The Technomancer
This combination may struggle with this title, averaging 27 FPS. Consider upgrading hardware or significantly lowering settings.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 10 | 13 | 15 | 20 |
| 1440p QHD | 18 | 24 | 28 | 36 |
| 1080p Full HD | 28 | 36 | 42 | 55 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
The Technomancer with AMD Ryzen 5 7600 + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis
The pairing of the AMD Ryzen 5 7600 with the NVIDIA GeForce GTX 1050 Ti for The Technomancer is a textbook case of a strong CPU being held back by a weak GPU. The Ryzen 5 7600 is a modern 6-core, 12-thread desktop processor built on Zen 4 (Raphael) architecture with a base clock of 3.80 GHz and a boost clock of 5.10 GHz, while the GTX 1050 Ti, released just months before the game, is a low-end Pascal card from 2016 with 4 GB of GDDR5 memory on a 128-bit bus and a 112.1 GB/s bandwidth. The measured performance, ranked 3636 out of 3696 tested combos, reflects that imbalance: the GPU cannot keep up with the CPU’s feed at any resolution or setting. This analysis breaks down the roles of each component, the impact of resolution scaling, the best settings from the measured data, and how the combo ranks.
CPU Role
The AMD Ryzen 5 7600 is a 6-core, 12-thread processor based on the Zen 4 (Raphael) microarchitecture. It operates at a base clock of 3.80 GHz, boosts to 5.10 GHz, and has a TDP of 65 W. It includes 32 MB of shared L3 cache and supports DDR5 memory with a dual-channel interface and 83.2 GB/s system bandwidth. On a CPU‑bound task, its average benchmark score is 26,324 (across multiple tests), placing it in the 78th percentile of all CPUs measured. Its nearest rivals in performance include the AMD Ryzen 9 6900HX (delta +0.2%), the Ryzen 7 7435HS (−0.3%), the Intel Core i9-11900KF (+0.4%), and the Ryzen 7 8540U (+0.5%) — all within a fraction of a percent of the 7600’s average score. The Cinebench R23 multithreaded score is 12,735, and the single‑core score is 1,852, while PassMark reports 27,058 for multithread performance and 3,910 for single thread. Even the shallow threads results (e.g., 3DMark 16‑thread score of 6,499) show am solid capability.
In The Technomancer, which was released in 2016, these CPU stats are more than enough. The game likely cannot take advantage of multiple cores beyond a few, but the 7600’s high single‑thread performance (Geekbench 2,521, Cinebench R23 single aset 1,852) ensures that any CPU‑bound scenario is easily handled. However, the measured frame rates are dominated by the GPU, not the CPU. For example, at 1080p Low, the average is 55 FPS; this is not limited by the CPU because the Ryzen could generate many more frames than the GTX 1050 Ti can render. The disparity becomes apparent when the resolution is increased: the CPU load does not change significantly, yet the frame rate falls dramatically. Thus, the Ryzen 5 7600 is not a regime boundary in this game; it simply outlasts the GPU.
GPU‑ GPU – VRAM, Clocks, and Impact
The NVIDIA GeForce GTX 1050 Ti is a Pascal‑ architecture processor based on the GP107 chip. It has 4 GB of GDDR5 memory on a 128‑bit bus, giving a memory bandwidth of 112.1 GB/s. The GPU’s base clock is 1,291 MHz and its boost clock is 1,392 MHz; the memory clock is 1,752 MHz (7 Gbps effective). Its shading unit count is 768, with 48 texture and 32 ROP units. The FP32 performance is 2.138 TFLOPS.
In the benchmark database, the GTX 1050 Ti has an average score of 4,193 and sits in the 25th percentile of all GPUs, meaning it is slower than three‑quarters of the tested graphics cards. Its closest neighbors are the AMD Radeon R5 M330 (+0.6%), the NVIDIA Quadro K2100M (+1.0%), the Quadro K3000M (−1.1%), and the AMD Radeon Vega 3 (−1.8%). This is a card that was already entry‑level at its launch (October 2016), and its abilities have since been matched or surpassed by integrated graphics.
The GPU’s short performance directly sets the full ceiling for The Technocracy. The measured frames are consistent with the GPU being the sole boundary. Because the CPU is so much stronger, the GPU always works at its maximum capacity. The GPU’s 4 GB VRAM is sufficient for 1080p Low, but at higher resolutions the memory bandwidth and compute capacity become limitations. The overall result is that even at 1080p Low, the card barely averages 55 FPS; at 2160p Ultra, the average drops to 10 FPS, a staggering drop that points to a GPU that cannot handle the pixel throughput.
Resolution Scaling
The measured FPS data for each resolution and preset are direct evidence of the GPU’s bottleneck. At 1920x1080, the Low preset yields an average of 55 FPS. Moving to 2560x1440 Low drops that to 36 FPS, a reduction of 19 FPS (using the numbers: 55→36). Continuing to 3840x2160 Low brings the average down to 20 FPS, another 16 FPS loss. The same pattern holds for all settings: Medium goes 42 → 28 → 15; High 36 → 24 → 13; Ultra nd 28 → 18 → 10.
The frame‑rate scaling with resolution is approximately linear per pixel. Doubling the pixel count (1080p→1440p) reduces the frame rate by about a quarter; quadrupling it (1080p→4K) reduces it to about a third. For instance, from 1080p Low to 1440p Low, the average goes from 55 to 36, a fall of 34%; from 1440p to 4K, 36 to 20, another 44%. This steep decline is characteristic of a GPU ‑limited system: the CPU is not changing its load, but the GPU has to render more pixels per frame, and its fill rate falls short.
The data also show that the minimum and maximum FPS are only recorded for the Medium preset. At 1080p Medium, the range is 36–49 FPS (average 42), narrowing to 23–32 at 1440p and 13–17 at 4K. This consistency in the Medium preset, while within a narrow 13‑FPS swing at 1080p, still underscores that any resolution beyond 1080p makes frame times very long. For all practical purposes, 1080p is the only resolution where the game approaches a playable frame; 1440p and above are only for low‑setting experiments.
Settings Recommendations
When the goal is to get the best as a per‑frame experience, the measured rows define clear choices. The absolute highest average FPS is 55, achieved at 1080p Low. If we accept that any average above 42 FPS is comfortable, then 1080p Medium is a viable compromise, giving 42 FPS while allowing a higher detail set than Low. At 1080p High, the average falls to 36, which might be acceptable to some, but it is only 1 FPS above the 1440p Low – indicating that the cost of raising settings is high at this resolution.
For users who prioritize a higher resolution than 1080p, the data show that even the Low preset at 2560x1440 gives only 36 FPS; that is lower than the 1080p Low and Medium yields. At 4K, even Low (20 FPS) does not cross a playable threshold. Therefore, if the objective is a stay‑ad visual experience with the least sacrifice in framerate, the data indicate that 1920x1080 with Medium settings is the sweet spot: it provides 42 FPS (a 55% drop from Low but a discrete visual bump) and the frame range is measured as 36–49, a margin of 13 FPS from minimum to maximum. No other resolution/settings combination offers an average above 42 except 1080p Low and 1080p High (36) – the latter still gives 36 but with higher detail.
If the user prefers maximum smoothness, 1080p Low at 55 FPS is the clear winner. For a balance between visual and performance, 1080p Medium (42) is a strong candidate. Because only Medium provides min‑max data, its performance is more predictable than presets with unknown variability. In short, the recommended preset is Medium at 1080p, yielding 42 FPS average; alternatively, Low at 1080p for the best frame rate.
How This Combo Ranks
In the database of tested combos for The Technomancer, this pairing sits far down the list. The measured combo rank is 3636 out of 3696 total combinations, placing it in the bottom 1.0% of all tested combos (since 3696 − 3636 = 60). This is an extremely poor performance for a system that includes the modern AMD Ryzen 5 7600. The root cause is the low performance of the GTX 1050 Ti. The GPU’s percentile rank (25) and its average benchmark score of 4193 indicate that it is below most other GPUs in the database. In contrast, the CPU’s percentile is 78, sitting near the top quarter. The imbalance between a CPU that can compute almost any game and a GPU that is essentially at the entry box explains why the overall ranking is so low: the game is heavily dependent on GPU capabilities, and this GPU simply cannot deliver.
The combo is immediate of the CPU’s potential; in a CPU‑bound title the Ryzen would shine, but The Technomancer does not stress it. For a system builder, this ranking sends a clear message: avoid such a pairing for games that require moderate fro. Even though the CPU is very powerful, the GPU becomes the condemning factor. With a different GPU (even one rank higher), the same CPU would likely climb significantly in the rankings.
Measured FPS Breakdown
The full set of measured FPS values is provided in the table below. All numbers are directly from the database for the three resolutions (1920x1080, 2560x1440, 3840x2160) and the four level (Low, Medium, High, Ultra). The Medium entry includes an additional min and max along with the average.
1920x1080 (Full HD)
- Low: average 55 FPS
- Medium: average 42 FPS (min 36, max 49)
- High: average 36 FPS
- Ultra: average 28 FPS
2560x1440 (WQHD)
- Low: average 36 FPS
- Medium: average 28 FPS (min 23, max 32)
- High: average 24 FPS
- Ultra: average 18 FPS
3840x2160 (4K/2160p)
- Low: average 20 FPS
- Medium: average 15 FPS (min 13, max 17)
- High: average 13 FPS
- Ultra: average 10 FPS
At 1080p, the average FPS spans from 28 to 55, a range of 27 FPS. At 1440p, the range is 18 to 36 (spread of 18 FPS). At 2160p, the range is 10 to 20 (span of 10). The data shows that the same settings produce about two‑thirds of the FPS when going from 1080p to 1440p, and roughly half of that again to 2160p. For instance, 1080p High (36 FPS) drops to 24 at 1440p, and to 13 at 2160p. This steady degradation illustrates a GPU that is completely over‑tasked by higher pixel counts.
The only frame‑time data included is the
Hardware Specifications
AMD Ryzen 5 7600
NVIDIA GeForce GTX 1050 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7600 + NVIDIA GeForce GTX 1050 Ti in The Technomancer
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 20.0 |
| 3840x2160 | Medium | 15.0 |
| 3840x2160 | High | 13.0 |
| 3840x2160 | Ultra | 10.0 |
| 2560x1440 | Low | 36.0 |
| 2560x1440 | Medium | 28.0 |
| 2560x1440 | High | 24.0 |
| 2560x1440 | Ultra | 18.0 |
| 1920x1080 | Low | 55.0 |
| 1920x1080 | Medium | 42.0 |
| 1920x1080 | High | 36.0 |
| 1920x1080 | Ultra | 28.0 |
The Technomancer with Ryzen 5 7600 + Other GPUs
See how The Technomancer performs with the same CPU but different graphics cards.
The Technomancer with GTX 1050 Ti + Other CPUs
See how The Technomancer performs with the same GPU but different processors.
Other Games with Ryzen 5 7600 + GTX 1050 Ti
Explore FPS benchmarks for other games using this same hardware combination.