Palworld

The AMD Ryzen 5 7600 and AMD Radeon RX 6600 combination delivers a playable but resolution-sensitive experience in Palworld, with the GPU emerging as the primary bottleneck at higher settings. The data shows a clear hierarchy: 1080p performance is strong, 1440p is viable, and 4K is only feasible at Low settings. This pairing ranks in the 19th percentile of tested combos for this game, indicating that while it is not a top-tier configuration, it is far from the bottom of the pack.

Resolution Scaling

The measured FPS data reveals a steep performance decline as resolution increases, which is characteristic of a system where the graphics card is the limiting factor. At 1080p with High settings, the combo produces 88.5 FPS. Moving to 1440p drops this to 57.1 FPS, a reduction of 35.5%. At 4K, the frame rate falls to 34.9 FPS, which is 60.6% lower than the 1080p result. This scaling pattern is consistent across all settings presets.

The delta between resolutions is most pronounced at Ultra settings. The 1080p Ultra result of 67 FPS falls to 46.2 FPS at 1440p, and then plummets to 21.7 FPS at 4K. The 4K Ultra figure represents a 67.6% drop from the 1080p Ultra score. This indicates that the RX 6600's 8 GB of VRAM and 224.0 GB/s memory bandwidth are insufficient to maintain fluid frame rates at 4K with maximum graphical fidelity.

The scaling from Low to Ultra at each resolution also reveals the GPU's workload characteristics. At 1080p, the spread from Low (139.3 FPS) to Ultra (67 FPS) is 72.3 FPS. At 1440p, this spread narrows to 43.5 FPS. At 4K, the spread compresses further to 27.4 FPS. This compression at higher resolutions confirms that the GPU is saturated, and the CPU's 6 cores and 12 threads have ample headroom to feed frames even at 4K Low, where the 49.1 FPS result is still the second-highest 4K figure recorded.

FAQ

Q: What is the best resolution to play Palworld with this hardware?

A: The data indicates 1080p is the sweet spot. At High settings, the combo achieves 88.5 FPS, and even at Ultra it maintains 67 FPS, both of which are above the common 60 FPS threshold. 1440p is playable at Medium (74 FPS) and High (57.1 FPS), but 4K requires Low settings (49.1 FPS) for a playable experience.

Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?

A: The Ryzen 5 7600 has an average benchmark score of 26617, placing it in the 83rd percentile of all CPUs. It is virtually tied with the AMD Ryzen 7 5800X3D, which scores 26574, a delta of only 0.2%. It also edges out the Intel Core i9-11900K (26546) by 0.3%, while trailing the Intel Core i9-12900HK (26672) by a negligible 0.2%.

Q: Is the GPU's performance close to other cards in its class?

A: The RX 6600's average benchmark score is 25235, placing it in the 69th percentile of all GPUs. Its nearest rival, the AMD Radeon 890M, scores 25246, a delta of 0%. It is essentially tied with the AMD Radeon RX 580 2048SP (25287, -0.2%) and the AMD Radeon RX 6700M (25180, 0.2%). The NVIDIA GeForce RTX 3060 Ti is only 0.5% ahead with a score of 25120.

Q: What is the highest FPS recorded in the measured data?

A: The highest average FPS is 139.3, achieved at 1920x1080 resolution with Low settings. This is more than double the 4K Ultra score of 21.7 FPS, highlighting the extreme performance range of this configuration.

Q: How demanding is the Ultra preset at 4K?

A: The Ultra preset at 3840x2160 produces an average of 21.7 FPS, which is below what is generally considered playable for an action-oriented survival game. This result is 38.2% lower than the 4K Medium score of 38.7 FPS, indicating that the jump to Ultra carries a severe performance penalty.

Q: Does the combo rank highly among all tested configurations?

A: No. The combo ranks 1398 out of 1718 tested combos for Palworld. This places it in the bottom 20% of all tested systems, suggesting that while it can run the game, many other combinations will deliver significantly higher frame rates.

How This Combo Ranks

The combination of the AMD Ryzen 5 7600 and AMD Radeon RX 6600 ranks 1398 out of 1718 tested combos for Palworld. This rank places the pairing in the 19th percentile of all tested systems, meaning that roughly 81% of tested combinations deliver higher average frame rates. The low rank is primarily attributable to the GPU, which sits in the 69th percentile of all GPUs, while the CPU is much stronger, sitting in the 83rd percentile of all CPUs.

This disparity indicates a significant bottleneck in the graphics subsystem. The CPU is capable of much higher performance, as evidenced by its 3DMark max threads score of 6503 and Cinebench R23 multicore score of 22992. The GPU, however, limits the system to the observed frame rates. The ranking suggests that users seeking higher performance in Palworld would benefit more from a GPU upgrade than a CPU upgrade, as the Ryzen 5 7600 is not the limiting factor in this configuration.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest results. The Low preset yields 139.3 FPS, Medium drops to 113.4 FPS, High produces 88.5 FPS, and Ultra bottoms out at 67 FPS. All four settings are above the 60 FPS threshold, making 1080p a fully playable resolution regardless of the graphical preset chosen.

At 2560x1440, performance remains respectable but starts to show strain. The Low preset achieves 89.7 FPS, which is a 35.6% drop from the 1080p Low score. Medium produces 74 FPS, High falls to 57.1 FPS, and Ultra drops to 46.2 FPS. The High and Ultra presets fall below the 60 FPS target, suggesting that users should select Medium for a consistently smooth experience at this resolution.

At 3840x2160, the GPU is clearly overburdened. The Low preset is the only one that approaches playability, with an average of 49.1 FPS. Medium produces 38.7 FPS, High drops to 34.9 FPS, and Ultra is practically unplayable at 21.7 FPS. The performance gap between Low and Ultra at 4K is 27.4 FPS, indicating that the graphical settings have a profound impact on the system's ability to render at this resolution.

Settings Recommendations

The measured data suggests that the High preset at 1080p offers the best balance of visual quality and performance. The 88.5 FPS result is well above the 60 FPS threshold and leaves headroom for demanding scenes. For users prioritizing frame rate, the Medium preset at 1080p provides a significant boost to 113.4 FPS with a modest visual compromise compared to High.

At 1440p, the Medium preset is the recommended choice, yielding 74 FPS. The High preset drops to 57.1 FPS, which may be acceptable for some users but risks stuttering in busy areas. Users with high-refresh-rate 1440p monitors should consider the Low preset at 89.7 FPS for maximum smoothness.

For 4K, the Low preset is the only viable option, delivering 49.1 FPS. The Medium preset at 38.7 FPS is borderline, and the Ultra preset at 21.7 FPS should be avoided. The data clearly shows that 4K gaming with this GPU requires significant compromises in graphical fidelity.

CPU Role

The AMD Ryzen 5 7600 is a 6-core, 12-thread processor based on the Zen 4 architecture, codenamed Raphael. It has a base clock of 3.80 GHz and a boost clock of 5.10 GHz. The CPU's synthetic benchmark scores are strong, with a Cinebench R23 multicore score of 22992 and a single-core score of 3246. Its 3DMark single-thread score of 999 and max threads score of 6503 further illustrate its balanced performance.

In Palworld, the CPU's role appears to be supportive rather than limiting. The measured FPS scaling with resolution changes indicates that the GPU is the bottleneck, as the frame rate drops significantly when the resolution increases while the CPU workload remains relatively constant. The CPU's 32 MB of shared L3 cache and 83.2 GB/s memory bandwidth provide adequate data throughput for the game's mechanics, which involve large open-world environments and numerous entities.

The CPU's 83rd percentile ranking among all CPUs, with an average benchmark score of 26617, places it in the upper tier of processors. Its nearest rival, the AMD Ryzen 7 5800X3D, scores nearly identically at 26574. This suggests that the Ryzen 5 7600 is more than capable of handling the game's logic, and any performance limitations in Palworld are not attributable to the processor.

GPU Role

The AMD Radeon RX 6600 is the definitive performance limiter in this configuration. It features 8 GB of GDDR6 memory on a 128-bit bus, providing 224.0 GB/s of bandwidth. The GPU has a base clock of 1626 MHz and a boost clock of 2491 MHz, with a game clock of 2044 MHz. Its 1792 shading units and 64 ROPs deliver a pixel rate of 159.4 GPixel/s and a texture rate of 279.0 GTexel/s.

The GPU's 69th percentile ranking among all GPUs, with an average benchmark score of 25235, places it in the mid-range segment. Its nearest rival, the AMD Radeon 890M, scores 25246, which is a 0% delta. This indicates that the RX 6600 is a solid performer for 1080p gaming but lacks the raw power for high-refresh-rate 1440p or 4K gaming.

The measured FPS data confirms this assessment. At 1080p, the GPU can deliver high frame rates, but the 4K results, particularly at Ultra settings (21.7 FPS), show that its 8 GB VRAM and 224.0 GB/s bandwidth are insufficient for the demands of Palworld at high resolutions. The GPU's 132 W TDP and dual-slot design are modest, but its performance ceiling is clearly defined by its memory subsystem and compute capabilities. Users should target 1080p or 1440p with adjusted settings to get the most out of this card.