Inside

The AMD Ryzen 5 5600GT paired with the NVIDIA GeForce RTX 5060 delivers a remarkably smooth experience in Inside, a game that is far more forgiving than modern AAA titles. The data reveals a combo that is heavily GPU-limited at higher settings but showcases the CPU's strong single-thread performance at lower presets, resulting in frame rates that easily outpace standard display refresh rates across all tested configurations.

Resolution Scaling

The performance scaling from 1080p to 4K in Inside shows a classic pattern where the GPU becomes the primary bottleneck as pixel count increases. At Low settings, the frame rate drops from 307 FPS at 1920x1080 to 160 FPS at 3840x2160, a reduction of roughly 48%. This steep decline suggests that even at low graphical fidelity, the RTX 5060's rendering workload at 4K is substantial enough to cut the headroom nearly in half.

Moving from 1440p to 4K at Medium settings tells a similar story: 204.3 FPS at 2560x1440 falls to 129.5 FPS at 3840x2160. The scaling factor here is about 0.63x, which indicates that the GPU is being pushed harder as resolution increases, but the frame rates remain far above playable thresholds. At High settings, the same resolution jump yields 126.2 FPS down to 81.4 FPS, a 35% drop that still leaves the game comfortably smooth.

The most telling data point is at Ultra settings, where 1080p produces 165.6 FPS and 4K produces 79 FPS. The gap between these two resolutions is 52%, showing that the RTX 5060's 8 GB VRAM and 128-bit memory bus are adequate for 4K Ultra in this specific title, but the scaling curve is steep. Notably, the difference between 1080p and 1440p at Ultra is only 47 FPS (from 165.6 to 118.6), whereas the 1440p to 4K drop is 39.6 FPS. This suggests that the CPU, with its 6 cores and 12 threads, is still contributing meaningfully at lower resolutions, but the GPU takes over as the limiting factor once pixel count rises.

For a puzzle platformer, these numbers indicate that Inside is not a demanding title for this hardware. The frame rates at 4K High (81.4 FPS) are sufficient for most displays, while 1080p Low (307 FPS) is overkill for any standard monitor, pointing to a system that never strains to maintain fluid motion.

GPU Role

The NVIDIA GeForce RTX 5060, built on the Blackwell 2.0 architecture with a 5 nm process, is the clear workhorse in this pairing. Its 8 GB of GDDR7 memory on a 128-bit bus provides 448.0 GB/s of bandwidth, which proves sufficient for Inside's art style, but the data shows that VRAM capacity is not the limiting factor here. The boost clock of 2497 MHz and base clock of 2280 MHz allow the GPU to sustain high throughput, evidenced by the 19.18 TFLOPS of FP32 performance.

The GPU's benchmark scores place it in the 73rd percentile of all GPUs, with an average score of 30109. Its nearest rival, the AMD Radeon RX 7700 XT, scores 30097, a delta of 0%, meaning the RTX 5060 is essentially tied with that card in synthetic benchmarks. This parity is reflected in the game's measured results, where the GPU consistently delivers high frame rates even at 4K.

However, the role of the GPU becomes more nuanced when examining the settings scaling. At 1080p Medium, the frame rate is 281.1 FPS, which drops to 174.3 FPS at High and 165.6 FPS at Ultra. The difference between Medium and High (106.8 FPS) is much larger than between High and Ultra (8.7 FPS), indicating that the High preset introduces a significant shading or texture load that the GPU must process. The RTX 5060's 3840 shading units and 120 texture mapping units handle this well, but the diminishing returns from High to Ultra suggest that the GPU is already near its efficiency sweet spot.

At 4K, the GPU's limitations become more apparent. The drop from 129.5 FPS at Medium to 81.4 FPS at High shows a 37% performance hit, while the further drop to 79 FPS at Ultra is only 3%. This pattern indicates that the GPU's rasterization throughput, rated at 119.9 GPixel/s and 299.6 GTexel/s, is being fully utilized at 4K High, and the Ultra preset adds little visual benefit for the performance cost.

Settings Recommendations

The measured FPS rows provide a clear hierarchy for optimizing the experience in Inside. For players targeting 60 FPS as a baseline, every preset at every resolution exceeds this threshold by a wide margin, so the recommendation hinges on visual fidelity versus raw headroom.

At 1080p, the Ultra preset delivers 165.6 FPS, which is more than sufficient for high-refresh-rate displays. The jump from High (174.3 FPS) to Ultra is minimal at 8.7 FPS, so there is little reason to avoid Ultra if the monitor supports it. At 1440p, Ultra (118.6 FPS) remains highly playable, and the drop from High (126.2 FPS) is again small. For 4K, the High preset at 81.4 FPS is the sweet spot, as it offers a 2.4 FPS advantage over Ultra (79 FPS) while likely providing nearly identical visual quality in a game with such a subdued art style.

The Medium preset offers the best balance for players who want high frame rates without sacrificing too much detail. At 4K, Medium (129.5 FPS) is 59% faster than High, and at 1440p it hits 204.3 FPS, which is ideal for 165 Hz monitors. The Low preset is only recommended for extreme frame rate chasing, as it pushes 1080p to 307 FPS and 4K to 160 FPS, but the visual compromise is likely not worth it for a game that relies on atmospheric lighting and shadow.

Given the data, the practical advice is to run Inside at Ultra for 1080p and 1440p, and switch to High for 4K. This configuration maximizes visual quality while keeping frame rates well above the 75 FPS threshold that most players would perceive as perfectly smooth.

Measured FPS Breakdown

The complete dataset shows the following average frame rates for the AMD Ryzen 5 5600GT and NVIDIA GeForce RTX 5060 combination:

At 1920x1080, the Low preset achieves 307 FPS, Medium reaches 281.1 FPS, High hits 174.3 FPS, and Ultra lands at 165.6 FPS. The scaling from Low to High is a 43% reduction, while High to Ultra is only a 5% drop, indicating that the High preset is where the GPU starts to feel the load.

At 2560x1440, Low produces 252.9 FPS, Medium delivers 204.3 FPS, High reaches 126.2 FPS, and Ultra settles at 118.6 FPS. The Medium to High drop of 78.1 FPS is the largest single-step reduction in the entire dataset, highlighting that the High preset introduces a significant increase in per-pixel work.

At 3840x2160, Low yields 160 FPS, Medium provides 129.5 FPS, High manages 81.4 FPS, and Ultra bottoms out at 79 FPS. The gap between Low and Medium is 30.5 FPS, while the gap between High and Ultra is just 2.4 FPS, showing diminishing returns at the top end.

These numbers confirm that the combo is never CPU-bound in Inside. Even at 1080p Low, the frame rate of 307 FPS is likely near the CPU's practical limit for the game's engine, but the Ryzen 5 5600GT's single-thread score of 913 in 3DMark and 2438 in Cinebench R23 suggests it can handle this workload without issue. The GPU's passmark G3D score of 20891 aligns with the observed performance, as it sits in the same ballpark as the RX 7700 XT (30097 average score).

How This Combo Ranks

In the benchmark database, this specific combination of the AMD Ryzen 5 5600GT and NVIDIA GeForce RTX 5060 ranks 779 out of 1671 tested combos for Inside. This places it in the upper-middle tier of all systems, meaning that roughly 53% of tested configurations perform better in this game. Given the game's modest requirements, this ranking is expected—the CPU is a budget-oriented 5000-series part, while the GPU is a mid-range Blackwell offering.

The CPU's percentile of 78 versus all CPUs, with an average benchmark score of 20740, puts it in line with the Intel Core i7-10700 (20746, 0% delta) and slightly ahead of the AMD Ryzen 5 5600X (20680, 0.3% delta). This means the processor is not holding back the system in Inside, as its performance is comparable to older high-end parts. The GPU's percentile of 73 and average score of 30109 is similarly competitive, matching the RX 7700 XT (30097) and outpacing the RTX 5070 Mobile (29928) by 0.6%.

The fact that this combo ranks outside the top half is more a reflection of the system's overall positioning than a deficiency. The data shows that in Inside, the frame rates are entirely playable, and the ranking is likely influenced by combos with higher-end GPUs like the RTX 5070 or RX 7900 series. For the target audience of this CPU-GPU pairing, the performance is more than adequate, and the rank of 779 out of 1671 should be viewed as a strong result for a mid-range system.

FAQ

*Q: Can this combo run Inside at 4K 60 FPS?*

A: Yes. The measured data shows 81.4 FPS at 4K High and 79 FPS at 4K Ultra, both comfortably above the 60 FPS threshold. Even at 4K Low, it reaches 160 FPS.

Q: What is the best preset for 1440p gaming on this system?

A: The Ultra preset at 1440p delivers 118.6 FPS, which is ideal for high-refresh monitors. If you prefer higher headroom, Medium at 204.3 FPS is also a strong choice.

Q: Is the CPU or GPU the limiting factor in this game?

A: The GPU is the primary limiter at higher resolutions and settings. At 1080p Low, the 307 FPS result may approach CPU limits, but the Ryzen 5 5600GT's single-thread performance is sufficient to avoid bottlenecks in most scenarios.

Q: How does the RTX 5060 compare to its nearest rival in synthetic benchmarks?

A: The RTX 5060 scores 30109 on average, which is exactly 0% different from the AMD Radeon RX 7700 XT (30097). It also outperforms the NVIDIA GeForce RTX 5070 Mobile (29928) by 0.6%.

*Q: Is 8 GB of VRAM enough for Inside at 4K?*

A: Yes, the measured results show 79-160 FPS at 4K across all presets. The 8 GB GDDR7 memory with 448.0 GB/s bandwidth is more than sufficient for this game's visual complexity.

Q: What frame rate can I expect at 1080p with High settings?

A: The data shows 174.3 FPS at 1080p High. This is more than enough for any 144 Hz monitor and leaves ample room for background tasks or recording software.