The Technomancer
This combination may struggle with this title, averaging 27 FPS. Consider upgrading hardware or significantly lowering settings.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 12 | 16 | 14 | 17 |
| 1440p QHD | 18 | 24 | 26 | 35 |
| 1080p Full HD | 26 | 38 | 44 | 58 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
The Technomancer with AMD Ryzen 5 7500F + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis
The AMD Ryzen 5 7500F and NVIDIA GeForce GTX 1050 Ti combination produces a narrow range of frame rates in The Technomancer, with the data showing a hard ceiling imposed by the GPU. The pairing ranks 1635th out of 1656 tested combos for this title, placing it in the bottom 1.3% of systems. The following analysis breaks down the measured results, component roles, and settings behavior using only the benchmark database figures.
FAQ
Q: What is the best average frame rate this combo achieves at 1920x1080?
A: The highest measured average at 1920x1080 is 58.2 FPS, which occurs with Low settings. This is the only setting at this resolution that approaches a 60 FPS target, with Medium dropping to 43.9 FPS and High falling to 37.8 FPS.
Q: How does the combo perform at 2560x1440 compared to 1920x1080?
A: At 2560x1440, the maximum average FPS is 35.4 on Low settings, which is 39% lower than the 58.2 FPS seen at 1920x1080 Low. The gap narrows at higher settings: 2560x1440 High delivers 23.9 FPS versus 37.8 FPS at 1080p High, a 37% reduction.
Q: Is 3840x2160 playable with this hardware?
A: No. All measured averages at 3840x2160 fall between 12.4 FPS (Ultra) and 16.6 FPS (Low). These figures are below minimum playability thresholds, indicating the GPU lacks the fill rate for 4K rendering in this game.
Q: Which setting provides the largest performance jump from Ultra?
A: At 1920x1080, moving from Ultra (26 FPS) to Low (58.2 FPS) yields a 124% increase in average frame rate. The jump from Ultra to Medium (43.9 FPS) provides a 69% improvement, making Low the most significant step.
Q: How does the GTX 1050 Ti rank among all GPUs in the database?
A: The GPU sits at the 30th percentile of all GPUs, with an average benchmark score of 5316. Its nearest rivals include the NVIDIA GeForce 930A (score 5317, delta 0%) and the AMD Radeon R7 240 (score 5280, delta 0.7%).
Q: What is the CPU's benchmark standing relative to its peers?
A: The Ryzen 5 7500F ranks at the 82nd percentile of all CPUs, with an average benchmark score of 24993. It is within 0.4% of the AMD Ryzen 9 6900HX (score 24897) and 0.3% behind the AMD Ryzen 7 2700X (score 25057).
GPU Role
The GTX 1050 Ti is the primary bottleneck in this combination. Its 4 GB GDDR5 memory on a 128-bit bus provides 112.1 GB/s of bandwidth, and the GPU operates at a base clock of 1291 MHz with a boost of 1392 MHz. The Pascal architecture chip contains 768 shading units, 48 TMUs, and 32 ROPs, yielding a pixel rate of 44.54 GPixel/s and a texture rate of 66.82 GTexel/s.
These specifications translate directly into the measured frame rates. At 3840x2160, the GPU cannot maintain playable performance regardless of settings, with averages ranging from 12.4 FPS (Ultra) to 16.6 FPS (Low). The narrow spread of only 4.2 FPS between Ultra and Low at 4K indicates the GPU is completely saturated even at minimal graphical load. The situation improves at 2560x1440, where Low settings reach 35.4 FPS, but Ultra still drops to 18 FPS. At 1920x1080, the GPU finally shows headroom: Low hits 58.2 FPS, while Ultra manages 26 FPS. The 32.2 FPS difference between these settings at 1080p reveals that the Pascal chip has enough compute headroom to respond to graphical scaling, but the 2.138 TFLOPS FP32 throughput caps overall performance.
The GPU's 30th percentile ranking among all GPUs, with an average score of 5316, aligns with these game results. Its nearest rival, the NVIDIA GeForce 930A, scores 5317 with a 0% delta, indicating near-identical compute capability. The 0.4% advantage over the GeForce 940M (score 5297) is negligible in real-world terms. For The Technomancer, the data shows that the GTX 1050 Ti's 4 GB frame buffer is adequate for 1080p and 1440p, but the 112.1 GB/s bandwidth and 44.54 GPixel/s fill rate are insufficient for 4K.
CPU Role
The AMD Ryzen 5 7500F provides substantial processing headroom that the GTX 1050 Ti cannot fully utilize in this game. The 6-core, 12-thread Zen 4 Raphael chip runs at a base clock of 3.70 GHz and boosts to 5.00 GHz, with 32 MB of shared L3 cache. Its benchmark results demonstrate strong multi-threaded capability: Cinebench R23 multicore scores 22799, while the single-core score is 3218, and Geekbench multicore reaches 12686 with a single-core score of 2759.
The CPU's 82nd percentile ranking, with an average benchmark score of 24993, places it far above the GPU's 30th percentile. This disparity is evident in the measured FPS data. At 1920x1080 with Low settings, the combo achieves 58.2 FPS, which is close to a typical 60 FPS cap. However, the fact that Ultra settings drop to 26 FPS — a 55% reduction — while the CPU maintains identical processing power across all settings indicates the GPU, not the CPU, is the limiting factor. The Ryzen 5 7500F's nearest rivals include the Intel Core i7-11850H (score 24974, delta 0.1%) and the AMD Ryzen 5 8400F (score 25064, delta -0.3%), all within a 0.4% band. This tight clustering suggests the CPU delivers consistent performance that would not bottleneck a more powerful GPU in this title.
The 65 W TDP and 5 nm process node contribute to the CPU's efficiency, but these attributes do not directly influence The Technomancer's frame rates. What matters is that the 7500F's single-thread performance (Cinebench R20 single-core score of 1351) and multi-thread throughput (Cinebench R20 multicore score of 9575) far exceed what the GTX 1050 Ti can render. In every measured resolution, the frame rate scales with graphical settings, not CPU load, confirming the GPU as the definitive performance ceiling.
How This Combo Ranks
The combination ranks 1635th out of 1656 tested combos in The Technomancer, placing it in the bottom 1.3% of all systems. This rank reflects the severe GPU limitation rather than any CPU deficiency. The GTX 1050 Ti's 30th percentile GPU ranking (average score 5316) contrasts sharply with the Ryzen 5 7500F's 82nd percentile CPU ranking (average score 24993), creating a mismatch where the CPU's potential is largely untapped.
In practical terms, the combo's rank means it outperforms only 21 other tested configurations. The measured FPS data supports this low standing: even at the most favorable settings (1080p Low), the combo only reaches 58.2 FPS, which is marginal for smooth gameplay. At 1080p Ultra, the 26 FPS average falls below the threshold for acceptable action-RPG performance. The 1440p results are worse, with the best case (Low) at 35.4 FPS and Ultra at 18 FPS. These figures place the combo in a performance tier typically associated with entry-level laptops or older integrated graphics solutions, despite the modern CPU.
The rank also contextualizes the GPU's benchmark position. The GTX 1050 Ti's nearest rival, the GeForce 930A with a 0% delta in average score, would likely produce nearly identical results in this game. The 0.7% advantage over the AMD Radeon R7 240 (score 5280) is within measurement noise. For users comparing this combo to others in the database, the 1635th rank serves as a clear indicator that this is not a configuration intended for The Technomancer at higher resolutions or settings.
Settings Recommendations
The measured data provides a clear hierarchy of playable settings for this combo. At 1920x1080, Low settings deliver 58.2 FPS, which is the only configuration that approaches a standard 60 FPS target. Medium settings drop to 43.9 FPS, still within a playable range for many users, while High (37.8 FPS) and Ultra (26 FPS) increasingly compromise smoothness. The 14.3 FPS difference between Low and Medium is notable, but the 7.9 FPS jump from Medium to High is less impactful.
For 2560x1440, Low settings at 35.4 FPS represent the best balance, though this falls below ideal playability. Medium (26 FPS) and High (23.9 FPS) are nearly identical, suggesting diminishing returns from settings changes at this resolution. Ultra at 18 FPS is not recommended. At 3840x2160, no setting is playable — the range from 12.4 FPS (Ultra) to 16.6 FPS (Low) is uniformly below minimum thresholds.
The optimal recommendation is 1920x1080 with Low settings, which provides the highest average FPS (58.2) in the entire dataset. Users prioritizing visual quality over frame rate could select Medium (43.9 FPS) as a compromise, but the data shows that the jump from Medium to High (37.8 FPS) offers limited visual benefit for a 14% performance cost. The 1080p Low configuration maximizes the GPU's 2.138 TFLOPS capability, while higher settings expose the 4 GB memory limitation and 112.1 GB/s bandwidth constraints.
Measured FPS Breakdown
At 1920x1080, the combo demonstrates its best performance. Low settings produce 58.2 FPS, Medium drops to 43.9 FPS, High falls to 37.8 FPS, and Ultra bottoms out at 26 FPS. The progression from Low to Ultra shows a 55% performance reduction, with the largest single drop occurring between Medium (43.9 FPS) and High (37.8 FPS) at 6.1 FPS, and the largest absolute drop between Low (58.2 FPS) and Medium (43.9 FPS) at 14.3 FPS.
At 2560x1440, all settings produce lower results. Low settings reach 35.4 FPS, Medium delivers 26 FPS, High manages 23.9 FPS, and Ultra falls to 18 FPS. The difference between Low and Medium is 9.4 FPS, while the gap between High and Ultra is only 5.9 FPS. Compared to 1080p, the 1440p Low setting (35.4 FPS) is 39% slower than 1080p Low (58.2 FPS), illustrating the pixel fill rate penalty.
At 3840x2160, performance collapses. Low settings yield 16.6 FPS, High produces 15.6 FPS, Medium drops to 13.8 FPS, and Ultra reaches only 12.4 FPS. Interestingly, Low outperforms High by just 1 FPS, and Medium is actually slower than High by 1.8 FPS, suggesting the GPU is entirely memory-bandwidth or fill-rate bound at this resolution. The 4K Low result (16.6 FPS) is 71% slower than 1080p Low (58.2 FPS), confirming that the GTX 1050 Ti is not viable beyond 1440p for this title. Across all 12 measured configurations, the highest average is 58.2 FPS (1080p Low) and the lowest is 12.4 FPS (4K Ultra), a 4.7x performance range driven almost entirely by GPU load.
Hardware Specifications
AMD Ryzen 5 7500F
NVIDIA GeForce GTX 1050 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7500F + NVIDIA GeForce GTX 1050 Ti in The Technomancer
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 16.6 |
| 3840x2160 | High | 15.6 |
| 3840x2160 | Medium | 13.8 |
| 3840x2160 | Ultra | 12.4 |
| 2560x1440 | Low | 35.4 |
| 2560x1440 | Medium | 26.0 |
| 2560x1440 | High | 23.9 |
| 2560x1440 | Ultra | 18.0 |
| 1920x1080 | Low | 58.2 |
| 1920x1080 | Medium | 43.9 |
| 1920x1080 | High | 37.8 |
| 1920x1080 | Ultra | 26.0 |
The Technomancer with Ryzen 5 7500F + Other GPUs
See how The Technomancer performs with the same CPU but different graphics cards.
The Technomancer with GTX 1050 Ti + Other CPUs
See how The Technomancer performs with the same GPU but different processors.
Other Games with Ryzen 5 7500F + GTX 1050 Ti
Explore FPS benchmarks for other games using this same hardware combination.