Archeage
This combination provides smooth gameplay with an average of 96 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 31 | 48 | 66 | 79 |
| 1440p QHD | 53 | 80 | 119 | 137 |
| 1080p Full HD | 79 | 121 | 170 | 174 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 5 4600G + AMD Radeon RX 9070, In-Depth Analysis
The AMD Ryzen 5 4600G paired with the AMD Radeon RX 9070 presents a notable asymmetry in Archeage: a strong modern GPU constrained by an older mid-range CPU. The measured frame rates across resolutions and presets reveal a configuration that is heavily dependent on graphical settings to achieve its best experience. The data indicates that this combo performs best at Medium settings, offering a balance between visual fidelity and playable performance that is not achievable at higher presets.
Settings Recommendations
The benchmark data shows a clear and consistent pattern: the Ultra preset is largely unusable on this hardware. At 1920x1080, Ultra yields an average of 79.4 FPS, while Medium and High reach 169.9 and 120.6 FPS respectively. The gap widens dramatically at higher resolutions, with Ultra dropping to 52.7 FPS at 2560x1440 and 31.2 FPS at 3840x2160. The data suggests that the Ultra preset imposes a rendering load that the Ryzen 5 4600G cannot feed adequately, creating a bottleneck that cripples the RX 9070.
The optimal experience is found at Medium settings. At 1920x1080, Medium achieves 169.9 FPS, which is marginally below the Low preset’s 174.3 FPS but provides substantially better visual quality. The advantage of Medium becomes more pronounced at higher resolutions. At 2560x1440, Medium maintains 118.5 FPS, a significant 39.5% improvement over High’s 79.8 FPS. At 3840x2160, Medium still delivers a playable 65.6 FPS, whereas High falls to 48.4 FPS. The Low preset, while offering the highest frame rates at every resolution (174.3, 136.6, and 78.8 FPS), does so at the cost of visual clarity that is likely unnecessary given the headroom.
For users prioritizing smooth gameplay, the High preset at 1920x1080 is viable at 120.6 FPS. However, the data indicates that High is a poor choice for 2560x1440 and 3840x2160, as the performance penalty relative to Medium is steep. The measured results strongly suggest that Medium is the sweet spot, providing 169.9 FPS at 1080p, 118.5 FPS at 1440p, and 65.6 FPS at 4K. This preset allows the RX 9070 to operate efficiently while keeping the CPU from becoming the limiting factor. The Ultra preset should be avoided entirely, as its 31.2 FPS at 4K and 52.7 FPS at 1440p fall below acceptable thresholds for an MMORPG.
GPU Role
The AMD Radeon RX 9070 is a high-end graphics card with 16 GB of GDDR6 memory on a 256-bit bus, providing a memory bandwidth of 644.6 GB/s. The card’s boost clock is rated at 2520 MHz, with a game clock of 2070 MHz. The GPU sits in the 79th percentile of all GPUs, indicating strong overall performance. Its average benchmark score is 34780, placing it slightly ahead of the NVIDIA Quadro GV100 (34677) and behind the NVIDIA A2 (34866) by a 0.2% margin.
In Archeage, the GPU’s role is heavily dependent on the preset. The data shows that at Low settings, the RX 9070 is not the bottleneck at any resolution. The frame rates of 174.3 FPS at 1080p and 136.6 FPS at 1440p are high, but the scaling from 1440p to 4K (a drop from 136.6 to 78.8 FPS) suggests the CPU is still limiting the GPU’s output. At Medium settings, the GPU is more engaged, as evidenced by the 169.9 FPS at 1080p and the more substantial drop to 118.5 FPS at 1440p. The 4K result of 65.6 FPS indicates that the RX 9070 is now doing more work, but the CPU still prevents it from reaching its full potential.
The Ultra preset reveals the true nature of the pairing. The drop from Medium to Ultra is severe: 169.9 to 79.4 FPS at 1080p, 118.5 to 52.7 FPS at 1440p, and 65.6 to 31.2 FPS at 4K. This halving of performance suggests that the Ultra preset introduces a CPU-bound workload component that the Ryzen 5 4600G cannot handle. The RX 9070’s 16 GB VRAM is ample for any preset, but the card’s capabilities are masked by the system’s processing bottleneck. The GPU’s high compute power, as indicated by its 36.13 TFLOPS FP32 throughput, is underutilized in this configuration.
Resolution Scaling
The frame rate scaling across resolutions provides clear evidence of a CPU limitation. At 1920x1080, the Low preset achieves 174.3 FPS. Moving to 2560x1440 reduces this to 136.6 FPS, a 21.6% drop. Further moving to 3840x2160 results in 78.8 FPS, a 42.3% drop from the 1440p figure. While these drops are expected, they are less severe than what a purely GPU-bound scenario would produce, indicating that the Ryzen 5 4600G is already near its limit at 1080p.
The Medium preset shows a similar pattern but with a more pronounced drop at 4K. From 169.9 FPS at 1080p, the framerate falls to 118.5 FPS at 1440p (a 30.3% reduction) and then to 65.6 FPS at 4K (a 44.6% reduction). The increasing percentage drops as resolution increases suggest that the GPU is becoming more of a factor, but the CPU still holds the system back from achieving the frame rates the RX 9070 could otherwise deliver.
The High preset tells a different story. At 1080p, it achieves 120.6 FPS. At 1440p, it drops to 79.8 FPS, a 33.8% reduction. At 4K, it falls to 48.4 FPS, a 39.3% reduction from 1440p. The Ultra preset exhibits the worst scaling, with a 33.6% drop from 1080p to 1440p (79.4 to 52.7 FPS) and a 40.8% drop from 1440p to 4K (52.7 to 31.2 FPS). This data indicates that the limiting component shifts from the CPU at low resolutions to the GPU at higher resolutions, but the CPU’s weakness at handling higher presets is the primary constraint on overall performance.
How This Combo Ranks
The AMD Ryzen 5 4600G and AMD Radeon RX 9070 combination ranks 612th out of 1727 tested combos in Archeage. This places it in the 35th percentile of all tested configurations, which is a modest result given the GPU’s high benchmark percentile of 79. The CPU’s percentile is 75, which is respectable, but the pairing does not translate to top-tier gaming performance in this specific title.
The disparity between the component’s individual benchmark scores and the in-game ranking highlights the importance of balanced pairing. The Ryzen 5 4600G’s average benchmark score of 17489 is nearly identical to its closest rival, the AMD Ryzen 3 PRO 5355GE (17482), and it trails the Intel Core i3-13100F (17665) by 1%. This CPU performance is adequate for general tasks, but in Archeage, the measured frame rates suggest that the 6-core, 12-thread processor with a 3.70 GHz base clock and 4.20 GHz boost clock is insufficient to keep pace with the RX 9070’s capabilities at higher settings.
The ranking of 612 out of 1727 indicates that the majority of tested combos outperform this pairing. This is not a reflection of the GPU’s quality but rather the CPU’s inability to leverage it. The data shows that the RX 9070 is severely underutilized, particularly at lower resolutions and presets where the CPU limits the frame rate. Users seeking better performance from this GPU would need a more powerful processor, but within this combo, the measured FPS values represent the system’s ceiling.
FAQ
Q: What is the highest average FPS this combo achieves at 1080p?
A: The highest average FPS at 1920x1080 is 174.3, achieved with the Low preset. The Medium preset is close behind at 169.9 FPS.
Q: Is the Ultra preset playable at 1440p?
A: The Ultra preset at 2560x1440 averages 52.7 FPS. This is lower than the High preset at 4K (48.4 FPS) and is likely to feel stuttery in an MMORPG environment.
Q: How does the CPU's benchmark score compare to its closest rival?
A: The Ryzen 5 4600G has an average benchmark score of 17489, which is virtually identical to the AMD Ryzen 3 PRO 5355GE’s score of 17482 (a 0% delta). It trails the Intel Core i3-13100F by 1%.
Q: What is the frame rate drop from 1080p to 4K on the Medium preset?
A: The Medium preset drops from 169.9 FPS at 1920x1080 to 65.6 FPS at 3840x2160, representing a 61.4% reduction in average frame rate.
Q: Does the GPU’s memory bandwidth contribute to the bottleneck?
A: The RX 9070 has a memory bandwidth of 644.6 GB/s and 16 GB of VRAM, which are more than sufficient for Archeage. The performance limitation is not due to memory capacity or bandwidth but rather the CPU’s processing power.
Q: What percentage of all GPUs does the RX 9070 outperform?
A: The RX 9070 is in the 79th percentile of all GPUs, meaning it performs better than 79% of GPUs in the benchmark database. Its average score is 34780.
Hardware Specifications
AMD Ryzen 5 4600G
AMD Radeon RX 9070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 4600G + AMD Radeon RX 9070 in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 78.8 |
| 3840x2160 | Medium | 65.6 |
| 3840x2160 | High | 48.4 |
| 3840x2160 | Ultra | 31.2 |
| 2560x1440 | Low | 136.6 |
| 2560x1440 | Medium | 118.5 |
| 2560x1440 | High | 79.8 |
| 2560x1440 | Ultra | 52.7 |
| 1920x1080 | Low | 174.3 |
| 1920x1080 | Medium | 169.9 |
| 1920x1080 | High | 120.6 |
| 1920x1080 | Ultra | 79.4 |
Archeage with Ryzen 5 4600G + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RX 9070 + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 5 4600G + RX 9070
Explore FPS benchmarks for other games using this same hardware combination.