Overpower

The AMD Ryzen 7 5700G and Intel Arc B570 pairing delivers a mid-pack performance profile in Overpower, landing at rank 2373 out of 2980 tested combos. The data reveals a system that scales predictably with resolution and settings, where the GPU’s 10 GB VRAM and the CPU’s eight Zen 3 cores interact in ways that define the experience across the board.

Resolution Scaling

The measured FPS data shows a clear and consistent decline as resolution increases from 1920x1080 to 3840x2160, with the gap between Low and Ultra settings widening at higher pixel counts. At 1080p Low, the combo averages 110 FPS, which drops to 98 FPS at 1440p Low and further to 84 FPS at 4K Low — a 23.6% reduction from 1080p to 4K at the lowest settings. This relatively modest percentage drop at Low settings indicates that the CPU is still able to feed the GPU adequately even as pixel count quadruples.

However, the story changes dramatically when settings are raised. At Ultra settings, the average FPS falls from 53 at 1080p to 47 at 1440p and finally to 40 at 4K. The percentage loss from 1080p to 4K at Ultra is 24.5%, which is similar to the Low setting percentage, but the absolute numbers reveal a system that is struggling to maintain frame rates in the playable range at higher resolutions. The 4K Ultra result of 40 FPS is below the 60 FPS threshold that many games target, suggesting that this combo is best suited for 1080p or 1440p gaming with adjusted settings.

The Medium settings data provides the most complete picture, as it includes both minimum and maximum FPS values. At 1080p Medium, the average is 69 FPS with a minimum of 59 and maximum of 79. Moving to 1440p Medium drops the average to 62 FPS (minimum 52, maximum 71), and 4K Medium averages 52 FPS (minimum 44, maximum 60). The minimum FPS values at 4K Medium dip to 44, which indicates occasional stutters during intense scenes. The spread between minimum and maximum FPS narrows slightly as resolution increases, suggesting that the GPU becomes the more consistent bottleneck at higher resolutions.

The scaling pattern points to a GPU-bound system at 4K and a more balanced configuration at 1080p. At Low settings, the 1080p to 1440p drop is 10.9%, while the 1440p to 4K drop is 14.3%. This non-linear scaling suggests that the Arc B570’s 380.0 GB/s memory bandwidth and 160-bit bus are sufficient for lower resolutions but begin to limit performance as pixel throughput demands increase. The CPU’s 16 MB L3 cache and dual-channel DDR4 memory bandwidth of 51.2 GB/s appear adequate for feeding frames at 1080p, but they are not the primary constraint at higher resolutions.

GPU Role

The Intel Arc B570 is built on the Xe2-HPG architecture with a 5 nm process from TSMC, featuring 19,600 million transistors on a 272 mm² die. Its 10 GB of GDDR6 memory on a 160-bit bus provides 380.0 GB/s of bandwidth, which is a critical resource for Overpower’s texture-heavy environments. The GPU’s base and boost clocks are both listed at 2500 MHz, with memory running at 2375 MHz (19 Gbps effective). This translates to 11.52 TFLOPS of FP32 compute, backed by 2304 shading units, 144 TMUs, and 80 ROPs.

The 10 GB VRAM capacity is notable because Overpower’s Ultra settings at 4K push the GPU to its limits. The measured 40 FPS average at 4K Ultra suggests that the GPU is hitting both memory capacity and bandwidth constraints. The fact that 4K Low achieves 84 FPS while 4K Ultra drops to 40 FPS — a 52.4% reduction — indicates that the game’s higher settings increase memory pressure and shading complexity beyond what the B570 can comfortably handle at high resolutions.

Benchmark results from the FACT PACK show the B570 scoring 14195 in Passmark G3D and 2649 in 3DMark Steel Nomad DX12. Its Geekbench OpenCL score of 83514 and Vulkan score of 96844 demonstrate solid compute capabilities. The GPU’s percentile rank of 65 among all GPUs places it in the upper-midrange, and its nearest rivals include the NVIDIA GeForce RTX 3070 Mobile (deltaPct 0.1) and Intel Arc A750 (deltaPct -0.1). This close proximity to the RTX 3070 Mobile in average benchmark scores suggests the B570 delivers comparable raw performance, though the desktop RTX 3070 typically has higher memory bandwidth. The 150 W TDP and 450 W suggested PSU indicate this is a power-efficient card that doesn’t require an excessive power supply.

The GPU’s 18 ray tracing cores are present, but Overpower is primarily an action game where rasterization performance takes precedence. The pixel rate of 200.0 GPixel/s and texture rate of 360.0 GTexel/s provide the fill rate needed for the game’s visual effects at 1080p and 1440p, but these rates become limiting factors at 4K where the 8.3 million pixels per frame demand more from the ROPs.

CPU Role

The AMD Ryzen 7 5700G is a Zen 3 (Cezanne) processor built on TSMC’s 7 nm process, featuring 8 cores and 16 threads. Its base clock of 3.80 GHz boosts to 4.60 GHz, and it carries 16 MB of L3 cache plus 512 KB L2 per core. The CPU’s 65 W TDP is modest, and it uses DDR4 memory in dual-channel configuration. The 5700G’s integrated Radeon Vega 8 graphics are present but irrelevant in this configuration with the dedicated Arc B570.

In CPU benchmarks, the 5700G scores 12830.5 in Cinebench R23 multicore and 1494 in single-core, with a Geekbench multicore score of 9950 and single-core of 1894. Its 3DMark 16-thread score of 6629 and max-thread score of 6627 show consistent scaling across thread counts. The CPU’s percentile rank of 79 among all CPUs places it above the GPU’s percentile of 65, indicating that the processor has more headroom relative to its peers than the graphics card does.

The nearest CPU rivals in the FACT PACK include the Intel Core i9-9900K (deltaPct -0.2), AMD Ryzen AI 7 445 (deltaPct 0.4), Intel Core i5-14400T (deltaPct -0.4), and Intel Core i7-1370P (deltaPct 0.6). The 5700G’s average benchmark score of 27051 is nearly identical to the i9-9900K’s 27097, showing that this 5000-series chip holds its own against older flagship processors. This CPU strength is reflected in the Overpower results at 1080p, where the 110 FPS Low setting average demonstrates that the CPU can push frames well above 100 when the GPU isn’t the bottleneck.

However, the CPU’s PCIe Gen 3 interface (16 lanes) could theoretically limit data transfer to the GPU, which uses PCIe 4.0 x8. In practice, the measured FPS data suggests this isn’t a significant constraint, as the system scales predictably with resolution. The CPU’s boost clock of 4.60 GHz provides solid single-thread performance for game logic, while the 8-core/16-thread configuration handles background tasks and multi-threaded game workloads without issue. The Passmark single-thread score of 3283 and multithread score of 24419 indicate balanced performance across both metrics.

FAQ

*Q: What is the best resolution to play Overpower with this combo?*

A: The data shows 1080p is the strongest performer, with averages ranging from 110 FPS (Low) to 53 FPS (Ultra). At 1440p, the range is 98 FPS (Low) to 47 FPS (Ultra), while 4K drops to 84 FPS (Low) and 40 FPS (Ultra). For consistent frame rates above 60 FPS, 1080p Medium (69 FPS) or 1440p Low (98 FPS) are the best options.

Q: How does the GPU compare to its closest rivals?

A: The Intel Arc B570’s average benchmark score is 20556, which is 0.1% above the NVIDIA GeForce RTX 3070 Mobile (20534) and 0.1% below the Intel Arc A750 (20582). Its percentile rank of 65 places it in the upper-midrange of all GPUs.

Q: Is the CPU or GPU the limiting factor in this system?

A: The data suggests the GPU becomes the primary bottleneck at higher resolutions. At 4K Ultra, the system manages 40 FPS, while at 1080p Low it reaches 110 FPS. The CPU’s percentile rank (79) is higher than the GPU’s (65), indicating the processor has more relative headroom.

Q: What are the minimum FPS values for this combo?

A: The only settings with reported minimum FPS are Medium: 59 FPS at 1080p, 52 FPS at 1440p, and 44 FPS at 4K. These minimums show that even at Medium settings, 4K can dip below 45 FPS during demanding scenes.

Q: How much performance is lost when moving from 1080p to 4K?

A: At Low settings, the drop is from 110 FPS to 84 FPS (23.6% reduction). At Ultra settings, the drop is from 53 FPS to 40 FPS (24.5% reduction). The percentage loss is consistent across settings, but the absolute frame rate becomes less playable at higher resolutions.

Q: What is the combo’s overall ranking among tested systems?

A: The combo ranks 2373 out of 2980 tested combinations, placing it in the lower-midrange of all systems tested. This reflects the GPU’s midrange positioning and the CPU’s older DDR4 platform.

How This Combo Ranks

The combo’s rank of 2373 out of 2980 places it in the 20th percentile of tested systems, meaning roughly 80% of combinations outperform it. This ranking is somewhat surprising given the CPU’s respectable 79th percentile score, but the GPU’s 65th percentile rank drags the overall performance down. The rank suggests that while the 5700G is a capable processor, pairing it with the B570 doesn’t create a synergistic high-performance combination.

The near-identical average benchmark scores of the CPU versus its rivals (i9-9900K, Ryzen AI 7 445, i5-14400T, i7-1370P) indicate that the 5700G’s processing power is competitive with newer and older options. However, the GPU’s closest rivals — the RTX 3070 Mobile and Arc A750 — are themselves midrange performers. This combination of a solid CPU and midrange GPU results in the 2373rd rank, which is consistent with the measured FPS data showing playable but not exceptional performance.

Compared to the 607 combinations that rank below it, this system offers a baseline level of gaming capability. The measured FPS at 1080p Medium (69 FPS) and High (64 FPS) are respectable for mainstream gaming, while the 4K results (40-84 FPS depending on settings) show that the system can handle 4K at lower settings but struggles with Ultra. The rank reflects a system that is balanced but not optimized for maximum performance, likely due to the GPU’s midrange positioning and the CPU’s older DDR4 memory platform.

Measured FPS Breakdown

The measured FPS data covers three resolutions (1920x1080, 2560x1440, 3840x2160) and four settings levels (Low, Medium, High, Ultra), with 12 total data points. Medium settings are the only configuration with both minimum and maximum FPS values reported.

At 1920x1080, the combo achieves its highest performance: 110 FPS on Low, 69 FPS on Medium (min 59, max 79), 64 FPS on High, and 53 FPS on Ultra. The gap between Low and Ultra is 57 FPS, which is the largest spread across all resolutions. This indicates that at 1080p, the GPU has enough headroom to scale with settings, and the CPU can maintain high frame rates even when the GPU is fully utilized.

At 2560x1440, performance drops noticeably: 98 FPS on Low, 62 FPS on Medium (min 52, max 71), 57 FPS on High, and 47 FPS on Ultra. The Low to Ultra gap narrows to 51 FPS, suggesting the GPU is beginning to limit the highest settings. The High setting (57 FPS) is just below the 60 FPS threshold, making it a borderline choice for smooth gameplay.

At 3840x2160, the system shows its weakest results: 84 FPS on Low, 52 FPS on Medium (min 44, max 60), 49 FPS on High, and 40 FPS on Ultra. The Low to Ultra gap narrows further to 44 FPS, confirming that the GPU is the primary constraint at 4K. The Medium setting’s minimum of 44 FPS indicates that even mid-range settings can produce stutters at 4K.

The scaling from 1080p to 4K at each setting is consistent: Low loses 26 FPS, Medium loses 17 FPS, High loses 15 FPS, and Ultra loses 13 FPS. This pattern shows that higher settings suffer less absolute FPS loss when resolution increases, because the GPU is already heavily loaded at lower resolutions. However, the relative performance at 4K Ultra (40 FPS) is far below the 1080p Low result (110 FPS), reinforcing that this combo is best used at 1080p or 1440p with moderate settings.