Palworld
This combination provides smooth gameplay with an average of 68 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 23 | 30 | 43 | 49 |
| 1440p QHD | 45 | 55 | 75 | 90 |
| 1080p Full HD | 66 | 85 | 114 | 142 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with AMD Ryzen 5 7600X + AMD Radeon RX 6600, In-Depth Analysis
Palworld with the AMD Ryzen 5 7600X and AMD Radeon RX 6600 is a pairing that lands in the 1416th spot out of 1718 tested combinations for this game, placing it in the lower half of the field. The data shows a system that can handle the game comfortably at lower resolutions and settings, but one that will require careful settings management to maintain smooth frame rates at higher demands. This analysis breaks down exactly where the bottlenecks are and which settings deliver the best experience.
Resolution Scaling
The measured FPS data shows a classic pattern of GPU-bound scaling as resolution increases. At 1080p with High settings, the system produces 84.5 FPS. Moving to 1440p drops that to 54.9 FPS, a 35% reduction, and 4K High falls to 29.8 FPS, a 65% reduction from the 1080p baseline. This steep decline indicates that the Radeon RX 6600 is the primary limiting factor once you step beyond 1080p.
The gap between 1440p and 4K is particularly telling. At Medium settings, 1440p delivers 74.6 FPS while 4K manages 42.7 FPS, a 43% loss. The Ultra preset shows the same pattern with 45 FPS at 1440p dropping to 23.4 FPS at 4K. These numbers confirm that the GPU's 8 GB memory buffer and 128-bit bus are being saturated at higher resolutions, and the 224.0 GB/s bandwidth simply cannot feed enough data to maintain playable rates at 4K.
At 1080p, however, the scaling behavior changes. The jump from Low to High settings at 1080p only drops performance from 141.5 FPS to 84.5 FPS. This suggests that at 1080p the CPU has enough headroom to keep up, and the frame rate is more dependent on the GPU's raw compute power. The 1080p Low result of 141.5 FPS demonstrates that the CPU is not holding back the system, as it can push far beyond typical display refresh rates when the GPU load is light.
GPU Role
The AMD Radeon RX 6600 is built on the RDNA 2.0 architecture with a Navi 23 chip on a 7 nm process. It has 8 GB of GDDR6 memory on a 128-bit bus, providing 224.0 GB/s of bandwidth. The card's clocks are listed with a base of 1626 MHz, a game clock of 2044 MHz, and a boost clock of 2491 MHz. These specifications point to a card designed for 1080p gaming, and the Palworld results align with that expectation.
The GPU's benchmark scores place it in the 69th percentile of all GPUs, with its nearest rival being the AMD Radeon 890M at a 0% delta. The RX 6600's 3DMark Steel Nomad DX12 score of 1492 and Passmark G3D score of 15096 reflect its mid-range positioning. In Palworld specifically, the card's performance at 1440p High (54.9 FPS) and 4K High (29.8 FPS) shows that it is fundamentally a 1080p-oriented card, though it can handle 1440p with settings compromises.
The VRAM situation is worth noting. With 8 GB of GDDR6, the card has enough memory for 1080p and most 1440p scenarios in this game. However, the measured 4K performance suggests that memory bandwidth, not just capacity, is a constraint. The 224.0 GB/s bandwidth is relatively modest, and at 4K the card drops to 23.4 FPS on Ultra, indicating the memory subsystem is overwhelmed by the data demands of high-resolution textures and effects.
CPU Role
The AMD Ryzen 5 7600X is a 6-core, 12-thread processor based on the Zen 4 architecture (Raphael codename) on a 5 nm process. It has a base clock of 4.70 GHz and a boost clock of 5.30 GHz, with 32 MB of shared L3 cache. The CPU's benchmark results are strong, with a Cinebench R23 multicore score of 24128 and a single-core score of 3406. Its Passmark multithread score of 28390 and single-thread score of 4135 confirm that this is a capable gaming processor.
In Palworld, the CPU's role appears secondary to the GPU. At 1080p Low, the system reaches 141.5 FPS, which is likely near the CPU's practical limit for this game given its thread usage. The CPU's percentile ranking of 83rd among all CPUs, with its nearest rival being the AMD Ryzen 7 5700X at a 0.2% delta, shows it is well above average. The 3DMark 16-thread score of 6879 and max-thread score of 6845 indicate that the CPU scales well with multi-threaded loads, though Palworld's performance is more likely tied to single-thread performance.
The data suggests that at 1080p, the CPU is not the bottleneck. The system can push 141.5 FPS on Low settings, and even at High settings it maintains 84.5 FPS. The bottleneck becomes apparent at higher resolutions where the GPU's limitations dominate. This is a balanced pairing where the CPU has enough headroom to feed the GPU at 1080p, but the GPU becomes the limiting factor at 1440p and 4K.
FAQ
Q: Can this system run Palworld at 4K?
A: Technically yes, but not well. The measured results show 29.8 FPS at 4K High and 23.4 FPS at 4K Ultra. Only 4K Low reaches a playable 49 FPS, and even that is below the 60 FPS target most gamers prefer.
Q: What is the best resolution for this combination?
A: 1080p is clearly the sweet spot. The system delivers 84.5 FPS at High, 114.4 FPS at Medium, and 141.5 FPS at Low. All of these are above 60 FPS, with Medium and Low exceeding 100 FPS.
Q: How does the CPU compare to its rivals?
A: The Ryzen 5 7600X has an average benchmark score of 26272, placing it in the 83rd percentile. Its nearest rival is the AMD Ryzen 7 PRO 6850U with a 0% delta, followed by the AMD Ryzen 7 7735U at -0.1%. The AMD Ryzen 7 5700X is slightly ahead at 0.2%.
Q: Is the GPU comparable to an RTX 3060 Ti?
A: In raw benchmark terms, the RX 6600's average score of 25235 is 0.5% ahead of the NVIDIA GeForce RTX 3060 Ti's 25120. However, in Palworld, the actual performance will depend on resolution and settings, with the RX 6600's 8 GB memory and bandwidth being potential limitations.
Q: What settings should be avoided?
A: The Ultra preset at 4K should be avoided entirely, as it produces only 23.4 FPS. Even at 1440p, Ultra drops to 45 FPS, which is borderline. The data indicates that High is the highest preset that maintains playable frame rates at 1080p and 1440p.
Q: Does the CPU hold back the GPU in this game?
A: At 1080p, the evidence suggests the CPU is not the limiting factor. The system reaches 141.5 FPS on Low settings, which is well beyond typical monitor refresh rates. The GPU becomes the bottleneck at 1440p and 4K, as shown by the steep FPS drops.
Measured FPS Breakdown
The measured FPS data provides a complete picture of performance across resolutions and settings.
At 1920x1080, the system performs admirably. Low settings deliver 141.5 FPS, Medium produces 114.4 FPS, High drops to 84.5 FPS, and Ultra maintains 66.1 FPS. Every preset at this resolution exceeds 60 FPS, making 1080p the most versatile resolution for this combination.
At 2560x1440, performance becomes more variable. Low settings still provide a smooth 90.4 FPS, and Medium delivers a respectable 74.6 FPS. High drops to 54.9 FPS, which is below the 60 FPS threshold but still playable for many users. Ultra falls to 45 FPS, which may be too choppy for action-heavy gameplay.
At 3840x2160, the GPU clearly struggles. Low settings produce 49 FPS, Medium drops to 42.7 FPS, High falls to 29.8 FPS, and Ultra bottoms out at 23.4 FPS. None of these results are ideal for a smooth experience, though Low at 4K could be acceptable for slower-paced exploration.
Settings Recommendations
Based on the measured data, the best experience for this system is at 1080p with Medium or High settings. Medium at 1080p delivers 114.4 FPS, which is smooth and leaves headroom for demanding scenes. High at 1080p provides 84.5 FPS, which is still above 60 FPS and offers better visual quality. For players who prioritize frame rate above all else, Low at 1080p achieves 141.5 FPS.
At 1440p, the recommended settings are Low or Medium. Low at 1440p produces 90.4 FPS, which is excellent for a higher resolution. Medium at 1440p drops to 74.6 FPS, still above 60 FPS and a good balance of quality and performance. High at 1440p (54.9 FPS) is playable but may cause noticeable stutters in busy areas, while Ultra (45 FPS) should be avoided.
For 4K, the only viable option is Low settings at 49 FPS. This falls short of 60 FPS but is playable for casual sessions. Medium at 4K (42.7 FPS) and High at 4K (29.8 FPS) are too slow for a responsive experience, and Ultra at 4K (23.4 FPS) is effectively unplayable. The data strongly suggests that 4K is not a realistic target for this hardware in Palworld.
The Ultra preset is the least efficient option across all resolutions. At 1080p, it delivers 66.1 FPS, which is only 22% lower than High but likely offers diminishing visual returns. At 1440p, Ultra drops to 45 FPS, a 18% reduction from High, and at 4K it falls to 23.4 FPS. The performance cost of Ultra is disproportionate to its visual benefit, making High the better choice for most users.
Hardware Specifications
AMD Ryzen 5 7600X
AMD Radeon RX 6600
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7600X + AMD Radeon RX 6600 in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 49.0 |
| 3840x2160 | Medium | 42.7 |
| 3840x2160 | High | 29.8 |
| 3840x2160 | Ultra | 23.4 |
| 2560x1440 | Low | 90.4 |
| 2560x1440 | Medium | 74.6 |
| 2560x1440 | High | 54.9 |
| 2560x1440 | Ultra | 45.0 |
| 1920x1080 | Low | 141.5 |
| 1920x1080 | Medium | 114.4 |
| 1920x1080 | High | 84.5 |
| 1920x1080 | Ultra | 66.1 |
Palworld with Ryzen 5 7600X + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RX 6600 + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with Ryzen 5 7600X + RX 6600
Explore FPS benchmarks for other games using this same hardware combination.