Archeage

The AMD Ryzen 5 4600G paired with the Intel Arc B580 lands in the lower-middle tier of tested combinations for Archeage. With a combo rank of 2797 out of 3708 tested setups, this pairing places in the 25th percentile of all combos, meaning roughly three-quarters of tested systems deliver higher average frame rates. This is not a top-tier configuration for the game, but the data shows it remains functional for playable sessions at specific settings, particularly at 1080p and 1440p where the GPU can stretch its legs. The combination's standing reflects a CPU that is solidly mid-pack for its generation but a GPU that, while capable, is held back by the processor's Zen 2 architecture in this MMO's engine.

How This Combo Ranks

The combo finishes at rank 2797 out of 3708 tested combinations, a position that puts it in the 75th percentile from the bottom. This is a modest result, suggesting that while the hardware is far from obsolete, it does not excel in Archeage's specific workload. The CPU's percentileVsAllCpus is 71, indicating it outperforms 71% of all processors in general benchmarks, yet the combo rank is lower, which points to the game's sensitivity to other factors like memory bandwidth and single-thread performance rather than raw core count. The GPU's percentileVsAllGpus is 68, slightly worse than the CPU's standing, but the bottleneck in this pairing is clearly the processor.

Benchmark results indicate the Ryzen 5 4600G's multi-threaded performance is competitive with its immediate rivals, as the data shows it sits within 0.8% of the Intel Core i3-14100T and 0.6% of the AMD Ryzen 3 8300GE in average benchmark scores. However, Archeage's engine does not scale perfectly with thread count, and the CPU's single-thread score of 726 in 3dmark_single_thread is a more telling metric for this genre. The combo's rank suggests that players will see playable frame rates at lower resolutions, but the system will struggle to maintain high refresh rates or max settings at higher resolutions.

GPU Role

The Intel Arc B580 brings 12 GB of GDDR6 memory on a 192-bit bus, delivering 456.0 GB/s of bandwidth. This memory configuration is ample for Archeage, which is a 2014 title without extreme VRAM demands, so the 12 GB capacity is never a limiting factor in the measured results. The GPU's clocks are locked at 2670 MHz for both base and boost, which is a modest speed for a modern card, but the architecture's efficiency compensates. The 2560 shading units and 80 ROPs provide the raw throughput needed to push pixels, and the 13.67 TFLOPS FP32 performance is respectable for this game's era.

The data shows the GPU's performance in this pairing is heavily influenced by resolution. At 3840x2160 with Ultra settings, the average FPS drops to 20, which is unplayable, while at 1920x1080 with Low settings, it reaches 124 FPS. This indicates that the B580 is capable of high frame rates when the CPU keeps up, but the bottleneck shifts to the processor at 4K. The GPU's nearestRivals include the NVIDIA GeForce RTX 2080 and RTX 3080, with deltaPct values of 0.6% and -0.7% respectively, showing the B580 performs on par with those older high-end cards in synthetic tests. However, in Archeage, the measured FPS suggests the GPU is not the primary constraint until you push to 4K Ultra, where the 20 FPS result signals a hard limit for this combo.

FAQ

Q: Is this combo capable of running Archeage at 60 FPS?

A: Yes, but only at 1920x1080 resolution. The data shows 124 FPS at Low settings, 111 FPS at Medium, and 75 FPS at High, all exceeding 60 FPS. At 2560x1440, only Low settings (84 FPS) break the 60 FPS barrier, while Medium (75 FPS) and High (51 FPS) fall short or barely miss.

Q: How does the CPU affect performance in Archeage compared to the GPU?

A: The CPU appears to be the limiting factor at lower resolutions. At 1920x1080, dropping from High to Low settings increases FPS from 75 to 124, a 65% improvement, which suggests the GPU is not saturated. The CPU's 3dmark_single_thread score of 726 is low relative to its multi-thread scores, and Archeage's MMO engine likely relies on single-thread performance, making the 4600G the bottleneck.

Q: What is the best resolution for this combo?

A: The measured data indicates 1920x1080 is the sweet spot. All settings except Ultra (51 FPS) deliver above 60 FPS, with Medium providing 111 FPS and High at 75 FPS. At 2560x1440, only Low (84 FPS) and Medium (75 FPS) are playable, while 3840x2160 is only viable at Low (48 FPS) or Medium (43 FPS).

Q: How does the Arc B580 compare to its closest rivals in synthetic benchmarks?

A: The B580's average benchmark score of 23021 is nearly identical to the AMD Radeon RX 580 2048SP (23061, deltaPct -0.2%) and slightly ahead of the NVIDIA GeForce RTX 2080 (22895, deltaPct 0.6%). It trails the RTX 3080 by a small margin (23172, deltaPct -0.7%). This indicates the B580 performs at the level of a high-end previous-generation card.

Q: Does the CPU's 6-core/12-thread configuration help in Archeage?

A: The 4600G's 6 cores and 12 threads are sufficient for the game, as evidenced by the 1080p results, but they are not a strength. The 3dmark_16_threads score of 4863 and 3dmark_8_threads score of 4138 show moderate scaling, but Archeage's engine does not appear to use all threads effectively, as single-thread performance (726 in 3dmark_single_thread) is more correlated with the FPS drops at higher resolutions.

Q: What settings should be avoided with this combo?

A: Ultra settings are not recommended. At 1920x1080, Ultra yields 51 FPS, which is below the 60 FPS threshold. At 2560x1440, Ultra drops to 35 FPS, and at 3840x2160, it falls to 20 FPS. These results indicate that Ultra settings overtax the system, likely due to the CPU's inability to handle the increased draw calls and physics calculations.

Measured FPS Breakdown

The measured FPS data provides a clear picture of how this combo scales across resolutions and settings. Starting at 3840x2160, the system delivers 29 FPS at High, 48 FPS at Low, 43 FPS at Medium (with a min of 36 and max of 49), and 20 FPS at Ultra. These numbers show that 4K is only marginally playable at Low settings, and the jump from Low to High represents a 39% performance drop, indicating the GPU is becoming a limiting factor at this resolution but the CPU also struggles with the higher settings' overhead.

Moving to 2560x1440, the performance improves significantly. Low settings deliver 84 FPS, Medium provides 75 FPS (min 63, max 86), High comes in at 51 FPS, and Ultra drops to 35 FPS. The transition from Low to Medium is a 10.7% decrease, while Low to High is a 39.3% decrease. This suggests that the GPU has headroom at 1440p, but the CPU's single-thread limitations start to show at High settings, where the frame rate falls below the 60 FPS target. The min FPS of 63 at Medium confirms that even with dips, the experience remains smooth for most players.

At 1920x1080, the combo shows its best results. Low settings achieve 124 FPS, Medium reaches 111 FPS (min 94, max 127), High provides 75 FPS, and Ultra yields 51 FPS. The gap between Low and Medium is only 10.5%, but the jump from Medium to High is a 32.4% drop, and High to Ultra is another 32% drop. This pattern points to the CPU becoming the primary bottleneck as settings increase, since the GPU has enough power to render the scene but the processor cannot feed it data fast enough at higher detail levels.

CPU Role

The AMD Ryzen 5 4600G is a 6-core, 12-thread processor based on the Zen 2 architecture, with a base clock of 3.70 GHz and a boost clock of 4.20 GHz. It features 8 MB of shared L3 cache and supports DDR4 memory with a dual-channel bus, providing 51.2 GB/s of bandwidth. The CPU's benchmark scores show a typical Zen 2 profile: strong multi-threaded performance (13593 in Cinebench R23 multicore) but weaker single-thread results (1919 in Cinebench R23 singlecore). This asymmetry is critical for Archeage, which is an MMO that often relies on a few heavily-loaded threads for game logic and physics.

The CPU's percentileVsAllCpus of 71 indicates it is above average, but its nearestRivals in the database—AMD Ryzen 3 PRO 5355GE (deltaPct 0.1%), AMD Ryzen 3 8300GE (deltaPct -0.6%), Intel Core 7 150U (deltaPct 0.6%), and Intel Core i3-14100T (deltaPct -0.8%)—all show that the 4600G is not a standout performer. In Archeage, the data suggests the CPU is the limiting factor at 1080p High settings and above, as the FPS drops from 75 at High to 51 at Ultra, a 32% reduction that cannot be attributed to GPU load alone. The CPU's 3dmark_2_threads score of 1430 is particularly relevant, as it shows the processor's ability to handle lightly-threaded workloads, which is typical for MMO game servers and client-side logic.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the player's resolution and preference for frame rate versus visual fidelity. At 1920x1080, Medium settings are the clear recommendation, delivering 111 FPS with a minimum of 94 FPS, ensuring smooth gameplay in crowded areas. High settings at 75 FPS are also viable for players who want improved visuals, but the 32% performance drop from Medium suggests that the CPU is straining, and frame dips could become noticeable in large-scale battles.

For 2560x1440, Medium settings (75 FPS, min 63) offer the best balance, as they stay above the 60 FPS threshold while providing decent visuals. Low settings (84 FPS) are an option for competitive play, but the visual quality trade-off is substantial. High settings (51 FPS) are playable but not ideal for fast-paced action, and Ultra (35 FPS) should be avoided. At 3840x2160, the data shows that only Low settings (48 FPS) are marginally playable, but the experience will be suboptimal; Medium (43 FPS) and High (29 FPS) are too choppy for a smooth experience, and Ultra (20 FPS) is unplayable. The recommendation is to stick with 1080p Medium or 1440p Medium for the best experience, as these settings leverage the GPU's capabilities without overwhelming the CPU.