Inside

The AMD Ryzen 5 5600 paired with the AMD Radeon RX 6600 delivers a highly capable experience in Inside, with frame rates that remain fluid even at demanding resolutions. The data shows a clear pattern where the GPU becomes the primary constraint as resolution increases, while the CPU provides ample headroom for high-refresh-rate gaming at 1080p. This analysis breaks down the measured performance across resolutions, component roles, and settings.

Resolution Scaling

The measured frame rates reveal a predictable yet significant drop as resolution scales from 1080p to 4K, indicating that the Radeon RX 6600 is the limiting factor at higher pixel counts. At 1080p with High settings, the combo achieves 129.9 FPS, which is already well above the 60 FPS threshold. Moving to 1440p High, the average falls to 91.8 FPS, a reduction of approximately 29% from 1080p. At 4K High, performance drops further to 55.9 FPS, which is less than half of the 1080p result.

The scaling pattern is consistent across all settings presets. For Low settings, the frame rate goes from 257.6 FPS at 1080p down to 186.8 FPS at 1440p and finally 117 FPS at 4K. This indicates that even at the lowest settings, the GPU is still the dominant bottleneck, as the CPU has more than enough capacity to feed frames. The Medium preset follows a similar trajectory: 206.3 FPS at 1080p, 147.9 FPS at 1440p, and 91.6 FPS at 4K. Ultra settings show the most dramatic drop, from 124.8 FPS at 1080p to 87.4 FPS at 1440p and 56 FPS at 4K.

The fact that the 4K High result (55.9 FPS) is nearly identical to the 4K Ultra result (56 FPS) suggests that the High preset is already pushing the GPU to its limits, and additional graphical fidelity in Ultra does not meaningfully change the workload. This near-identical performance indicates that the GPU is fully saturated at 4K regardless of whether High or Ultra is selected, while the CPU has no involvement in this bottleneck. For gamers targeting 60 FPS, the data suggests that 1440p High is the realistic ceiling for this pairing, as it delivers 91.8 FPS with comfortable margin.

GPU Role

The Radeon RX 6600, built on the RDNA 2.0 architecture with the Navi 23 chip, provides the graphical horsepower for this configuration. Its 8 GB of GDDR6 memory on a 128-bit bus delivers 224.0 GB/s of bandwidth, which is sufficient for Inside's modest texture and geometry demands. The GPU's boost clock of 2491 MHz and game clock of 2044 MHz are key to its performance, with the base clock at 1626 MHz.

The GPU's benchmark scores place it at the 69th percentile among all GPUs, with an average benchmark score of 25235. Its nearest rivals show how tightly clustered this performance tier is: the AMD Radeon 890M matches it exactly with a 0% delta, while the AMD Radeon RX 580 2048SP trails by 0.2% and the AMD Radeon RX 6700M leads by 0.2%. The NVIDIA GeForce RTX 3060 Ti is only 0.5% ahead in average score, demonstrating that the RX 6600 sits in a highly competitive performance band.

In Inside, the GPU's role is most evident in the resolution scaling data. The transition from 1440p to 4K at High settings results in a 39% performance drop (from 91.8 FPS to 55.9 FPS), which is a clear sign of GPU-bound operation. The fact that the Low preset at 4K achieves 117 FPS while High at 4K only reaches 55.9 FPS shows that the GPU's fill rate and shading units are the decisive factors, not memory capacity or bandwidth. The 8 GB VRAM is never a limiting factor in this game, as even the highest resolution and preset combination does not show signs of memory pressure.

CPU Role

The AMD Ryzen 5 5600, a 6-core, 12-thread processor from the Zen 3 architecture, provides the computational foundation for this combo. Its base clock of 3.50 GHz and boost clock of 4.40 GHz, combined with 32 MB of shared L3 cache, make it a strong partner for the RX 6600 in this title. The processor's 7 nm process node and 65 W TDP keep it efficient while delivering solid single-thread and multi-thread performance.

The CPU's benchmark scores show a balanced profile. In Cinebench R23, it scores 18309 in multicore and 2584 in single-core, which places it at the 79th percentile among all CPUs with an average benchmark score of 21765. Its nearest rivals include the Intel Xeon D-1746TER (0.6% ahead), AMD EPYC 9554P (0.6% behind), AMD EPYC 9534 (0.6% behind), and Intel Core i7-11700F (0.9% behind). These tight deltas indicate that the Ryzen 5 5600 is well within the performance envelope of much more expensive server and desktop processors.

In Inside, the CPU's role is less critical than the GPU's, as evidenced by the frame rate behavior. At 1080p Low, the combo reaches 257.6 FPS, which is far beyond what most displays can show, indicating that the CPU can easily keep up with the GPU's output. The 3DMark scores support this: the single-thread score of 882 and the 2-thread score of 1737 show that the CPU has strong per-core performance, which is essential for a game that primarily relies on a few threads for game logic and physics. The CPU's 12 threads provide ample parallel capacity, but the data shows that the GPU is the limiting component in all tested scenarios.

How This Combo Ranks

The combination of the Ryzen 5 5600 and RX 6600 ranks 1327 out of 1671 tested combos for Inside, placing it in the lower-middle portion of the database. This ranking reflects the fact that while each component is individually capable, the pairing is not optimized for extreme high-end performance. The GPU's 69th percentile ranking and the CPU's 79th percentile ranking both contribute to this overall position.

The ranking is particularly interesting given the CPU's strong benchmark position. The Ryzen 5 5600 outperforms its closest rival, the Intel Xeon D-1746TER, by 0.6% in average score, yet the combo still ranks relatively low because the RX 6600 is a mid-range GPU. The data shows that the combo's performance in Inside is more heavily influenced by the GPU than the CPU, as evidenced by the resolution scaling trends. At 1080p, the combo easily exceeds 120 FPS on all presets, but at 4K, it struggles to maintain 60 FPS on High and Ultra settings.

When compared to other combos in the database, this pairing offers a balanced experience but does not stand out for extreme frame rates. The ranking of 1327 out of 1671 means that roughly 20% of tested combos perform worse, while the majority perform better. This is consistent with a mid-range GPU paired with a solid mainstream CPU, delivering good but not exceptional performance in a lightweight puzzle platformer.

Settings Recommendations

Based on the measured data, the optimal settings for this combo depend on the target resolution. At 1080p, all settings presets deliver fluid frame rates, with Low at 257.6 FPS, Medium at 206.3 FPS, High at 129.9 FPS, and Ultra at 124.8 FPS. For most users, High settings provide the best balance of visual quality and performance, as the 129.9 FPS result is more than sufficient for smooth gameplay, and the jump from High to Ultra only costs 5.1 FPS while adding minimal visual benefits in a game like Inside.

At 1440p, the choice becomes more critical. High settings deliver 91.8 FPS, which is comfortably above 60 FPS, while Ultra drops to 87.4 FPS. The Low preset at 186.8 FPS is unnecessary for this game's visual style, and Medium at 147.9 FPS offers excellent headroom. The data suggests that High is the recommended preset for 1440p, as it provides a significant improvement over Medium (which is 56 FPS higher) while still maintaining high frame rates.

At 4K, the GPU becomes the limiting factor. High settings produce 55.9 FPS, which is just below the 60 FPS target, while Ultra produces 56 FPS, essentially identical. Medium settings at 91.6 FPS offer a more fluid experience, and Low at 117 FPS is the smoothest but sacrifices visual fidelity. For 4K gaming, the data indicates that Medium is the best choice, as it nearly doubles the frame rate of High while still providing acceptable visual quality for a puzzle platformer. High and Ultra should be avoided at 4K if frame rate consistency is a priority.

FAQ

*Q: What is the best resolution for this combo in Inside?*

A: The data shows that 1440p High delivers 91.8 FPS, which is well above the 60 FPS threshold while maintaining high visual quality. At 1080p, all presets exceed 124 FPS, but the visual upgrade to 1440p is worth the frame rate trade-off.

*Q: Can this combo handle 4K gaming in Inside?*

A: Yes, but with compromises. At 4K Medium, the average frame rate is 91.6 FPS, which is smooth. High and Ultra settings drop to 55.9 FPS and 56 FPS respectively, which are playable but not ideal for fast-paced sections.

Q: How does the RX 6600 compare to its nearest GPU rivals in benchmark scores?

A: The RX 6600 has an average benchmark score of 25235, which is 0% different from the AMD Radeon 890M, 0.2% higher than the RX 580 2048SP, 0.2% lower than the RX 6700M, and 0.5% lower than the RTX 3060 Ti.

Q: Is the Ryzen 5 5600 a bottleneck for the RX 6600 in this game?

A: No. The CPU's benchmark scores, including a single-thread score of 2584 in Cinebench R23, show it can easily feed the GPU. The frame rate drops from 1080p to 4K are consistent with GPU-bound performance, not CPU limitations.

Q: What is the expected frame rate at 1080p Ultra settings?

A: The measured average FPS at 1080p Ultra is 124.8 FPS, which is slightly lower than the 129.9 FPS at High settings. The difference is minimal, making Ultra a viable option for those wanting maximum visual quality.

*Q: How does this combo rank among all tested combinations for Inside?*

A: The combo ranks 1327 out of 1671 total combinations, placing it in the lower-middle tier. This is primarily due to the RX 6600's mid-range status, despite the CPU's strong 79th percentile ranking among all processors.