Archeage

The AMD Ryzen 7 5800X3D and Intel Arc B570 combination ranks 2,222nd out of 2,761 tested combos in Archeage, placing it in the lower portion of the database. This percentile position is noteworthy given the hardware involved: the CPU sits at the 80th percentile among all processors, while the GPU is at the 65th percentile among all graphics cards. The ranking suggests that Archeage's specific workload characteristics do not favor this pairing as much as raw benchmark scores might imply, and the data indicates that the GPU is the primary constraint in most scenarios. This is a combo that can handle the game at 1080p and 1440p with adjusted settings, but it struggles at 4K, and the measured results provide a clear picture of where its limits lie.

How This Combo Ranks

The combo's rank of 2,222 out of 2,761 tested combinations places it in the 19.5th percentile of all tested systems in Archeage. This is a surprisingly low position when considering the individual component strengths. The Ryzen 7 5800X3D, with its 8 cores and 16 threads, achieves an average benchmark score of 27,896, placing it at the 80th percentile of all CPUs. The Arc B570, with an average benchmark score of 20,556, sits at the 65th percentile of all GPUs. When these two components are combined in Archeage, the resulting performance does not scale proportionally to their standalone capabilities.

The data shows a clear bottleneck pattern. At 1080p Low, the system achieves 110 FPS, which is respectable, but at 1440p Low, it drops to 74 FPS, and at 4K Low, it falls to 42 FPS. This steep decline across resolutions indicates that the GPU is being overwhelmed as pixel count increases. The CPU is likely capable of more, but the Arc B570 cannot keep up with the demand. The rank reflects this imbalance. While the CPU is a strong performer, the GPU's limitations in this MMORPG drag the overall combo down. The measured FPS numbers suggest that this system is better suited for 1080p gaming in Archeage, where it can maintain playable framerates, rather than higher resolutions where it falls below acceptable thresholds.

GPU Role

The Intel Arc B570 brings 10 GB of GDDR6 memory on a 160-bit bus, providing 380.0 GB/s of bandwidth. Its base and boost clocks are both locked at 2500 MHz, and it features 2,304 shading units, 144 TMUs, and 80 ROPs. The GPU's architecture, Xe2-HPG, is built on a 5 nm process from TSMC, with 19,600 million transistors on a 272 mm² die. The memory clock runs at 2375 MHz, which translates to 19 Gbps effective.

In Archeage, the GPU's role is defining. The measured FPS data shows that at 4K Ultra, the combo manages only 17 FPS, while at 4K High it reaches 26 FPS, and at 4K Medium it hits 38 FPS. These numbers are all below playable thresholds for most users. The GPU's 10 GB of VRAM is sufficient for this game, as Archeage is not particularly VRAM-hungry, but the raw compute power of the B570 is insufficient for 4K. At 1440p, the situation improves, with High settings reaching 45 FPS and Medium hitting 66 FPS. The GPU's FP32 performance of 11.52 TFLOPS and its pixel rate of 200.0 GPixel/s are adequate for 1080p and moderate 1440p, but they are not enough for 4K. The data indicates that the Arc B570 is the limiting factor in this combo, particularly at higher resolutions. The GPU's average benchmark score of 20,556 puts it just 0.1% above the NVIDIA GeForce RTX 3070 Mobile, which scores 20,534, and 0.1% below the Intel Arc A750, which scores 20,582. This places it in a performance tier that is competitive at 1080p but falls short in more demanding scenarios.

Resolution Scaling

The FPS drops from 1080p to 4K are steep and tell a clear story about which component is the bottleneck. Starting at 1080p Low, the combo achieves 110 FPS. Moving to 1440p Low, the FPS drops to 74, a reduction of 32.7%. At 4K Low, the FPS falls to 42, which is a 61.8% drop from the 1080p Low result. This pattern is consistent across all settings. For High settings, the progression is 66 FPS at 1080p, 45 FPS at 1440p, and 26 FPS at 4K, representing a 31.8% drop from 1080p to 1440p and a 60.6% drop from 1080p to 4K.

This scaling behavior is characteristic of a GPU-bound system. A CPU-bound scenario would show smaller FPS differences between resolutions, as the CPU would be the limiting factor regardless of pixel count. Here, the FPS nearly halves when going from 1080p to 4K, indicating that the Arc B570 is working at its limits. The CPU, with its 8 cores and 16 threads, is likely not the primary constraint, as its 96 MB of L3 cache and high single-thread performance (3dmark single-thread score of 884) would be sufficient for Archeage's MMO workload. The data suggests that to improve performance at 1440p or 4K, a more powerful GPU would be needed, but with this Arc B570, the system is best utilized at 1080p, where it can deliver smooth framerates across all settings.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. On Low settings, it achieves an average of 110 FPS. Medium settings yield 98 FPS, with a minimum of 83 FPS and a maximum of 112 FPS. High settings produce 66 FPS, and Ultra settings drop to 45 FPS. These numbers show that 1080p is the sweet spot for this system. For competitive or fast-paced gameplay, Low or Medium settings provide the highest framerates, while High settings are still playable for most users. Ultra at 45 FPS is borderline, but it is acceptable for a slower-paced MMORPG.

Moving to 2560x1440, the performance drops significantly. Low settings average 74 FPS, Medium settings average 66 FPS with a range of 56 to 76 FPS, High settings average 45 FPS, and Ultra settings average 31 FPS. At this resolution, Low and Medium are the only settings that provide consistently smooth gameplay. High settings are playable but may feel less fluid during crowded scenes, and Ultra drops below 30 FPS, which is not recommended.

At 3840x2160, the system struggles. Low settings average 42 FPS, Medium settings average 38 FPS with a minimum of 32 FPS and a maximum of 43 FPS, High settings average 26 FPS, and Ultra settings average 17 FPS. None of these settings provide a satisfactory experience at 4K. Even Low settings dip close to the 40 FPS mark, and Medium can drop to 32 FPS, which will be noticeable in gameplay. The data is clear: this combo is not suited for 4K gaming in Archeage.

CPU Role

The AMD Ryzen 7 5800X3D is a Zen 3 architecture processor, codenamed Vermeer, built on a 7 nm process from TSMC. It has 8 cores and 16 threads, with a base clock of 3.40 GHz and a boost clock of 4.50 GHz. The CPU's defining feature is its 96 MB of shared L3 cache, which is far larger than typical processors in this class. This large cache is beneficial for gaming, as it reduces memory latency and improves data retrieval. The CPU supports DDR4 memory with a dual-channel bus, providing 51.2 GB/s of bandwidth. Its TDP is rated at 105 W, and it uses the AMD Socket AM4 platform.

In Archeage, the CPU's role is to handle the game's logic, AI, and network processing. The data suggests that the 5800X3D is up to the task. Its 3dmark scores show strong multi-threaded performance, with a 16-thread score of 7,299 and a max-thread score of 7,285. The single-thread score of 884 is also solid. The Cinebench R23 multicore score of 14,317 and single-core score of 1,452 confirm its capabilities. When comparing to its nearest rivals, the 5800X3D's average benchmark score of 27,896 is effectively tied with the AMD Ryzen 7 6800U (27,887, 0% delta) and the Intel Core i9-10900K (27,872, 0.1% delta), and it is 0.3% above the Intel Core i5-12600KF (27,799). This indicates that the CPU is not the bottleneck in this combo.

The evidence points to the GPU as the limiting factor. At 1080p Low, the system hits 110 FPS, which is a high framerate that suggests the CPU is feeding the GPU adequately. If the CPU were the bottleneck, the FPS would be lower and would not vary as much with resolution. The fact that FPS drops dramatically from 1080p to 4K confirms that the GPU is the constraint. The 5800X3D has enough headroom to push higher framerates if paired with a more powerful GPU.

Settings Recommendations

The measured FPS data provides a clear guide for optimal settings. At 1920x1080, the best experience is achieved on Medium settings, which deliver 98 FPS with a minimum of 83 FPS. This provides a smooth, responsive experience that is ideal for Archeage's MMORPG gameplay, where large groups of players can cause framerate dips. Low settings at 110 FPS are even smoother, but the visual quality is noticeably reduced. High settings at 66 FPS are playable, but the framerate may dip in crowded areas, making Medium the better balance of visual fidelity and performance. Ultra settings at 45 FPS are not recommended for this resolution, as the visual improvement is not worth the significant framerate loss.

At 2560x1440, Medium settings are again the best choice. The 66 FPS average, with a minimum of 56 FPS, provides a consistent experience that remains above 55 FPS even in demanding scenes. Low settings at 74 FPS offer a slightly higher framerate but with reduced visual quality. High settings at 45 FPS are playable but may feel less fluid, and Ultra settings at 31 FPS are too low for a comfortable experience. For users with 1440p monitors, Medium is the recommended preset, as it maintains a playable framerate while preserving decent visual detail.

At 3840x2160, no settings are recommended. Even Low settings at 42 FPS are borderline, and Medium at 38 FPS with a minimum of 32 FPS will be noticeable during intense gameplay. High and Ultra settings, at 26 FPS and 17 FPS respectively, are unplayable. Users with 4K displays should consider lowering the resolution to 1440p for this game, as the system cannot deliver a satisfactory experience at 4K with this GPU.

In summary, the AMD Ryzen 7 5800X3D and Intel Arc B570 combo is best suited for 1080p gaming in Archeage. The CPU is more than capable, but the GPU's limitations become apparent at higher resolutions. For the best experience, run the game at 1080p with Medium settings, or at 1440p with Medium settings if you can tolerate slightly lower framerates. Avoid 4K entirely, as the data shows it is not viable with this hardware configuration.