Palworld

Palworld

AVERAGE FPS
63
good

This combination provides smooth gameplay with an average of 63 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 22 30 38 47
1440p QHD 40 53 69 85
1080p Full HD 61 81 105 130

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 47
3840x2160 Medium 38
3840x2160 High 30
3840x2160 Ultra 22
2560x1440 Low 85
2560x1440 Medium 69
2560x1440 High 53
2560x1440 Ultra 40
1920x1080 Low 130
1920x1080 Medium 105
1920x1080 High 81
1920x1080 Ultra 61

Palworld with AMD Ryzen 9 5950X + Intel Arc B570, In-Depth Analysis

Palworld is a demanding survival title, and the combination of the AMD Ryzen 9 5950X and Intel Arc B570 produces a specific performance profile that requires careful settings management. The measured data shows a system that can deliver smooth frame rates at lower resolutions and settings, but which struggles to maintain playable performance at 4K. The 16-core, 32-thread Ryzen 9 5950X provides ample computational headroom, while the Arc B570's 10 GB of VRAM and 160-bit memory bus become limiting factors at higher resolutions. This analysis breaks down the measured FPS data to determine the optimal experience for this pairing.

Settings Recommendations

The benchmark data indicates that the "Medium" preset is the sweet spot for this combo, offering the best balance between visual fidelity and frame rate stability across all tested resolutions. At 1920x1080, Medium delivers 105 FPS average with a minimum of 89 FPS and a maximum of 121 FPS, which is a highly playable experience. The jump from Low to Medium costs 25 FPS (from 130 to 105), but the visual improvement in a game like Palworld is typically substantial, making this trade-off worthwhile for most players. At 2560x1440, Medium produces 69 FPS average with a minimum of 59 FPS, which remains fluid enough for the survival gameplay loop. The 2560x1440 Medium result is particularly notable because it maintains a minimum above 60 FPS, unlike the High preset which drops to 53 FPS average.

At 3840x2160, the Medium preset is the only viable option for a semi-playable experience, yielding 38 FPS average with a minimum of 33 FPS and a maximum of 44 FPS. While this is below the 60 FPS target, it is consistent and avoids the severe dips seen in other presets. The High preset at 4K drops to 30 FPS average, and Ultra falls to 22 FPS, both of which are difficult to recommend for active gameplay. For 1080p and 1440p displays, Medium is the clear recommendation. For 4K, the data suggests that players should either accept the Medium preset's 38 FPS or consider lowering the resolution, as the Ultra preset's 22 FPS average is too low for the game's real-time combat and base-building mechanics.

CPU Role

The AMD Ryzen 9 5950X is a 16-core, 32-thread processor based on the Zen 3 architecture, with a base clock of 3.40 GHz and a boost clock of 4.90 GHz. It has a 64 MB L3 cache and supports DDR4 memory with a dual-channel bus. The CPU's benchmark scores place it in the 91st percentile of all CPUs, with an average benchmark score of 51,947. Its nearest rivals include the Intel Core Ultra 5 235HX (0.2% faster), AMD EPYC 8124P (0.3% faster), Intel Core i9-13900F (0.4% slower), and Intel Core i7-14700 (0.7% slower). This indicates that the 5950X is a top-tier performer for CPU-intensive tasks.

In Palworld, the game's simulation of the open world, creature AI, and physics benefits significantly from the high multi-threaded performance. The Ryzen 9 5950X's Cinebench R23 multicore score of 26,017 and Geekbench multicore score of 15,233 demonstrate its capability to handle the game's background simulation while maintaining high frame rates. The data shows that at 1920x1080 with Low settings, the combo achieves 130 FPS, which is the highest measured result. This high frame rate at lower settings suggests that the CPU is not the primary bottleneck in this configuration. The 3DMark 16-thread score of 10,810 and max-thread score of 11,597 indicate that the processor can manage the game's threading demands without issue.

The CPU's high single-thread performance, evidenced by a 3DMark single-thread score of 944 and a PassMark single-thread score of 3,470, ensures that game logic and draw calls are processed efficiently. This is important for Palworld, where the player character's actions and the behavior of Pals are dependent on responsive CPU processing. The fact that the 5950X is only 0.2% slower than the Intel Core Ultra 5 235HX in average benchmark score suggests that it is not leaving performance on the table in CPU-bound scenarios. The measured FPS data confirms this: even at higher resolutions, the frame rate drops are more attributable to GPU limitations than CPU capabilities.

GPU Role

The Intel Arc B570 is a discrete graphics card based on the Xe2-HPG architecture, built on a 5 nm process. It features 2,304 shading units, 144 texture mapping units, and 80 raster output units, with 18 ray tracing cores. The GPU operates at a base and boost clock of 2500 MHz, with memory running at 2375 MHz (19 Gbps effective). It has 10 GB of GDDR6 memory on a 160-bit bus, providing a bandwidth of 380.0 GB/s. The card's benchmark scores place it in the 65th percentile of all GPUs, with an average benchmark score of 20,556. Its nearest rivals include the NVIDIA GeForce RTX 3070 Mobile (0.1% faster), Intel Arc A750 (0.1% slower), NVIDIA Quadro M4000M (0.4% faster), and AMD Radeon R9 M390X (0.5% slower).

The GPU's role in Palworld is critical, as the game's vibrant environments, creature models, and lighting effects place a heavy load on the graphics processor. The data shows a clear scaling pattern: as resolution increases, the average FPS drops significantly. At 1920x1080, the GPU delivers 130 FPS at Low, 105 FPS at Medium, 81 FPS at High, and 61 FPS at Ultra. At 2560x1440, these numbers fall to 85, 69, 53, and 40 FPS respectively. At 3840x2160, the GPU manages only 47, 38, 30, and 22 FPS for Low, Medium, High, and Ultra. This scaling indicates that the 10 GB VRAM buffer and 160-bit memory bus become limiting factors at higher resolutions.

The Arc B570's 380.0 GB/s memory bandwidth is sufficient for 1080p and 1440p gaming, but the data suggests it is insufficient for 4K Ultra settings, where the 22 FPS average indicates a severe bottleneck. The GPU's 11.52 TFLOPS of FP32 compute power and 360.0 GTexel/s texture rate are competitive for its class, but the 4K Ultra result of 22 FPS shows that the card is overstretched at that configuration. The measured results show that the GPU can maintain playable frame rates at 1440p Medium (69 FPS) and 1080p High (81 FPS), making it a capable card for mainstream gaming resolutions. The PassMark G3D score of 14,195 and 3DMark Steel Nomad score of 2,649 align with the observed in-game performance, indicating a consistent performance profile.

How This Combo Ranks

The AMD Ryzen 9 5950X and Intel Arc B570 combination is ranked 2,985th out of 3,711 tested combos for Palworld, placing it in the bottom 20% of all configurations. This ranking is primarily due to the GPU's limitations, as the CPU is a high-performing part. The combo's ranking of 2,985 out of 3,711 means that 726 other combinations perform better in this game. This is a significant finding, as it shows that the pairing is not optimal for Palworld, despite the CPU's strong benchmark performance.

The low combo rank is surprising given the CPU's 91st percentile ranking, but it highlights the GPU's role as the bottleneck. The Arc B570's 65th percentile GPU ranking and its measured performance in Palworld indicate that it cannot fully utilize the Ryzen 9 5950X's capabilities in this specific title. The data suggests that a more balanced pairing with a mid-range CPU and a higher-tier GPU would yield better results in Palworld. The combo's rank is particularly poor at higher resolutions, where the GPU's VRAM and bandwidth limitations are most pronounced. At 4K Ultra, the 22 FPS average is among the lowest measured results for any modern combination, underscoring the GPU's inadequacy for this game at that resolution.

The benchmark data indicates that this combo is best suited for 1080p gaming, where it can achieve respectable frame rates across all settings. At 1440p, the combo becomes marginal, requiring Medium settings to maintain a 60 FPS average. At 4K, the combo is not recommended for anything beyond Low settings, and even then, the 47 FPS average is below the 60 FPS target. The combo's rank of 2,985 out of 3,711 reflects these limitations, positioning it as a budget-oriented configuration for Palworld rather than a high-performance one.

FAQ

Q: What is the best resolution for this CPU-GPU combo in Palworld?

A: The measured data shows that 1920x1080 is the best resolution. At 1080p, the combo achieves 130 FPS at Low, 105 FPS at Medium, 81 FPS at High, and 61 FPS at Ultra. At 2560x1440, the frame rates drop to 85, 69, 53, and 40 FPS respectively, while at 4K they fall to 47, 38, 30, and 22 FPS.

Q: Can this combo handle Palworld at 4K Ultra settings?

A: No. The measured FPS at 3840x2160 Ultra is 22 FPS average, which is not playable. Even at 4K High, the average is 30 FPS. The 4K Medium preset provides 38 FPS with a minimum of 33 FPS, which is the only semi-playable option at that resolution.

Q: How does the Ryzen 9 5950X compare to its nearest rival in terms of benchmark scores?

A: The Ryzen 9 5950X has an average benchmark score of 51,947, which is 0.2% lower than the Intel Core Ultra 5 235HX (52,073) and 0.3% lower than the AMD EPYC 8124P (52,121). It is 0.4% higher than the Intel Core i9-13900F (51,730) and 0.7% higher than the Intel Core i7-14700 (52,301).

Q: Is the Intel Arc B570's VRAM sufficient for Palworld at high settings?

A: The Arc B570 has 10 GB of GDDR6 memory with a 160-bit bus and 380.0 GB/s bandwidth. The measured data shows that at 2560x1440 High, the average FPS is 53, which is below the 60 FPS target. The 4K results (30 FPS at High) suggest that the VRAM capacity and bandwidth are insufficient for high settings at higher resolutions.

Q: What settings preset provides the best balance of performance and visual quality?

A: The Medium preset is the best choice. At 1920x1080, it delivers 105 FPS average with 89 FPS minimums and 121 FPS maximums. At 2560x1440, it delivers 69 FPS average with 59 FPS minimums. This preset offers a significant visual improvement over Low while maintaining frame rates above 60 FPS at 1080p and close to it at 1440p.

Q: How does the combo's rank in Palworld compare to other tested combinations?

A: The combo ranks 2,985th out of 3,711 tested combos, placing it in the bottom 20% of all configurations tested for Palworld. This indicates that the combination of the Ryzen 9 5950X and Arc B570 is not well-suited for this specific game, primarily due to the GPU's performance limitations.

Measured FPS Breakdown

The measured FPS data for Palworld with the AMD Ryzen 9 5950X and Intel Arc B570 is presented below, organized by resolution and settings preset.

At 1920x1080, the combo delivers its best performance. With Low settings, the average FPS is 130. The Medium preset yields an average of 105 FPS, with a minimum of 89 FPS and a maximum of 121 FPS. The High preset achieves an average of 81 FPS. The Ultra preset produces an average of 61 FPS. This resolution provides the most playable experience across all settings, with even Ultra maintaining an average above 60 FPS.

At 2560x1440, performance drops noticeably. The Low preset averages 85 FPS. The Medium preset averages 69 FPS, with a minimum of 59 FPS and a maximum of 80 FPS. The High preset averages 53 FPS. The Ultra preset averages 40 FPS. This resolution is playable at Medium settings, which maintains a minimum close to 60 FPS, but High and Ultra settings fall below ideal frame rates.

At 3840x2160, the combo struggles to maintain playable performance. The Low preset averages 47 FPS. The Medium preset averages 38 FPS, with a minimum of 33 FPS and a maximum of 44 FPS. The High preset averages 30 FPS. The Ultra preset averages 22 FPS. At this resolution, only the Low preset approaches a playable frame rate, and even it falls short of the 60 FPS target.

The data shows a clear pattern: the combo is well-suited for 1080p gaming, capable of 1440p gaming at Medium settings, and inadequate for 4K gaming beyond Low settings. The 2560x1440 Medium result of 69 FPS average and 59 FPS minimum is the best balance of resolution and performance for players who want higher fidelity. The 1920x1080 Medium result of 105 FPS average provides the smoothest experience with good visual quality. The 3840x2160 results, ranging from 22 to 47 FPS, are only suitable for players who prioritize resolution over frame rate and are willing to use Low or Medium settings.

Hardware Specifications

AMD Ryzen 9 5950X

Cores / Threads 16 / 32
Base Clock 3400 MHz
Boost Clock 4900 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

Intel Arc B570

VRAM 10 GB GDDR6
Base Clock
Boost Clock 2500 MHz MHz
TDP 150 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 9 5950X + Intel Arc B570 in Palworld

Resolution Settings Avg FPS
3840x2160 Low 47.0
3840x2160 Medium 38.0
3840x2160 High 30.0
3840x2160 Ultra 22.0
2560x1440 Low 85.0
2560x1440 Medium 69.0
2560x1440 High 53.0
2560x1440 Ultra 40.0
1920x1080 Low 130.0
1920x1080 Medium 105.0
1920x1080 High 81.0
1920x1080 Ultra 61.0

Palworld with Ryzen 9 5950X + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with Arc B570 + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 9 5950X + Arc B570

Explore FPS benchmarks for other games using this same hardware combination.