Cyberpunk 2077
This combination offers playable performance with an average of 45 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 22 | 23 | 31 | 42 |
| 1440p QHD | 33 | 35 | 47 | 64 |
| 1080p Full HD | 44 | 47 | 63 | 86 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Cyberpunk 2077 with AMD Ryzen 5 5600F + Intel Arc B580, In-Depth Analysis
Cyberpunk 2077 remains one of the most demanding titles in the benchmark suite, and the pairing of the AMD Ryzen 5 5600F with the Intel Arc B580 produces a spread of results that clearly illustrates where the bottlenecks lie. The data indicates a system that is heavily constrained by graphics processing at higher resolutions, while showing surprising headroom at 1080p. This analysis breaks down the measured frame rates, the role of each component, and how this specific combination stacks up against the broader field of tested hardware.
Resolution Scaling
The frame rate drops from 1080p to 4K are steep and consistent, pointing to a GPU-bound scenario at higher resolutions. At Low settings, the average frame rate falls from 86 FPS at 1920x1080 to 64 FPS at 2560x1440, a reduction of roughly 26%. Pushing further to 3840x2160 yields just 42 FPS, which is a 51% drop from the 1080p result. This scaling pattern is characteristic of a graphics card that is being pushed to its limits, as the rendering load increases exponentially with pixel count.
The trend is even more pronounced at Medium settings. The 1080p average of 63 FPS drops to 47 FPS at 1440p, and then plummets to 31 FPS at 4K. The gap between Low and Medium at 4K is 11 FPS, but the scaling from 1440p to 4K at Medium is a 34% performance loss. At High settings, the 4K average of 23 FPS is less than half of the 1080p score of 47 FPS. This indicates that while the CPU has enough power to feed frames at lower resolutions, the Intel Arc B580 becomes the limiting factor as resolution increases, with its 12 GB VRAM and 192-bit memory bus struggling to maintain playable rates.
The data suggests that 1080p is the target resolution for this combo. The jump from 1080p to 1440p at Low settings still offers a playable 64 FPS, but the drop to 42 FPS at 4K makes that resolution impractical for smooth gameplay. The scaling is not linear, and the severe drop at 4K confirms that the GPU is the primary constraint. The CPU, with its 6 cores and 12 threads, appears to have ample headroom to keep up with the GPU's output at lower resolutions, but the graphics card cannot sustain high frame rates when the pixel count increases.
GPU Role
The Intel Arc B580 is built on the Xe2-HPG architecture and features 12 GB of GDDR6 memory on a 192-bit bus, providing 456.0 GB/s of bandwidth. The base and boost clock are both rated at 2670 MHz. In this game, the GPU's role is decisive in determining overall performance. The benchmark results show that at 4K Ultra, the average frame rate falls to just 22 FPS, which is at the very edge of playability. This is a clear sign that the GPU's raw compute power, rated at 13.67 TFLOPS for FP32, is insufficient for the highest settings at 4K.
The 12 GB VRAM capacity is a notable factor. Cyberpunk 2077 is known for its high-resolution textures and dense environments, which can consume significant memory. While the data does not show a direct VRAM usage metric, the performance drop at 4K suggests that the memory subsystem is under heavy strain. The 456.0 GB/s bandwidth, while respectable, appears to be a limiting factor when combined with the GPU's 80 ROPs and 160 TMUs. The pixel rate of 213.6 GPixel/s and texture rate of 427.2 GTexel/s are not enough to handle the demands of 4K Ultra, resulting in the low 22 FPS average.
Comparing to its nearest rivals, the Arc B580's average benchmark score of 23021 places it near the NVIDIA GeForce RTX 2080, which has an avgScore of 22895 with a deltaPct of 0.6. This means the Arc B580 is slightly faster than the RTX 2080 in general compute tests. However, in Cyberpunk 2077 specifically, the measured FPS suggests that the card's performance is consistent with its position in the 68th percentile for all GPUs. The data shows that the GPU is the bottleneck at 1440p and 4K, but at 1080p Low, the 86 FPS average indicates that the card can perform well when the load is lighter.
How This Combo Ranks
In the database of tested combinations, this pairing of the AMD Ryzen 5 5600F and Intel Arc B580 achieves a combo rank of 2161 out of 2920 total combos. This places it in the lower-mid range of all tested systems, which is a reasonable reflection of its performance profile. The rank of 2161 means that roughly 74% of the tested combos perform better in this specific game, which is a significant finding for a system with a modern GPU.
The CPU's individual ranking is much stronger. The Ryzen 5 5600F has an avgBenchmarkScore of 36945, placing it in the 85th percentile of all CPUs. Its nearest rival is the Intel Core Ultra 5 225, which has a nearly identical avgScore of 36938 with a deltaPct of 0. This indicates that the CPU is not the limiting factor in this combo. The GPU, by contrast, has an avgBenchmarkScore of 23021 and sits in the 68th percentile of all GPUs. The discrepancy between the CPU's high percentile and the GPU's lower percentile explains why the combo rank is not higher; the GPU holds the system back.
The data suggests that this combo is CPU-heavy in its balance. The Ryzen 5 5600F is a capable processor that can drive the Arc B580 to its limits, but the GPU's performance ceiling is the primary reason for the 2161 rank. When compared to other combos that might pair the same GPU with a weaker CPU, this combo would likely rank higher, but the overall score is dragged down by the GPU's limitations in this demanding title. The rank of 2161 out of 2920 is a clear indicator that users should not expect high-end performance in Cyberpunk 2077 at high resolutions, but the system is far from the bottom of the pile.
Measured FPS Breakdown
The measured FPS data provides a detailed look at how the system performs across different settings and resolutions. At 1920x1080, the Low preset yields an average of 86 FPS, which is the highest score recorded for this combo. The Medium preset drops to 63 FPS, with a minimum of 54 FPS and a maximum of 73 FPS. High settings produce 47 FPS, while Ultra drops further to 44 FPS. This shows that at 1080p, the system is capable of delivering smooth gameplay even on High settings, though Ultra is borderline.
Moving to 2560x1440, the performance drops significantly. Low settings average 64 FPS, which is still playable. Medium settings average 47 FPS, with a minimum of 40 FPS and a maximum of 54 FPS. High settings drop to 35 FPS, and Ultra falls to 33 FPS. The 1440p results indicate that users will need to compromise on settings to maintain a consistent frame rate above 60 FPS, as only the Low preset achieves that target. The gap between Low and Medium at 1440p is 17 FPS, which is a substantial difference.
At 3840x2160, the system struggles to maintain playable frame rates. Low settings average 42 FPS, which is technically playable but not smooth. Medium settings drop to 31 FPS, with a minimum of 26 FPS and a maximum of 36 FPS. High settings average just 23 FPS, and Ultra is nearly unplayable at 22 FPS. The 4K results show that this combo is not suitable for high-resolution gaming in Cyberpunk 2077. The data clearly shows a linear progression of performance loss as resolution increases, with the GPU being the primary bottleneck.
Settings Recommendations
Based on the measured FPS rows, the optimal experience for this combo is at 1920x1080 with the High preset. The 47 FPS average is not the highest score, but it offers a good balance between visual quality and performance. For a smoother experience, the Medium preset at 1080p provides 63 FPS, which is close to the 60 FPS target for most gamers. The Low preset at 1080p offers the highest frame rate at 86 FPS, but the visual fidelity is significantly reduced, which is not ideal for a game like Cyberpunk 2077 that relies heavily on atmosphere and detail.
At 2560x1440, the Low preset is the only viable option for a playable experience, with 64 FPS. The Medium preset at 47 FPS is acceptable for some players, but the minimum of 40 FPS suggests there will be noticeable dips during intense scenes. The High and Ultra presets at 1440p are not recommended, as the 35 FPS and 33 FPS averages fall below the threshold for smooth gameplay. For users with a 1440p monitor, the data suggests that a mix of Low and Medium settings would be the best approach, though the measurements do not provide a direct "High" vs "Ultra" comparison for a mixed preset.
For 4K, the data is clear: this combo is not suited for the resolution. The Low preset at 42 FPS is the only playable option, but it still lacks the smoothness required for a fast-paced action RPG. The Medium preset at 31 FPS is borderline, and the High and Ultra presets are essentially unplayable. The best experience per the measured rows is undoubtedly at 1080p, where the system can provide a stable frame rate with good visual settings. The recommendation is to target 1080p with High settings for the best visual-to-performance ratio, or drop to Medium for a more consistent 60 FPS experience.
CPU Role
The AMD Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer. It has a base clock of 3.00 GHz and a boost clock of 4.00 GHz. The CPU's benchmark scores show that it is a strong performer, with a Passmark multithread score of 19236 and a single-thread score of 2872. These numbers place it in the 85th percentile of all CPUs, indicating that it is a high-end part for its generation. The CPU’s role in this game is to feed the GPU with data, and the data suggests it does this effectively.
In Cyberpunk 2077, the CPU's performance is not the primary bottleneck. The measured FPS at 1080p Low of 86 FPS shows that the CPU can handle high frame rates, but the GPU limits the system from going higher. The CPU's 32 MB of shared L3 cache and dual-channel DDR4 memory support (with 51.2 GB/s bandwidth) provide sufficient data throughput for the GPU. The CPU's nearest rival, the Intel Core Ultra 5 225, has an avgScore of 36938, which is nearly identical, confirming that the 5600F is a competitive mid-range part.
The data shows that the CPU has a higher percentile ranking than the GPU, which means that the CPU is not holding back the system in this game. If the GPU were more powerful, the system would likely achieve higher frame rates, as the CPU has the headroom to support it. The 6-core, 12-thread configuration is sufficient for modern games, and the Zen 3 architecture provides strong single-thread performance, which is crucial for game logic and physics. The CPU's 65W TDP also indicates it runs efficiently, but the data does not show any thermal throttling issues. Overall, the CPU is a solid foundation, but the GPU is the limiting factor in this specific benchmark.
Hardware Specifications
AMD Ryzen 5 5600F
Intel Arc B580
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5600F + Intel Arc B580 in Cyberpunk 2077
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 42.0 |
| 3840x2160 | Medium | 31.0 |
| 3840x2160 | High | 23.0 |
| 3840x2160 | Ultra | 22.0 |
| 2560x1440 | Low | 64.0 |
| 2560x1440 | Medium | 47.0 |
| 2560x1440 | High | 35.0 |
| 2560x1440 | Ultra | 33.0 |
| 1920x1080 | Low | 86.0 |
| 1920x1080 | Medium | 63.0 |
| 1920x1080 | High | 47.0 |
| 1920x1080 | Ultra | 44.0 |
Cyberpunk 2077 with Ryzen 5 5600F + Other GPUs
See how Cyberpunk 2077 performs with the same CPU but different graphics cards.
Cyberpunk 2077 with Arc B580 + Other CPUs
See how Cyberpunk 2077 performs with the same GPU but different processors.
Other Games with Ryzen 5 5600F + Arc B580
Explore FPS benchmarks for other games using this same hardware combination.