Palworld

Palworld presents a demanding workload that scales significantly with both resolution and quality settings. For the combination of the Intel Core i7-14700F and the Intel Arc B570, the measured data reveals a system that is well-balanced at 1080p but becomes increasingly GPU-bound as resolution climbs. The Arc B570’s 10 GB of VRAM and 380.0 GB/s of bandwidth are sufficient for the game's world, but the rendering load at higher resolutions exposes the limits of its 11.52 TFLOPS of FP32 compute. The Core i7-14700F, with its 20 cores and 28 threads, provides ample headroom to keep the GPU fed, evidenced by the consistent scaling of frame rates across settings at lower resolutions. This analysis breaks down the measured FPS data to characterize the performance envelope of this specific pairing.

Resolution Scaling

The transition from 1080p to 4K produces a predictable and steep decline in frame rates across all settings, confirming that Palworld’s rendering pipeline is highly sensitive to pixel count. At Low settings, the average frame rate drops from 130 FPS at 1920x1080 to 85 FPS at 2560x1440, and further down to 47 FPS at 3840x2160. This represents a 64% reduction in average FPS from 1080p to 4K, a clear indicator that the GPU is the primary limiting factor at the higher resolution. The scaling is nearly linear with the pixel count increase, suggesting that the Intel Arc B570’s fillrate and shading capabilities are the bottleneck.

At High settings, the same pattern emerges, with average FPS falling from 81 at 1080p to 53 at 1440p and finally to 30 at 4K. The 4K High result is particularly telling, as it sits right at the edge of playability, indicating that this setting is only viable for users who prioritize visual fidelity over smooth motion. The Ultra preset exacerbates this further, with a 4K average of just 22 FPS, making it effectively unplayable for any demanding action. The data shows that the performance cost of each resolution step is roughly consistent, with 1440p delivering approximately 65% of the 1080p performance, and 4K delivering only about 37% of the 1080p performance at High settings.

The fact that the frame rate drops so dramatically with resolution indicates that the system is not CPU-limited at these higher resolutions. If the processor were the constraint, we would expect to see a much smaller delta between 1440p and 4K. The Core i7-14700F, with its high 5.40 GHz boost clock, is clearly capable of delivering frames faster than the Arc B570 can render them at 4K. This behavior positions the Intel Arc B570 as a solid 1080p and capable 1440p card for Palworld, but one that struggles to maintain high frame rates at 4K, especially with higher quality presets.

Settings Recommendations

Based on the measured rows, the Medium preset offers the best balance between visual quality and performance for this hardware combination. At 1920x1080, Medium delivers an average of 105 FPS with a minimum of 89 FPS, ensuring a smooth experience without the frame rate dips that can occur in busy scenes. This is a substantial improvement over the High preset’s 81 FPS average, and it comes with a visual difference that is often imperceptible during fast-paced gameplay. The 4K Medium result of 38 FPS is also more playable than the High preset’s 30 FPS, showing that this preset is the safe choice for users who want to push resolution without sacrificing too much fluidity.

For users with high-refresh-rate 1080p monitors, the Low preset is the only option that truly unlocks the system's potential. The 130 FPS average at Low settings provides the headroom needed to take advantage of 120Hz or 144Hz displays, and it also serves as a competitive advantage in a game where reaction time matters. The jump from Low to Medium costs 25 FPS, which is a significant trade-off for the graphical improvements offered. While High is playable at 81 FPS, it is not optimal for high-refresh gaming, and Ultra’s 61 FPS average is better suited for users who prioritize visuals and have a 60Hz display.

At 2560x1440, the Medium preset remains the recommended choice, with an average of 69 FPS and a minimum of 59 FPS, which is adequate for a smooth experience on most monitors. The High preset at 53 FPS is playable, but the minimum frame rate is likely to dip into the 40s during intense moments, which can feel stuttery. The Low preset at 85 FPS is the best option for competitive play at this resolution, but it undermines the visual benefits of moving to 1440p. For 4K, the data suggests that users should stick to Low (47 FPS) or Medium (38 FPS) presets, as the High and Ultra settings fall below the 30 FPS threshold for consistent playability.

CPU Role

The Intel Core i7-14700F is a high-end desktop processor that provides a robust foundation for Palworld. With 20 cores and 28 threads, it offers substantial multi-threading capabilities that are beneficial for the game’s simulation and world-streaming tasks. The processor’s performance is well-documented in its benchmark scores, including a Cinebench R23 multi-core score of 35122 and a single-core score of 4958. This strong single-thread performance, driven by the 5.40 GHz boost clock, is crucial for the game’s main game thread, which often dictates the maximum achievable frame rate in CPU-bound scenarios.

In this system, the CPU’s role is to ensure that the Intel Arc B570 is never starved for data. The measured FPS data shows that at 1080p, the frame rates scale consistently with settings, indicating that the CPU can handle the overhead of increased draw calls and physics calculations. The i7-14700F’s 33 MB of shared L3 cache helps reduce memory latency, which is beneficial for the large, open-world environments in Palworld. Its performance percentile of 91 versus all CPUs places it in the top tier, and its nearest rivals, such as the AMD Ryzen 9 7900X, show a negligible delta of 0.6%, confirming that the CPU is not a performance bottleneck in this pairing.

The benchmark results suggest that the i7-14700F has significant headroom for this game. The Passmark multi-thread score of 41317 and the Geekbench multi-core score of 19620 are indicative of a processor that can handle much more than just this title. The data shows that as resolution increases, the CPU’s influence on the final frame rate diminishes, moving the bottleneck firmly to the GPU. This is a healthy sign for a balanced system, as it means the CPU will not hold back the GPU in future upgrades or when playing more demanding titles. The processor’s 65W TDP also indicates an efficient design that delivers high performance without excessive power draw.

FAQ

Q: What is the best resolution for this CPU/GPU combo in Palworld?

A: The data shows that 1920x1080 is the sweet spot, with all settings producing playable frame rates. At 2560x1440, the Medium preset is the most balanced, while 4K performance is limited, requiring Low or Medium settings to stay above 30 FPS.

Q: How does the Core i7-14700F perform relative to its closest rivals?

A: The Intel Core i7-14700F has an average benchmark score of 53620, which is 0.6% higher than the AMD Ryzen 9 7900X and 0.8% higher than the AMD EPYC 7313P. It is also 0.2% behind the Intel Xeon 6505P and 0.3% ahead of the Intel Xeon Phi 7290, indicating a highly competitive performance tier.

Q: Is the Intel Arc B570's VRAM sufficient for Palworld?

A: With 10 GB of GDDR6 memory and a 160-bit bus, the Arc B570 has a memory bandwidth of 380.0 GB/s. The measured FPS data shows that this is sufficient for 1080p and 1440p, but at 4K, the frame rates drop significantly, suggesting that the memory capacity or bandwidth may be a limiting factor at that resolution.

Q: Why does the frame rate drop so much from 1080p to 4K?

A: The data indicates a 64% drop in average FPS at Low settings from 1920x1080 (130 FPS) to 3840x2160 (47 FPS). This steep decline is due to the increased pixel count, which places an exponentially higher load on the GPU's shading and rasterization units, making it the primary bottleneck.

Q: What settings should I use for a 60Hz 4K monitor?

A: According to the measured data, you should use the Low preset, which yields an average of 47 FPS, or the Medium preset at 38 FPS. The High and Ultra presets fall below 30 FPS, which is not suitable for smooth gameplay on a 60Hz display.

Q: How does this combo rank among all tested combinations?

A: This specific combo of Intel Core i7-14700F and Intel Arc B570 ranks 2362 out of 2944 tested combinations in Palworld. This places it in the lower half of all systems tested, reflecting its performance limitations at higher resolutions.

GPU Role

The Intel Arc B570 is the primary determinant of frame rates in Palworld for this system. Its performance is characterized by its Xe2-HPG architecture, built on a 5 nm process by TSMC, which includes 2304 shading units and 80 ROPs. The GPU’s base and boost clock are both set at 2500 MHz, providing a consistent compute throughput of 11.52 TFLOPS for FP32 operations. The 10 GB of GDDR6 memory on a 160-bit bus provides 380.0 GB/s of bandwidth, which is a critical resource for a game with large textures and streaming environments.

The measured FPS data clearly shows the GPU’s workload scaling with resolution. At 1080p, the B570 is able to deliver high frame rates, such as 130 FPS at Low settings, but it begins to struggle as the pixel count increases. The 4K results are particularly telling, with the Ultra preset achieving only 22 FPS, which is less than a third of the performance at 1080p Low. This behavior is consistent with a GPU that is limited by its raw compute power rather than its memory bandwidth, as the 380.0 GB/s is not the primary constraint at lower resolutions. The GPU’s Passmark G3D score of 14195 places it in the 65th percentile of all GPUs, and its nearest rival, the Intel Arc A750, shows a delta of only -0.1%, indicating they are closely matched in overall compute capability.

The B570’s performance in Palworld is also influenced by its API support, including DirectX 12 Ultimate, which allows for advanced features like ray tracing. However, the data suggests that the game does not heavily rely on these features, as the frame rates are more dependent on resolution and preset. The GPU’s 150W TDP and dual-slot design are typical for this class of card, and its PCIe 4.0 x8 interface is sufficient to avoid bottlenecks with the i7-14700F. The measured results indicate that the B570 is a competent 1080p card for Palworld, capable of high refresh rates on lower presets, but it is not a 4K powerhouse, as the data shows a clear ceiling around 47 FPS even at the lowest settings.

Measured FPS Breakdown

At 1920x1080, the system delivers its best performance. The Low preset achieves an average of 130 FPS, making it the only setting that truly maximizes high-refresh-rate displays. The Medium preset provides a balanced experience with an average of 105 FPS, and recorded minimum and maximum values of 89 and 121 FPS, respectively. High settings lower the average to 81 FPS, which is still smooth for most users, while the Ultra preset yields an average of 61 FPS, which is suitable for 60Hz displays but leaves little headroom for demanding scenes.

Moving to 2560x1440, the performance drops noticeably. The Low preset maintains a strong 85 FPS average, making it the best choice for competitive play at this resolution. The Medium preset averages 69 FPS, with a minimum of 59 FPS and a maximum of 80 FPS, offering a good balance for immersive gameplay. High settings reduce the average to 53 FPS, which can dip below 50 FPS during intense action, while the Ultra preset falls to 40 FPS, which is playable but not ideal for fast-paced combat.

At 3840x2160, the data shows the GPU’s limits. The Low preset is the most viable option, with an average of 47 FPS. The Medium preset averages 38 FPS, with minimum and maximum values of 33 and 44 FPS, respectively, which is still playable on a 60Hz screen. The High preset drops to 30 FPS, which is borderline for smoothness, and the Ultra preset plummets to 22 FPS, making it unsuitable for general play. These numbers highlight the significant performance cost of 4K rendering on the Intel Arc B570.

How This Combo Ranks

In the grand scheme of tested hardware combinations for Palworld, the Intel Core i7-14700F and Intel Arc B570 pairing holds a rank of 2362 out of 2944 total combos. This places it in the 80th percentile of all systems, meaning that roughly 80% of the tested combinations outperform it. This rank is a reflection of the GPU’s mid-range positioning, as the CPU is a top-tier performer that is unlikely to be the limiting factor. The data suggests that this combo is best suited for 1080p gaming, where it can deliver high frame rates, but it will struggle to compete with systems featuring higher-end graphics cards at 1440p or 4K.

The rank is heavily influenced by the GPU’s performance, as the i7-14700F’s high benchmark scores do not translate to higher frame rates when the GPU is the bottleneck. The combo’s position in the lower-middle of the pack is consistent with the Arc B570’s 65th percentile standing among all GPUs. When compared to other combos, this system offers a capable 1080p experience, but users seeking higher resolutions or maximum settings would need to consider a more powerful GPU. The data indicates that while the processor has significant headroom, the graphics card is the constraining factor, and this combo’s rank accurately reflects its overall gaming performance in Palworld.