Palworld

Palworld pairs the AMD Ryzen 5 5600X with the Intel Arc B580, a combination that lands at rank 1328 out of 1718 tested combos in this game. The measured data reveals a system that can handle the survival title’s demands, but the balance between CPU and GPU shifts dramatically depending on the resolution and preset chosen. The 6-core, 12-thread Zen 3 processor provides a solid foundation, while the 12 GB Arc B580 graphics card shows clear strengths at lower resolutions, though 4K Ultra proves to be a significant hurdle.

Settings Recommendations

The benchmark results across all measured rows indicate that the "High" preset delivers the most balanced experience for this hardware combination. At 1920x1080, High settings produce an average of 91.9 FPS, which is comfortably above the 71.4 FPS seen at Ultra and still substantially higher than the 148 FPS floor of Low settings. The jump from High to Ultra at 1080p costs roughly 20 FPS, a 22% drop, while the visual fidelity gains are typically marginal in a game like Palworld.

For users prioritizing smoothness over maximum detail, Medium at 1440p offers an appealing middle ground. The data shows 81 FPS at 2560x1440 Medium, compared to 57.8 FPS at High and 46.1 FPS at Ultra. This suggests that Medium is the sweet spot for 1440p, providing a playable frame rate that remains well above the 60 FPS threshold. At 4K, however, even Medium drops to 42 FPS, which may be too low for some players, making High at 1440p or Medium at 1080p the most practical recommendations for sustained play.

GPU Role

The Intel Arc B580 brings 12 GB of GDDR6 memory on a 192-bit bus, delivering 456.0 GB/s of bandwidth. Its base and boost clocks are both set at 2670 MHz, and the card operates at a 190 W TDP. The benchmark data indicates that the GPU is the primary driver of performance differences between presets, with the gap between Low and Ultra widening as resolution increases. At 1080p, the spread from Low (148 FPS) to Ultra (71.4 FPS) is 76.6 FPS, while at 4K the same preset change results in a 31.5 FPS difference (55.5 to 24 FPS).

The card’s 13.67 TFLOPS of FP32 compute and 20 ray tracing cores suggest it is a capable mid-range part, but the measured results show it struggling to maintain high frame rates at 4K Ultra. The GPU’s percentile ranking of 66 places it in the upper third of all GPUs, and its nearest rival, the NVIDIA GeForce RTX 4060, shows a deltaPct of -0.7, meaning the Arc B580 is slightly ahead in aggregate benchmarks. The 12 GB VRAM is likely sufficient for Palworld’s open-world environments, but the 31.5 FPS at 4K High indicates the card’s raw compute limits are being reached.

Resolution Scaling

The FPS progression from 1080p to 4K reveals a strong dependence on resolution, with the Arc B580 showing a clear performance ceiling. At High settings, the average frame rate drops from 91.9 FPS at 1080p to 57.8 FPS at 1440p, a 37% reduction, and then to 31.5 FPS at 4K, another 45% reduction. This pattern suggests that the GPU is the limiting component at higher resolutions, as the CPU’s role diminishes when pixel fill rates become the bottleneck.

The Low preset shows a similar but less severe trend: 148 FPS at 1080p, 98.1 FPS at 1440p, and 55.5 FPS at 4K. The percentage drop from 1080p to 4K is 62.5% for Low, compared to 65.7% for High, indicating that the scaling penalty is relatively consistent across settings. At 4K, even Low settings cannot reach 60 FPS, which strongly implies that the Arc B580 is not suited for 4K gaming in Palworld, regardless of how much graphical detail is sacrificed.

Measured FPS Breakdown

At 1920x1080, the data shows a clear hierarchy: Low delivers 148 FPS, Medium 118.4 FPS, High 91.9 FPS, and Ultra 71.4 FPS. The performance gap between Low and Ultra is 76.6 FPS, representing a 51.8% reduction in frame rate when pushing to maximum settings. The step from Medium to High is 26.5 FPS, while High to Ultra costs 20.5 FPS, suggesting diminishing returns as settings increase.

Moving to 2560x1440, the measured averages are 98.1 FPS for Low, 81 FPS for Medium, 57.8 FPS for High, and 46.1 FPS for Ultra. The spread narrows to 52 FPS between Low and Ultra, and the drop from Medium to High (23.2 FPS) is more pronounced than at 1080p. At 3840x2160, the results are 55.5 FPS for Low, 42 FPS for Medium, 31.5 FPS for High, and 24 FPS for Ultra. The 4K results show that only Low settings approach playability, and even then, the 55.5 FPS average is below the 60 FPS target.

How This Combo Ranks

The Ryzen 5 5600X and Arc B580 combination holds a combo rank of 1328 out of 1718 tested combos in Palworld, placing it in the bottom 23% of all pairings. This ranking is notable given that the CPU alone sits at the 78th percentile among all processors, and the GPU is at the 66th percentile. The discrepancy suggests that the combination is not extracting the full potential from either component in this specific game.

The CPU’s nearest rivals in general benchmarks include the AMD Ryzen 5 5600GT (-0.3% delta) and Intel Core i7-10700 (-0.3% delta), indicating that the 5600X is competitive with other mid-range parts. The GPU’s nearest rival, the NVIDIA GeForce RTX 4060, shows a deltaPct of -0.7, meaning the Arc B580 is slightly ahead. Despite these solid individual scores, the combo’s low rank in Palworld implies that either the game is not well-optimized for this pairing or the GPU’s performance drops disproportionately in this title’s workload.

CPU Role

The AMD Ryzen 5 5600X features 6 cores and 12 threads, with a base clock of 3.70 GHz and a boost clock of 4.60 GHz. Its Zen 3 architecture, built on a 7 nm process, includes 32 MB of L3 cache and supports DDR4 memory. In synthetic benchmarks, the CPU scores 18,578 in Cinebench R23 multi-core and 2,622 in single-core, with a 3DMark max-thread score of 5,588. These numbers indicate a strong mid-range processor that should not bottleneck a GPU like the Arc B580 at lower resolutions.

At 1080p, the CPU’s influence is more apparent, as the frame rates scale well with settings, reaching 148 FPS on Low. However, the drop to 71.4 FPS at Ultra suggests that the CPU can still keep up with the GPU’s output. At 4K, the CPU becomes less relevant, as the GPU’s fill rate limits performance. The 65 W TDP and dual-channel memory bandwidth of 51.2 GB/s are modest figures, but they are sufficient for Palworld’s requirements based on the measured data. The CPU’s 78th percentile ranking confirms that it is a capable part, yet the combo’s low overall rank points to the GPU as the primary constraint in this game.

FAQ

Q: What is the best resolution for this combo in Palworld?

A: Based on the measured FPS, 1920x1080 with High settings delivers 91.9 FPS, which is the most balanced result. At 1440p, Medium provides 81 FPS, while 4K at any setting fails to reach 60 FPS, with the highest being 55.5 FPS on Low.

Q: How does the Arc B580 compare to its nearest GPU rival?

A: The Intel Arc B580 has an average benchmark score of 23,021, which is 0.7% higher than the NVIDIA GeForce RTX 4060’s score of 23,181, according to the deltaPct of -0.7 for the rival.

Q: Is the Ryzen 5 5600X a bottleneck at 1080p?

A: The data does not indicate a CPU bottleneck at 1080p, as frame rates scale from 148 FPS on Low to 71.4 FPS on Ultra. The CPU’s 12 threads and 4.60 GHz boost clock appear sufficient to feed the GPU at this resolution.

Q: What is the FPS difference between Low and Ultra at 1440p?

A: At 2560x1440, Low settings produce 98.1 FPS, while Ultra produces 46.1 FPS, a difference of 52 FPS or a 53% reduction in performance.

Q: Does the combo rank in the top half of tested systems?

A: No, the combo ranks 1328 out of 1718, placing it in the bottom 23% of all tested combos for Palworld, despite the individual components ranking at the 78th and 66th percentiles.

Q: Can this system run Palworld at 4K Ultra?

A: The measured 4K Ultra average is 24 FPS, which is not a playable frame rate. Even 4K High only reaches 31.5 FPS, so 4K gaming is not recommended with this hardware.