Palworld

Palworld, the survival crafting phenomenon from early 2024, presents a unique challenge for the AMD Ryzen 5 7600 and Intel Arc B570 pairing. The data shows a system that is capable of delivering smooth gameplay at mainstream resolutions, but which hits a firm performance ceiling at higher fidelity settings. This analysis breaks down the measured FPS results across the three primary resolutions and four quality presets, offering a clear picture of what this specific hardware combination can achieve.

Resolution Scaling

The transition from 1080p to 4K reveals a classic case of the GPU becoming the primary bottleneck as pixel count increases, but the pattern is not uniform across all settings. At 1080p with Low settings, the system achieves an average of 130 FPS. Moving to 1440p Low drops that to 85 FPS, a 34.6% decrease, and then to 4K Low at 47 FPS, a further 44.7% decrease from the 1440p figure. This steep drop-off indicates that even at the lowest graphical preset, the Intel Arc B570 is being saturated by the sheer number of pixels at higher resolutions.

The scaling at Ultra settings is more severe, albeit from a lower starting point. The 1080p Ultra average is 61 FPS. At 1440p Ultra, the average falls to 40 FPS, a 34.4% reduction, and at 4K Ultra, it plummets to 22 FPS, which is a 45% drop from the 1440p result. This near-linear degradation at the highest preset emphasizes that the GPU's 10 GB of memory and 160-bit bus are overwhelmed by Palworld's Ultra settings at high resolutions.

Interestingly, the data suggests that the Ryzen 5 7600 is not the limiting factor in most scenarios. The 130 FPS average at 1080p Low shows that the CPU can feed the GPU with enough data to maintain high frame rates. However, the performance cliff between 1440p and 4K across all settings points directly to the GPU. The B570's 380.0 GB/s memory bandwidth and 11.52 TFLOPS of FP32 compute simply cannot handle the increased workload of 4K, regardless of whether the preset is Low or Ultra. The system is well-balanced for 1080p, but at 4K, the GPU becomes the definitive constraint, making the resolution scaling pattern a textbook example of GPU-bound performance.

FAQ

Q: What is the highest average FPS this combo can achieve at 1080p?

A: The best result comes from the Low preset, which yields a 130 FPS average. The Medium preset is also above 100 FPS, with a 105 average.

Q: Is the AMD Ryzen 5 7600 bottlenecking the Intel Arc B570 in this game?

A: Benchmark results indicate no significant CPU bottleneck. The CPU, which scores in the 78th percentile of all tested processors, allows the system to reach 130 FPS at 1080p Low, indicating it can keep up with the GPU's output at lower resolutions.

Q: Can this system handle 4K gaming in Palworld?

A: Yes, but with limitations. At 4K Low, it achieves a 47 FPS average, which is playable but not ideal for fast-paced action. At 4K Medium, the average drops to 38 FPS, and at 4K High, it falls to 30 FPS. The 4K Ultra preset averages only 22 FPS, which is not a smooth experience.

Q: How does the Intel Arc B570 compare to its closest rivals in synthetic benchmarks?

A: The B570's average benchmark score is 20556, placing it in the 65th percentile of all GPUs. It is nearly identical to the Intel Arc A750, which scores 20582 (a 0.1% difference), and the NVIDIA GeForce RTX 3070 Mobile, which scores 20534 (a 0.1% difference).

Q: What is the difference in performance between the Low and Ultra presets at 1440p?

A: The gap is substantial. The Low preset averages 85 FPS, while the Ultra preset averages just 40 FPS. This represents a 53% reduction in average frame rate when moving from the lowest to the highest quality setting.

Q: What is the minimum FPS recorded for the Medium preset?

A: The minimum FPS is 33 at 4K, 59 at 1440p, and 89 at 1080p. These figures suggest that the Medium preset is the most stable in terms of frame time consistency at all resolutions except 4K, where it can dip below 40 FPS.

GPU Role

The Intel Arc B570's role in this pairing is defined by its memory configuration and clock speeds. The GPU features 10 GB of GDDR6 memory on a 160-bit bus, providing a bandwidth of 380.0 GB/s. In Palworld, a game with large, open environments and many dynamic objects, this memory subsystem is crucial. The data suggests that at 4K and at Ultra settings, the 10 GB capacity can become a limiting factor, contributing to the steep performance drops observed.

The B570's base and boost clocks are both set at 2500 MHz. This consistent clock speed is paired with 2304 shading units and 144 TMUs, which work together to produce a texture rate of 360.0 GTexel/s. In practice, this means the GPU excels at handling the game's stylized textures and effects at 1080p and 1440p, but the raw pixel throughput at 4K (200.0 GPixel/s) is insufficient to maintain high frame rates. The data shows a clear correlation: as the resolution increases, the GPU's fill-rate limitations become more apparent, with the average FPS at 4K High (30) being less than half of that at 1080p High (81).

The GPU's compute performance of 11.52 TFLOPS FP32 is another key indicator. While this is sufficient for DirectX 12 workloads in Palworld, the game's physics and simulation systems can be demanding. The measured results show that the GPU's capabilities are best utilized at 1080p, where it can deliver average FPS in the 60-130 range depending on the preset. At 1440p, it remains capable, but the Ultra preset starts to strain the GPU, resulting in the 40 FPS average. The data positions the B570 as a strong 1080p and capable 1440p card for this title, but it clearly lacks the reserves needed for a smooth 4K experience.

Settings Recommendations

Based on the measured FPS data, the optimal experience for this AMD Ryzen 5 7600 and Intel Arc B570 combo depends heavily on the target resolution. For 1080p gaming, the High preset is the recommended choice. It delivers an average of 81 FPS, which is well above the 60 FPS threshold for smooth gameplay, while providing a significant visual upgrade over the Medium preset. The Medium preset at 105 FPS is also excellent if players prefer higher frame rates, but High offers the best balance of fidelity and performance. The Ultra preset at 61 FPS is playable, but the jump in visual quality from High may not justify the 20 FPS average drop.

At 1440p, the Medium preset is the clear sweet spot. It averages 69 FPS with a minimum of 59 FPS, ensuring a mostly stable experience. The High preset drops to a 53 FPS average, which is still playable but less consistent. The Low preset, at 85 FPS, is the only option for those seeking 60+ FPS consistently, but it sacrifices too much visual detail. The Ultra preset, at 40 FPS, is not recommended for a comfortable gameplay experience.

For 4K, the options are limited. The Low preset, with a 47 FPS average, is the only setting that approaches playability. The Medium preset at 38 FPS and High at 30 FPS will feel sluggish, and Ultra at 22 FPS is effectively a slideshow. Players targeting 4K should be prepared to use the Low preset and accept the reduced visual quality, as no settings combination provides a solid 60 FPS experience at this resolution. The data strongly suggests that 1080p or 1440p are the intended resolutions for this hardware.

How This Combo Ranks

In the comprehensive database of tested hardware combinations, this pairing of the AMD Ryzen 5 7600 and Intel Arc B570 achieves a rank of 2362 out of 2944 tested combos in Palworld. This places it in the bottom 20% of all configurations, which is a surprising result given the individual component scores. The CPU is a strong performer, ranking in the 78th percentile of all CPUs, while the GPU ranks in the 65th percentile of all GPUs. The low overall combo ranking suggests that the pairing is less synergistic than their individual scores might imply.

The data indicates that the combo's ranking is dragged down by the GPU's performance ceiling in this specific title. While the CPU is powerful enough to drive the GPU at lower resolutions, the B570's limitations at higher settings and resolutions cap the overall system performance. This is reflected in the benchmark scores: the CPU's nearest rival, the AMD Ryzen 9 6900HX, is only 0.2% faster, and the GPU's nearest rival, the Intel Arc A750, is only 0.1% faster. This shows that neither component is a particularly strong or weak outlier in isolation, but their combined performance in Palworld is below average compared to other systems with similar or better component pairings. The rank of 2362 serves as a caution that for this game, the GPU is a significant bottleneck that prevents the system from achieving a higher overall standing.

Measured FPS Breakdown

The following is a complete breakdown of the measured average FPS for the AMD Ryzen 5 7600 and Intel Arc B570 combination in Palworld, across all tested resolutions and settings.

1080p (1920x1080):

• Low: 130 FPS average.
• Medium: 105 FPS average, with a minimum of 89 FPS and a maximum of 121 FPS.
• High: 81 FPS average.
• Ultra: 61 FPS average.

1440p (2560x1440):

• Low: 85 FPS average.
• Medium: 69 FPS average, with a minimum of 59 FPS and a maximum of 80 FPS.
• High: 53 FPS average.
• Ultra: 40 FPS average.

4K (3840x2160):

• Low: 47 FPS average.
• Medium: 38 FPS average, with a minimum of 33 FPS and a maximum of 44 FPS.
• High: 30 FPS average.
• Ultra: 22 FPS average.

The data confirms that the system is most comfortable at 1080p, where it can hit high frame rates on any preset. At 1440p, it remains viable, but the Ultra preset is not recommended for a consistent experience. At 4K, the system is only marginally playable on the Low preset, making it unsuitable for high-fidelity gaming. These measured figures provide a definitive guide for what users can expect from this hardware configuration in Palworld.