Evolve

The AMD Ryzen 5 7500F and NVIDIA GeForce GTX 1050 Ti pairing represents a stark generational mismatch. The CPU is a modern 6-core, 12-thread Zen 4 part, while the GPU is a 2016-era entry-level Pascal chip. Benchmark data from Evolve shows this combination struggles significantly, producing playable frame rates only at the lowest settings and resolutions. The measured results place this combo at rank 1664 out of 1695 tested configurations, indicating it falls in the bottom 2% of all pairings for this title.

CPU Role

The AMD Ryzen 5 7500F brings substantial processing headroom to this pairing. It operates with 6 cores and 12 threads, running at a base clock of 3.70 GHz and boosting to 5.00 GHz. This Zen 4 architecture chip, built on a 5 nm process, delivers strong synthetic scores: a Cinebench R23 multi-core result of 22799 and a single-core score of 3218. In Geekbench, it achieves 12686 multi-core and 2759 single-core. The processor's 32 MB of shared L3 cache and DDR5 memory support with 83.2 GB/s bandwidth provide ample data throughput for game logic and AI.

The CPU's percentile ranking of 82 means it outperforms 82% of all tested processors. Its average benchmark score of 24993 places it in close competition with several rivals: the Intel Core i7-11850H scores 24974 (a 0.1% delta), the AMD Ryzen 7 2700X scores 25057 (a -0.3% delta), and the AMD Ryzen 5 8400F scores 25064 (also -0.3%). This positioning shows the 7500F is a mid-range performer in synthetic tests, more than capable of feeding frames to a modern graphics card.

However, in Evolve, the CPU's potential is entirely untapped. The measured frame rates at 1920x1080 with Low settings reach 60.8 FPS average. At Ultra settings, that drops to 24.4 FPS. The pattern across resolutions reveals that the bottleneck is not the processor. At 3840x2160, frame rates fall to 15.5 FPS on High and 12.6 FPS on Ultra. These low scores persist regardless of CPU load, indicating the graphics card is the limiting factor. The CPU's 3DMark scores — 6376 with 16 threads and 6379 with maximum threads — show consistent scaling, but this power cannot translate to higher frame rates when the GPU cannot render frames quickly enough.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is the primary constraint in this configuration. It features 4 GB of GDDR5 memory on a 128-bit bus, delivering 112.1 GB/s bandwidth. The GPU runs at a base clock of 1291 MHz with a boost of 1392 MHz. Its memory operates at 1752 MHz, or 7 Gbps effective. With 768 shading units, 48 TMUs, and 32 ROPs, the card produces 2.138 TFLOPS of FP32 performance. The 14 nm Pascal chip draws 75 W and requires no additional power connectors, fitting in a dual-slot 145 mm package.

The GPU's benchmark results place it at the 30th percentile among all graphics cards. Its average benchmark score of 5316 puts it in direct competition with mobile and low-end desktop parts: the NVIDIA GeForce 930A scores 5317 (0% delta), the GeForce 940M scores 5297 (0.4% delta), and the AMD Radeon R7 240 scores 5280 (0.7% delta). In DirectX 11 tests, the card scores 45, while DirectX 12 drops to 26. The Passmark G3D score of 6340 and compute score of 2652 reflect its modest capabilities.

In Evolve, the GPU's limitations are immediately apparent. At 1920x1080, the card achieves 60.8 FPS on Low, which drops to 50.8 on Medium and 39.9 on High. The Ultra preset falls to 24.4 FPS. The situation worsens at higher resolutions. At 2560x1440, Low produces 40.2 FPS, but High dips to 23.4 FPS and Ultra to 19.6 FPS. At 3840x2160, even Low settings only manage 21.7 FPS, while High yields 15.5 FPS and Ultra just 12.6 FPS. The 4 GB VRAM capacity appears insufficient for Evolve's higher detail levels, as the memory bandwidth of 112.1 GB/s cannot sustain the texture and geometry demands at elevated resolutions.

FAQ

Q: What is the best frame rate this combo can achieve in Evolve?

A: The highest measured average is 60.8 FPS, achieved at 1920x1080 resolution with Low settings. This is the only configuration reaching 60 FPS or above.

Q: How does this combo compare to other tested configurations in Evolve?

A: The combo ranks 1664 out of 1695 tested combinations, placing it in the bottom 2% of all pairings for this game.

Q: Is the CPU or GPU the limiting factor in this pairing?

A: The GPU is the clear bottleneck. The CPU ranks at the 82nd percentile among processors, while the GPU sits at the 30th percentile. Frame rates drop dramatically as resolution increases, a pattern consistent with GPU limitation.

Q: What happens to performance when moving from 1080p to 1440p?

A: At 2560x1440 with Low settings, the average FPS drops from 60.8 to 40.2, a reduction of roughly one-third. At High settings, the drop is from 39.9 to 23.4 FPS.

Q: Can this combo handle 4K resolution in Evolve?

A: No. At 3840x2160, the best result is 21.7 FPS on Low settings. Ultra settings produce only 12.6 FPS, which is below playable thresholds.

Q: How does the GPU compare to its nearest rivals in synthetic benchmarks?

A: The GTX 1050 Ti's average benchmark score of 5316 is nearly identical to the GeForce 930A at 5317, while slightly ahead of the GeForce 940M by 0.4% and the Radeon R7 240 by 0.7%.

How This Combo Ranks

The combination of AMD Ryzen 5 7500F and NVIDIA GeForce GTX 1050 Ti ranks 1664 out of 1695 tested combos in Evolve. This places the pairing in the bottom 31 positions of all configurations, a remarkably low standing given the CPU's modern architecture. The processor alone outperforms 82% of all CPUs, but the GPU's 30th percentile standing drags the entire system down.

The measured frame rates confirm this ranking is justified. At 1920x1080, the combo only crosses the 60 FPS threshold at Low settings. The gap between Low and Ultra at 1080p is substantial: 60.8 FPS versus 24.4 FPS, a difference of 36.4 FPS. At 2560x1440, the spread narrows in absolute terms but remains proportionally similar: 40.2 FPS on Low versus 19.6 FPS on Ultra. The 3840x2160 results are uniformly poor, with all settings falling below 22 FPS.

The CPU's synthetic performance suggests it could support far higher frame rates if paired with a stronger GPU. Its Cinebench R23 multi-core score of 22799 and 3DMark 16-thread score of 6376 indicate substantial processing capability. Yet in Evolve, the system's output is constrained entirely by the GTX 1050 Ti's rendering capacity. The rank of 1664 reflects this imbalance, showing that the GPU is the definitive performance ceiling for this configuration.

Settings Recommendations

For this combo in Evolve, the data supports a clear recommendation: use Low settings at 1920x1080. This configuration produces an average of 60.8 FPS, the only measured result that meets standard 60 FPS display refresh rates. The next viable option is Medium at 1080p, yielding 50.8 FPS, which remains playable but with a noticeable reduction in smoothness.

At 2560x1440, the best option is Low with 40.2 FPS, though this represents a significant compromise in both resolution and visual quality. The Medium preset at 1440p drops to 33.9 FPS, and High falls to 23.4 FPS. Neither 1440p nor 3840x2160 configurations reach 60 FPS, so users prioritizing frame rate should stay at 1080p.

The High preset at 1080p produces 39.9 FPS, which sits between playable and uncomfortable for fast-paced FPS gameplay. Ultra settings at any resolution fail to provide acceptable performance, with the best Ultra result being 24.4 FPS at 1080p. Given that Evolve is a shooter genre title, the Low preset at 1080p offers the most balanced experience, providing double the frame rate of High settings (60.8 versus 39.9 FPS) while maintaining a stable playable experience. Users who prefer visual fidelity over smoothness may consider Medium at 1080p, which retains a 50.8 FPS average while offering improved detail over Low.