Fivem

Resolution Scaling

Fivem's performance scaling across resolutions reveals a system that transitions from CPU-bound at 1080p to heavily GPU-bound at 4K. At 1920x1080 with Low settings, the combo delivers 200.5 FPS, but dropping to 2560x1440 Low reduces that to 133.8 FPS—a 33% reduction. Pushing further to 3840x2160 Low yields 72.9 FPS, another 45% drop. This steep decline from 1440p to 4K indicates the GPU becomes the primary limiting factor at higher pixel counts.

The pattern is consistent across all settings presets. At High settings, the frame rate falls from 126.3 FPS at 1080p to 80 FPS at 1440p (37% lower) and then to 46.1 FPS at 4K (42% lower than 1440p). The Ultra preset shows a similar trajectory: 95.4 FPS at 1080p, 63.1 FPS at 1440p, and 37 FPS at 4K. The fact that the relative drop from 1440p to 4K remains steep even at Ultra suggests the rendering load at 4K overwhelms the GPU's capabilities regardless of settings.

The gap between 1080p and 1440p is proportionally smaller than the gap between 1440p and 4K. For Medium settings, 1080p delivers 158.9 FPS, 1440p delivers 102 FPS, and 4K delivers 54.9 FPS. The 1440p-to-4K drop of 46% exceeds the 1080p-to-1440p drop of 36%, reinforcing that the RTX 5060's 8 GB GDDR7 frame buffer and 128-bit memory interface become the bottleneck at 4K. The 448.0 GB/s memory bandwidth is sufficient for 1080p and 1440p, but 4K textures and pixel fill rates strain the 48 ROPs and 119.9 GPixel/s pixel rate.

GPU Role

The NVIDIA GeForce RTX 5060 is the decisive component in this pairing for Fivem, particularly at higher resolutions. Its 8 GB GDDR7 memory with 448.0 GB/s bandwidth and 128-bit bus width directly correlates with the measured frame rates. At 4K Ultra, the combo manages only 37 FPS, while 4K Low reaches 72.9 FPS—indicating that texture and shading complexity heavily tax the GPU.

The GPU's 3840 shading units, 120 TMUs, and 48 ROPs operate at a base clock of 2280 MHz and boost to 2497 MHz. The 19.18 TFLOPS FP32 performance and 299.6 GTexel/s texture rate are adequate for 1080p and 1440p gaming, as evidenced by the 200.5 FPS at 1080p Low and 133.8 FPS at 1440p Low. However, the 4K results show the GPU hitting its architectural limits—the 37 FPS at 4K Ultra is barely playable, and even 4K Medium at 54.9 FPS is below the 60 FPS threshold.

The GPU's benchmark scores contextualize its position. Its Passmark G3D score of 20891 and Geekbench OpenCL score of 120785 place it in the 73rd percentile of all GPUs. The nearest rival, AMD Radeon RX 7700 XT, has an average score of 30097 with a 0% delta, meaning the RTX 5060 is statistically tied with that card in synthetic benchmarks. This parity does not translate to Fivem's 4K performance, where the game's specific engine demands favor cards with larger memory buses.

How This Combo Ranks

The AMD Ryzen 5 5600 + NVIDIA GeForce RTX 5060 combination ranks 898th out of 1792 tested combos for Fivem, placing it in the 50th percentile of all configurations. This middle-of-the-pack ranking is notable because the individual components sit in the 79th percentile (CPU) and 73rd percentile (GPU) respectively. The combination underperforms relative to its component standings, suggesting that Fivem's multiplayer workload does not scale ideally with this pairing.

The CPU's average benchmark score of 21765 places it within 1% of several rivals. The Intel Xeon D-1746TER scores 21635 (0.6% lower), while the AMD EPYC 9554P scores 21899 (0.6% higher). The Intel Core i7-11700F scores 21957, which is 0.9% higher. In CPU-bound scenarios, these rivals would perform nearly identically. However, Fivem's frame rates are more sensitive to GPU performance at 1440p and 4K, which explains why the combo's ranking (50th percentile) lags behind the CPU's individual percentile (79th).

At 1080p, the combo is firmly CPU-bound. The Ryzen 5 5600's 6 cores and 12 threads with a 3.50 GHz base and 4.40 GHz boost clock drive the 200.5 FPS at Low settings. The 32 MB shared L3 cache and Zen 3 architecture provide solid single-thread performance, as shown by the Cinebench R23 single-core score of 2584. The 3DMark single-thread score of 882 and 2-thread score of 1737 indicate strong per-core performance that Fivem's engine can utilize.

FAQ

Q: What is the best resolution for this combo to maintain 60+ FPS?

A: Both 1920x1080 and 2560x1440 maintain 60+ FPS across all settings presets. At 1080p, even Ultra delivers 95.4 FPS, while 1440p Ultra yields 63.1 FPS. At 4K, only Low (72.9 FPS) exceeds 60 FPS; Medium (54.9 FPS), High (46.1 FPS), and Ultra (37 FPS) all fall below.

Q: How does the GPU compare to its nearest rival in synthetic benchmarks?

A: The RTX 5060's average benchmark score of 30109 is statistically identical to the AMD Radeon RX 7700 XT, which scores 30097 with a 0% delta. The NVIDIA Tesla M60 scores 29969 (0.5% lower), and the RTX 5070 Mobile scores 29928 (0.6% lower).

Q: Is the CPU a bottleneck at 1080p?

A: Yes. At 1080p Low, the combo achieves 200.5 FPS, but the CPU's single-thread performance (Cinebench R23 single-core score of 2584) limits further gains. The 3DMark 2-thread score of 1737 and 4-thread score of 3313 show the CPU's threading capabilities are fully utilized at this resolution.

Q: What settings preset at 4K provides the smoothest experience?

A: Low settings at 3840x2160 deliver 72.9 FPS, which is the only 4K preset above 60 FPS. Medium produces 54.9 FPS, High produces 46.1 FPS, and Ultra drops to 37 FPS. For a playable 4K experience, Low is the only viable option.

Q: How does this combo's ranking compare to the component's individual standings?

A: The combo ranks 898th out of 1792 (50th percentile), while the CPU sits in the 79th percentile and the GPU in the 73rd percentile. This indicates the pairing does not fully realize each component's potential in Fivem.

Q: What is the frame rate difference between Medium and High at 1440p?

A: Medium at 2560x1440 delivers 102 FPS, while High delivers 80 FPS—a 22 FPS or 21.6% reduction. The gap widens at 4K, where Medium produces 54.9 FPS and High produces 46.1 FPS, a 16% difference.

Settings Recommendations

The data clearly indicates that Medium settings offer the optimal balance of visual quality and performance for this combo. At 1920x1080, Medium delivers 158.9 FPS, which is 79% of the Low preset's 200.5 FPS but with substantially better visual fidelity. At 2560x1440, Medium produces 102 FPS, comfortably above the 60 FPS threshold and 28% higher than High's 80 FPS.

For users prioritizing maximum frame rates, Low settings at 1080p provide 200.5 FPS, which is ideal for competitive multiplayer scenarios common in Fivem. The 2560x1440 Low preset at 133.8 FPS remains highly responsive and is the best choice for high-refresh-rate 1440p monitors. At 4K, the recommendation shifts dramatically: Low settings at 72.9 FPS are the only playable option, as Medium drops to 54.9 FPS and High falls to 46.1 FPS.

Ultra settings are not recommended at any resolution. Even at 1080p, Ultra yields 95.4 FPS—a 40% reduction from Medium—with visual improvements that do not justify the performance cost. At 1440p, Ultra's 63.1 FPS barely clears the 60 FPS mark, leaving no headroom for frame drops in busy multiplayer scenes. At 4K, Ultra's 37 FPS is unplayable.

The measured data suggests that Medium at 1440p (102 FPS) is the sweet spot for this pairing, offering high frame rates while maintaining modern visual quality. Users with 1080p monitors should also choose Medium (158.9 FPS) for the best balance, reserving Low for competitive play where every frame counts.

CPU Role

The AMD Ryzen 5 5600 provides the computational foundation for Fivem's multiplayer workloads. With 6 cores and 12 threads based on the Zen 3 architecture (Vermeer), the CPU operates at a 3.50 GHz base clock and boosts to 4.40 GHz. This configuration delivers strong single-thread performance, evidenced by the Cinebench R23 single-core score of 2584 and the 3DMark single-thread score of 882.

The CPU's multi-threaded capabilities are equally robust, with a Cinebench R23 multicore score of 18309 and a Passmark multithread score of 21541. The 3DMark 16-thread score of 5641 and max-thread score of 5659 show that the 12 threads scale effectively under load. For Fivem, which must process player positions, vehicle physics, and network synchronization simultaneously, this multi-threaded performance is crucial.

The CPU's 32 MB shared L3 cache and 51.2 GB/s dual-channel DDR4 memory bandwidth support the GPU without creating a bottleneck at 1080p. The Passmark data compression score of 251687 and encryption score of 15531 indicate strong general-purpose processing that benefits game server communication. The CPU's 79th percentile ranking among all processors, with an average benchmark score of 21765, places it just above the Intel Xeon D-1746TER and slightly below the AMD EPYC 9554P.

At 1080p, the CPU is the primary limiter, as shown by the 200.5 FPS ceiling at Low settings. The 3DMark 2-thread score of 1737 and 4-thread score of 3313 suggest that Fivem's engine utilizes multiple threads efficiently, but the CPU's single-core performance (3DMark single-thread score of 882) ultimately caps frame rates. The 65 W TDP and 7 nm process node allow sustained boost clocks, preventing thermal throttling during extended multiplayer sessions.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates across all presets. Low settings produce 200.5 FPS, Medium produces 158.9 FPS (21% lower), High produces 126.3 FPS (37% lower), and Ultra produces 95.4 FPS (52% lower). The progression from Low to Ultra shows a consistent performance cost per tier, with Ultra costing roughly half of the Low preset's frame rate.

At 2560x1440, the frame rates remain strong but show increased GPU dependency. Low delivers 133.8 FPS, Medium delivers 102 FPS (24% lower than Low), High delivers 80 FPS (40% lower), and Ultra delivers 63.1 FPS (53% lower). The Ultra preset at 1440p barely maintains 60 FPS, making it marginal for smooth gameplay.

At 3840x2160, performance drops significantly. Low produces 72.9 FPS, Medium produces 54.9 FPS (25% lower), High produces 46.1 FPS (37% lower), and Ultra produces 37 FPS (49% lower). Only the Low preset achieves playable frame rates at 4K, and even that falls below the 1440p Medium performance.

Comparing resolution scaling per preset: Low settings lose 33% going from 1080p to 1440p (200.5 to 133.8 FPS) and another 45% from 1440p to 4K (133.8 to 72.9 FPS). Medium loses 36% from 1080p to 1440p (158.9 to 102 FPS) and 46% from 1440p to 4K (102 to 54.9 FPS). High loses 37% from 1080p to 1440p (126.3 to 80 FPS) and 42% from 1440p to 4K (80 to 46.1 FPS). Ultra loses 34% from 1080p to 1440p (95.4 to 63.1 FPS) and 41% from 1440p to 4K (63.1 to 37 FPS).

The data shows a clear pattern: the 1440p-to-4K transition consistently produces larger percentage drops than the 1080p-to-1440p transition across all presets. This confirms that the RTX 5060's 8 GB memory and 128-bit bus are the limiting factors at 4K, while the 1080p-to-1440p transition is more evenly balanced between CPU and GPU limitations.