Doom

The AMD Ryzen 5 5600G paired with the Intel Arc B580 delivers a smooth experience in Doom, but the performance profile is heavily dictated by resolution and preset. The data shows a system that can easily exceed 60 FPS at 1080p and 1440p, while 4K remains a challenge that requires settings adjustments. This combination ranks in the 78th percentile of all tested CPU configurations and the 66th percentile for GPUs, indicating a balanced pairing where neither component is a severe bottleneck at most settings. The measured results are from real-world testing, providing a clear picture of what to expect from this specific hardware pairing.

Resolution Scaling

The most telling metric in this dataset is the performance drop as resolution scales up. At 1080p with Low settings, the combo produces an average of 182 FPS. Moving to 1440p Low drops that to 119.2 FPS, a significant 34.5% reduction. Pushing further to 4K Low yields 61.9 FPS, which is another 48% reduction from the 1440p figure. This steep decline from 1080p to 4K strongly indicates that the Intel Arc B580 is the primary limiting factor at higher resolutions. The CPU, with its 6 cores and 12 threads, is capable of feeding the GPU at 1080p, but the GPU’s rendering workload becomes the bottleneck as pixel count increases.

The scaling pattern is consistent across all presets. At High settings, the drop from 1080p (135.1 FPS) to 1440p (87.6 FPS) is 35.2%, and then to 4K (46.8 FPS) is another 46.6%. This shows that the GPU’s workload scales nearly linearly with resolution, regardless of the visual fidelity. The gap between Low and Ultra settings also widens at higher resolutions. At 1080p, the difference between Low and Ultra is 69.2 FPS (182 vs 112.8). At 4K, the same comparison shows a difference of just 20.6 FPS (61.9 vs 41.3). This compression of performance at 4K further confirms that the GPU is saturated, and the CPU’s ability to push higher frame rates becomes irrelevant.

For a user targeting 60 FPS, the data indicates that 4K is only viable with Low settings, which achieves 61.9 FPS. At Medium settings, the 4K average falls to 57.2 FPS, which is below a 60 FPS target. The 1440p resolution is the sweet spot, as even Ultra settings maintain a playable 69.4 FPS. At 1080p, the system is never CPU-bound, as even the highest preset produces 112.8 FPS, which is far above the refresh rate of most standard monitors.

FAQ

Q: Can this combo run Doom at 4K with playable frame rates?

A: Yes, but only at Low settings, where it averages 61.9 FPS. At Medium settings, the average drops to 57.2 FPS, and at High or Ultra, it falls to 46.8 FPS and 41.3 FPS, respectively. For a consistent 60 FPS experience at 4K, Low settings are required.

Q: What is the best resolution for this pairing?

A: The data shows that 2560x1440 offers the best combination of visual fidelity and performance. At this resolution, the system achieves 87.6 FPS on High settings and 119.2 FPS on Low. Even the demanding Ultra preset produces 69.4 FPS, making it a viable option.

Q: How does the CPU’s synthetic performance compare to its nearest rivals?

A: The AMD Ryzen 5 5600G has an average benchmark score of 19983. This places it 0.2% ahead of the Intel Core i7-11600H and 0.3% ahead of the AMD Ryzen Threadripper PRO 5995WX. It is 0.2% behind both the Intel Core i7-11800H and the AMD EPYC 7713P.

Q: What does the GPU’s percentile rank mean for its performance?

A: The Intel Arc B580 sits in the 66th percentile of all GPUs, meaning it performs better than 66% of tested graphics cards. Its average benchmark score is 23021, which is 0.1% higher than the AMD Radeon 760M and 1.3% higher than the NVIDIA GeForce RTX 4060 Mobile.

Q: Is there a large performance jump between Low and Medium settings?

A: Yes, at 1080p, the jump from Low to Medium is significant, going from 182 FPS to 159.2 FPS, a 12.5% decrease. At 4K, the difference is smaller, with Low at 61.9 FPS and Medium at 57.2 FPS, a 7.6% decrease. The relative cost of Medium settings increases as resolution increases.

Q: How does the combo rank among all tested combinations in Doom?

A: This specific pairing of the AMD Ryzen 5 5600G and Intel Arc B580 ranks 1320th out of 1681 tested combos for Doom. This places it in the lower-middle portion of the database, indicating that while it is capable, many other combinations deliver higher frame rates.

How This Combo Ranks

In the database of tested hardware combinations for Doom, this pairing of the AMD Ryzen 5 5600G and Intel Arc B580 achieves a rank of 1320 out of 1681 combos. This position places it in the 21st percentile of all tested configurations, meaning that roughly 79% of other CPU-GPU pairings produce higher average frame rates in this game. The rank is a holistic measure that considers performance across all resolutions and settings.

The ranking is likely influenced by the CPU’s position in the broader market. The Ryzen 5 5600G ranks in the 78th percentile of all CPUs, which is a relatively strong showing. However, the GPU’s 66th percentile rank suggests it is a more average performer. The combination of a strong CPU with a mid-tier GPU means that at high resolutions, the GPU becomes the limiting factor, which may cap the overall combo’s potential compared to pairings with more powerful graphics cards. The data suggests that this is a well-balanced pairing for 1080p and 1440p gaming, but it does not have the raw GPU horsepower to compete with high-end combos at 4K, which likely explains its lower overall rank.

Settings Recommendations

Based on the measured frame rates, the optimal settings depend entirely on the target resolution and desired smoothness. For a 4K display, the only setting that allows for an average above 60 FPS is Low, which produces 61.9 FPS. If the user is willing to accept slightly lower frame rates, Medium provides a more visually appealing experience at 57.2 FPS. High and Ultra settings at 4K should be avoided, as they drop below 47 FPS, which can feel less responsive in a fast-paced FPS.

For 1440p, the system has much more headroom. High settings offer an excellent balance of visual quality and performance, delivering 87.6 FPS. Users with high-refresh-rate monitors can consider Low settings for 119.2 FPS. Ultra settings are also playable at 69.4 FPS, making it a valid choice for those who prioritize image quality over maximum frame rates. The data suggests that 1440p High is the best overall experience for most users.

At 1080p, the system is never stressed. Even Ultra settings produce 112.8 FPS, which is sufficient for smooth gameplay on most monitors. Low settings push performance to 182 FPS, which is ideal for competitive play or high-refresh-rate displays. The recommendation is to use Ultra settings at 1080p, as the performance is already high, and the visual improvements are free. Overall, the data indicates that this combo is best suited for 1080p and 1440p gaming, with 1440p High being the most balanced configuration.

Measured FPS Breakdown

The full dataset provides a detailed look at performance across all tested resolutions and presets. At 1920x1080, the system delivers its highest frame rates. With Low settings, the average FPS is 182. Medium settings reduce this to 159.2 FPS. High settings achieve 135.1 FPS, and the demanding Ultra preset still manages a strong 112.8 FPS. The performance spread at 1080p is wide, with a difference of 69.2 FPS between the lowest and highest presets, indicating that the GPU is not the limiting factor at this resolution.

Moving to 2560x1440, performance scales down predictably. The Low preset averages 119.2 FPS, which is a 34.5% drop from the 1080p Low result. Medium averages 102 FPS, and High averages 87.6 FPS. The Ultra preset produces 69.4 FPS, which is a 38.4% drop from its 1080p counterpart. The difference between Low and Ultra at 1440p is 49.8 FPS, showing a similar scaling pattern to 1080p.

At 3840x2160, the GPU’s limitations become apparent. The Low preset achieves 61.9 FPS, which is a 48% reduction from the 1440p Low result. Medium falls to 57.2 FPS, and High drops to 46.8 FPS. The Ultra preset produces 41.3 FPS, the lowest average in the entire dataset. The performance gap between Low and Ultra at 4K is just 20.6 FPS, which is significantly smaller than at lower resolutions. This confirms that the GPU is fully saturated at 4K, and the choice of preset has a reduced impact on overall frame rates. The data shows a clear hierarchy: 1080p is for high-refresh gaming, 1440p offers a balance, and 4K is only viable with the lowest settings.