some players but falls below the smoothness standard. At 3840x2160, no setting provides a playable experience, with the highest average being 47 FPS on Low, which is below the 60 FPS target. The Ultra preset at any resolution is not recommended, as it produces the lowest frame rates across the board, including 61 FPS at 1080p, which is only marginally above 60 and represents a significant performance cost for minimal visual gains. The measured data indicates that the optimal configuration is 1080p with Medium settings, offering a 105 FPS average that balances quality and speed. For those with 1440p monitors, the Medium preset is the best choice, providing 69 FPS with acceptable minimums. The combo should be avoided at 4K, as even Low settings fail to reach 50 FPS, making the experience choppy and unsatisfying. Users who prefer higher visual fidelity should stick to 1080p High, which averages 81 FPS, but should be aware that this is a 24 FPS drop from Medium. Overall, the settings recommendations from the data are clear: prioritize 1080p resolution and choose Medium or Low settings for the best performance, while avoiding Ultra and 4K altogether.