Outriders

# Outriders Performance Analysis: Intel Core Ultra 7 265K + Intel Arc B570

The Intel Core Ultra 7 265K paired with the Intel Arc B570 delivers a mid-pack performance profile in Outriders, ranking 2329th out of 2913 tested combinations. This places the combo in the lower-middle tier of the database, with the Arc B570's 65th percentile standing among all GPUs and the Core Ultra 7 265K's 94th percentile among all CPUs suggesting a GPU-limited pairing. The measured frame rates across resolutions reveal a card that handles 1080p competently but struggles to maintain playable performance at 4K, particularly at higher quality presets.

Resolution Scaling

The resolution scaling behavior of this combo is telling. At 1080p Low, the system produces 176 FPS average, which drops to 111 FPS at 1440p Low — a 37% reduction. Moving to 4K Low, the average falls to 58 FPS, another 48% drop from the 1440p figure. This steep scaling curve indicates the GPU becomes the primary bottleneck as pixel count rises, which is expected given the Arc B570's 10 GB GDDR6 memory on a 160-bit bus with 380.0 GB/s bandwidth.

At High settings, the scaling pattern is similar but with lower absolute numbers: 96 FPS at 1080p, 61 FPS at 1440p (a 36% drop), and 32 FPS at 4K (a 48% drop from 1440p). The consistent percentage reductions across Low and High presets suggest the limiting component remains the GPU throughout, rather than the CPU. The Core Ultra 7 265K's 20 cores and 20 threads with a 5.50 GHz boost clock are unlikely to constrain frame rates at these levels, especially given the CPU's 94th percentile ranking.

The 4K Ultra preset delivers only 23 FPS average, which is 28% below the 4K High result. This disproportionate penalty at the highest quality tier points to the GPU's shading units (2304) and 80 ROPs being overwhelmed by the combination of resolution and settings. The gap between 1080p Medium (128 FPS) and 4K Medium (42 FPS) represents a 67% reduction, further emphasizing that the Arc B570's compute resources scale poorly as resolution increases.

Settings Recommendations

Based on the measured rows, the Medium preset at 1440p offers the most balanced experience. The 81 FPS average with a minimum of 69 FPS and maximum of 93 FPS provides smooth gameplay while maintaining visual fidelity above Low settings. This configuration sits comfortably above the 60 FPS threshold and leaves headroom for demanding scenes. At 1080p, Medium delivers 128 FPS with a minimum of 109 FPS and maximum of 148 FPS, which is excellent for high-refresh-rate displays.

For users prioritizing maximum visual quality, High at 1440p (61 FPS average) is the highest preset that remains playable at that resolution. The 4K High result of 32 FPS is below the playability threshold for most users, and 4K Ultra at 23 FPS is effectively unplayable. The data suggests that 4K is only viable with Low settings, which produces 58 FPS — a marginal experience that sacrifices significant visual quality.

At 1080p, Ultra delivers 70 FPS average, which is playable but represents a 28% performance hit compared to High (96 FPS). Given that the Medium preset at 1080p offers 128 FPS, the incremental visual improvements from Medium to Ultra may not justify the 45% frame rate reduction. The sweet spot for this combo is clearly 1080p Medium or High, or 1440p Medium, depending on whether the user prioritizes frame rate or resolution.

GPU Role

The Intel Arc B570's specifications directly explain its performance envelope in Outriders. The card features 10 GB of GDDR6 memory on a 160-bit bus, delivering 380.0 GB/s of bandwidth. The 2304 shading units operate at a fixed 2500 MHz base and boost clock, producing 11.52 TFLOPS of FP32 compute. The 144 texture mapping units and 80 ROPs provide a 360.0 GTexel/s texture rate and 200.0 GPixel/s pixel rate, respectively.

These specifications place the Arc B570 at the 65th percentile among all GPUs, with an average benchmark score of 20556. Its nearest rivals include the NVIDIA GeForce RTX 3070 Mobile (deltaPct 0.1), Intel Arc A750 (deltaPct -0.1), NVIDIA Quadro M4000M (deltaPct 0.4), and AMD Radeon R9 M390X (deltaPct -0.5). The near-identical scores between these cards — all within 0.5% of each other — indicate the Arc B570 sits in a tightly contested performance tier.

The memory configuration is particularly relevant for Outriders. The 10 GB capacity is sufficient for 1080p and 1440p at most settings, but the 380.0 GB/s bandwidth may become a limiting factor at 4K, where the pixel throughput demands more data movement. The 160-bit bus width is narrower than many competing cards, which likely contributes to the steep performance drop at 4K Ultra (23 FPS). The card's 150 W TDP and dual-slot design suggest thermal headroom is adequate for sustained gaming loads.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest results. Low settings produce 176 FPS average, Medium achieves 128 FPS with a minimum of 109 FPS and maximum of 148 FPS, High reaches 96 FPS, and Ultra drops to 70 FPS. The progression from Low to Ultra shows a 60% reduction in frame rate, which is substantial but expected given the increasing pixel shading and texture filtering demands.

At 2560x1440, performance scales down predictably. Low yields 111 FPS, Medium provides 81 FPS (minimum 69, maximum 93), High manages 61 FPS, and Ultra falls to 44 FPS. The Medium preset at 1440p shows the narrowest frame time variance of any resolution, with the 69-93 FPS range indicating relatively consistent performance. The Ultra preset at 1440p (44 FPS) is borderline playable, while High at 61 FPS is the practical ceiling for smooth gameplay.

At 3840x2160, the Arc B570 struggles. Low produces 58 FPS, Medium drops to 42 FPS (minimum 36, maximum 49), High falls to 32 FPS, and Ultra bottoms out at 23 FPS. The Medium preset's minimum of 36 FPS indicates occasional dips into stutter territory. The 4K results confirm that this combo is not suited for high-resolution gaming with this title, as even Low settings barely maintain 60 FPS and the higher presets fall well below playable thresholds.

FAQ

Q: Can this combo run Outriders at 4K?

A: Only at Low settings, where it produces 58 FPS average. Medium drops to 42 FPS, High to 32 FPS, and Ultra to 23 FPS. The 4K experience is severely limited by the Arc B570's GPU resources.

Q: What is the best preset for smooth gameplay at 1440p?

A: Medium provides 81 FPS average with a minimum of 69 FPS, which offers the best balance of visual quality and frame rate. High at 61 FPS is also playable, while Ultra at 44 FPS is below the ideal threshold.

Q: How does the Arc B570 compare to its nearest GPU rivals?

A: The Arc B570 has an average benchmark score of 20556, placing it within 0.5% of the RTX 3070 Mobile (20534), Arc A750 (20582), Quadro M4000M (20480), and Radeon R9 M390X (20662). Performance is essentially identical across these cards.

Q: Does the Core Ultra 7 265K bottleneck the GPU in this game?

A: No. The CPU's 94th percentile ranking and 20-core/20-thread configuration with a 5.50 GHz boost clock mean it is unlikely to limit frame rates. The steep FPS drops at higher resolutions indicate the GPU is the limiting component.

Q: What performance can I expect at 1080p with High settings?

A: The combo delivers 96 FPS average at 1080p High, which is smooth for most displays. For higher refresh rates, Medium achieves 128 FPS and Low reaches 176 FPS.

Q: Is the Ultra preset ever recommended for this combo?

A: Only at 1080p, where it delivers 70 FPS average. At 1440p Ultra produces 44 FPS and at 4K Ultra just 23 FPS, both below playable thresholds for most users.

CPU Role

The Intel Core Ultra 7 265K is a 20-core, 20-thread processor based on the Arrow Lake architecture, manufactured on a 3 nm process by TSMC. It features a base clock of 3.90 GHz and a boost clock of 5.50 GHz, with a 125 W TDP. The cache hierarchy includes 192 KB of L1 per core, 3 MB of L2 per core, and 30 MB of shared L3 cache. Memory support includes dual-channel DDR5 with 102.4 GB/s bandwidth, and ECC memory is supported.

Benchmark results show the 265K at the 94th percentile among all CPUs, with an average benchmark score of 70879. Its nearest rivals include the Intel Xeon 6511P (deltaPct -0.2), Intel Xeon Platinum 8270 (deltaPct -0.7), Intel Core i7-14700KF (deltaPct 1), and AMD Ryzen 7 9700F (deltaPct 1.3). The CPU's multi-threaded performance is strong, with Cinebench R23 multi-core scoring 35850 and single-core scoring 2020. Geekbench results show 23085 multi-core and 2713 single-core.

In Outriders, the CPU's role is to feed the GPU with draw calls and game logic. The 265K's high single-thread performance (PassMark single-thread score of 4928) ensures the game's main thread runs efficiently, while the 20 cores provide ample headroom for background tasks and multi-threaded engine workloads. The 30 MB of shared L3 cache helps reduce memory latency, and the dual-channel DDR5 bandwidth of 102.4 GB/s is sufficient for this title. The CPU's 3 nm process node and 17,800 million transistors indicate a modern design capable of sustained high clocks without thermal throttling in most scenarios.

How This Combo Ranks

The combo ranks 2329th out of 2913 tested combinations in Outriders, placing it in the 20th percentile of all combos. This low ranking is primarily due to the GPU's position — the Arc B570 sits at the 65th percentile among GPUs, which is respectable but not high-end. The CPU's 94th percentile ranking means the processor is far more capable than the graphics card, creating a significant performance imbalance.

This ranking places the combo below the majority of tested systems, which likely include higher-tier GPUs paired with mid-range or high-end CPUs. The Arc B570's performance tier, as indicated by its nearest rivals (RTX 3070 Mobile, Arc A750, Quadro M4000M, Radeon R9 M390X), suggests this combo is suitable for 1080p gaming with high settings or 1440p with medium settings, but it cannot compete with systems featuring top-tier GPUs.

The gap between the CPU and GPU percentiles (94 vs 65) indicates that upgrading the GPU would yield substantial performance gains in Outriders without requiring a CPU change. The 265K's strong single-thread and multi-thread scores, particularly the Cinebench R23 multi-core result of 35850 and PassMark multi-thread score of 58594, suggest it could drive a significantly more powerful GPU to higher frame rates. However, as configured, this combo is a balanced mid-range solution that delivers playable performance at 1080p and 1440p, with 4K reserved for Low settings only.