Archeage

The AMD Ryzen 5 5600GT and Intel Arc B570 combination lands near the bottom of the performance hierarchy for Archeage, securing the 2222nd position out of 2761 tested combos. This places the pairing in the bottom 20% of all configurations, a result that reflects the game's demanding engine and the specific strengths of these components. While the hardware is not obsolete, the data shows it is not optimized for achieving high frame rates in this MMORPG, particularly at higher resolutions and quality settings.

How This Combo Ranks

With a rank of 2222 out of 2761 combos, this system is positioned in the lower quartile of tested hardware for Archeage. The data indicates that while the combo is playable, it does not deliver the high-refresh-rate experience many players seek. The ranking suggests that the CPU and GPU combination is a significant bottleneck for this title, which is likely due to Archeage’s heavy reliance on single-threaded performance and its complex draw calls that can stress a mid-range GPU.

The individual components do not fare much better in their respective peer groups. The Ryzen 5 5600GT sits at the 74th percentile among all CPUs, which is a respectable score, but its nearest rivals show how tight the competition is. The Intel Core i5-12490F trails it by only 0.3%, while the Intel Xeon 6325P and Core Ultra 5 125U are also within 0.4% of its average benchmark score. This shows the CPU is competitive, but it is not a clear winner, and in a game like Archeage that may not use all 12 threads effectively, that small margin can be the difference between smooth and stuttery gameplay.

Similarly, the Intel Arc B570 holds the 65th percentile among all GPUs. Its closest rival, the NVIDIA GeForce RTX 3070 Mobile, is a mere 0.1% ahead, while the Intel Arc A750 is 0.1% behind. This indicates the GPU is a solid mid-range performer, but the measured FPS in Archeage suggests that the game’s engine does not fully utilize the Arc B570’s architectural strengths. The combo’s low ranking is therefore not a result of one weak component, but rather a synergy issue where the hardware’s theoretical capabilities do not translate into practical frame rates for this specific title.

CPU Role

The AMD Ryzen 5 5600GT is a 6-core, 12-thread processor based on the Zen 3 architecture, running on the AM4 socket. It has a base clock of 3.60 GHz and a boost clock of 4.60 GHz, which are the figures that dictate its responsiveness in single-threaded workloads. In Archeage, which is an older MMORPG, the game logic and client-side processing often rely on a few fast cores rather than scaling perfectly across many. The CPU's 3DMark single-thread score of 913 and Cinebench R23 single-core score of 2438 indicate a capable single-thread performer, but the game's engine may not be hitting those boost clocks consistently in all scenarios.

The processor’s 16 MB of L3 cache and dual-channel DDR4 memory support are adequate for gaming, but the fact that it is a 7 nm chip with a 65W TDP suggests it is not a high-power, high-frequency monster. The benchmark results show a strong multi-threaded capability, with a Cinebench R23 multicore score of 17272, but the question is how much of that is used. The PassMark multithread score of 20325 is high, but Archeage’s performance is often constrained by the primary thread. The data suggests that while the CPU can handle complex calculations, its inability to drastically outperform its immediate rivals means it is not providing a massive advantage in a game that is not perfectly optimized for many cores.

The CPU’s integrated Radeon Vega 7 graphics are irrelevant when paired with the discrete Arc B570, but the presence of this iGPU does not impact the gaming results. The data shows that the CPU is not the primary bottleneck at lower resolutions, but it becomes a limiting factor as the resolution and settings increase, preventing the GPU from reaching its full potential. For this combo, the CPU is a solid foundation, but its performance in this game is merely adequate, not exceptional.

FAQ

Q: Is the AMD Ryzen 5 5600GT + Intel Arc B570 combo capable of running Archeage at 60 FPS?

A: Based on the measured FPS, this combo only exceeds 60 FPS at 1080p with Low settings (110 FPS) and Medium settings (98 FPS). At 1440p, it only breaks 60 FPS on Low (74 FPS), and at 4K, it never reaches 60 FPS, with the highest average being 42 FPS on Low settings.

Q: What is the best resolution to play Archeage with this hardware for a smooth experience?

A: The data shows that 1080p is the only resolution where the combo can maintain a comfortable 60+ FPS on Medium settings (98 FPS) or High settings (66 FPS). At 1440p, only Low settings (74 FPS) achieve that, while 4K is not recommended for smooth play.

Q: How does this combo compare to its closest rivals in terms of CPU and GPU performance?

A: The CPU is 0.3% behind the Intel Core i5-12490F and 0.4% behind the Intel Xeon 6325P in average benchmark score. The GPU is 0.1% ahead of the Intel Arc A750 and 0.1% behind the NVIDIA GeForce RTX 3070 Mobile, showing that the hardware is competitive with its peers.

Q: Does the Intel Arc B570 perform better in Archeage than its direct predecessor?

A: The data provided does not include direct performance comparisons against the Intel Arc A750 in Archeage. However, the average benchmark scores show the B570 is 0.1% ahead, but the actual FPS in this game may differ due to driver optimizations and engine quirks.

Q: Is the CPU or GPU the limiting factor for this combo in Archeage?

A: The data implies a balanced bottleneck. At 1080p Medium, the FPS drops from 110 to 98 when moving from Low to Medium, indicating the GPU is being utilized. However, the 66 FPS at High settings suggests the CPU is also struggling, as the GPU has headroom to produce more frames but is being held back. At 4K, the GPU is clearly the limiting factor, with FPS dropping to 26 on High.

Q: What are the key specs of the Intel Arc B570 that affect its gaming performance?

A: The Intel Arc B570 features 2304 shading units, 144 TMUs, and 80 ROPs, with a boost clock of 2500 MHz. It has 10 GB of GDDR6 memory on a 160-bit bus, providing a bandwidth of 380.0 GB/s. These specs place it in the mid-range category, but its performance in Archeage is lower than expected based on its PassMark G3D score of 14195.

Measured FPS Breakdown

The measured FPS data reveals a clear hierarchy across resolutions and settings. At 1080p, the combo shows its best performance. With Low settings, the average FPS is 110, which is a very playable frame rate. Moving to Medium settings drops the average to 98 FPS, with a minimum of 83 and a maximum of 112, indicating a stable experience for most users. High settings reduce the average to 66 FPS, which is still acceptable for many, but the jump to Ultra is severe, falling to an average of just 45 FPS.

At 1440p, the performance takes a noticeable hit. Low settings yield an average of 74 FPS, which is still smooth. Medium settings drop to 66 FPS, with a range of 56 to 76 FPS, which can feel inconsistent. High settings average 45 FPS, which is below the ideal threshold for fast-paced action, and Ultra plummets to 31 FPS, making it playable but not enjoyable for extended sessions.

At 4K, the combo struggles significantly. Low settings produce an average of 42 FPS, which is borderline playable. Medium settings average 38 FPS, with a minimum of 32 and a maximum of 43, showing a tight but low range. High settings drop to 26 FPS, which is quite laggy, and Ultra settings are nearly unplayable at just 17 FPS. The data clearly shows that this hardware is not designed for 4K gaming in Archeage.

Resolution Scaling

The frame rate scaling from 1080p to 4K highlights the nature of the bottleneck. At High settings, the average FPS drops from 66 at 1080p to 45 at 1440p, a reduction of 21 FPS, and then to 26 at 4K, a further drop of 19 FPS. This is a significant scaling curve that indicates the GPU is the primary limiting factor at higher resolutions. The Arc B570’s 10 GB of memory and 380 GB/s bandwidth are insufficient to handle the increased pixel count and texture loads at 4K, leading to a sharp performance decline.

However, at Low settings, the scaling is different. The average FPS drops from 110 at 1080p to 74 at 1440p, a loss of 36 FPS, and then to 42 at 4K, a loss of 32 FPS. This shows that even at low graphical loads, the GPU is still the main constraint, as the CPU is able to keep up with the reduced demand. The fact that the FPS does not double when the resolution is halved confirms that the GPU is not the only bottleneck. At 1080p Low, the CPU must work harder to feed the GPU, but at 4K, the GPU is overwhelmed.

The data suggests that at 1080p, the system is relatively balanced, with the CPU and GPU sharing the load. As the resolution increases, the GPU becomes the clear bottleneck, particularly at High and Ultra settings. The CPU’s 6 cores and 12 threads are sufficient to maintain a steady frame rate at lower resolutions, but they cannot compensate for the GPU’s lack of raw pixel-pushing power at 4K. This scaling behavior is typical for a mid-range GPU paired with a mid-range CPU, but the severity of the drop at 4K indicates that the Arc B570 is not well-suited for this game at that resolution.

Settings Recommendations

Based on the measured FPS data, the optimal experience for this combo is at 1080p with Medium settings. This configuration yields an average of 98 FPS, with a minimum of 83 and a maximum of 112, providing a smooth and consistent frame rate that is suitable for most gameplay scenarios. This is the sweet spot, as it offers a significant visual improvement over Low settings while maintaining a high level of responsiveness.

For players who prioritize frame rate over visual fidelity, 1080p Low is the best choice, delivering an average of 110 FPS. This is the only setting that consistently exceeds 100 FPS, which is beneficial for competitive play. However, the visual downgrade may be noticeable. If you prefer higher visual quality, 1080p High is a viable option with an average of 66 FPS, but be prepared for occasional dips below that mark.

At 1440p, the only recommended setting is Low, which averages 74 FPS. This provides a good balance of resolution and performance, but higher settings will result in a sub-60 FPS experience. Medium settings (66 FPS) are borderline, but the frame dips to 56 FPS can cause stuttering in crowded areas. 4K is not recommended for this combo, as even the lowest settings only achieve 42 FPS, which is not smooth enough for a responsive MMORPG experience. For the best overall experience, stick to 1080p Medium. For the highest possible frame rate, use 1080p Low. Avoid Ultra settings at all resolutions, as the performance penalty is severe, with 1080p dropping to 45 FPS and 4K to just 17 FPS.