Overpower
This combination provides smooth gameplay with an average of 70 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 42 | 50 | 57 | 89 |
| 1440p QHD | 52 | 59 | 67 | 108 |
| 1080p Full HD | 55 | 68 | 72 | 116 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Overpower with AMD Ryzen 7 5700G + AMD Radeon RX 6600, In-Depth Analysis
Resolution Scaling
The measured FPS data for Overpower shows a clear pattern: this combo is heavily GPU-limited at higher resolutions, while the CPU has enough headroom to keep frame rates respectable at 1080p. Moving from 1920x1080 to 2560x1440 at High settings drops the average from 68.4 FPS to 58.8 FPS, a reduction of roughly 14%. The jump from 1440p to 4K (3840x2160) is more punishing, with High settings falling to 49.7 FPS — a further 15% decline. This scaling behavior indicates that the Radeon RX 6600's 8 GB frame buffer and 128-bit memory interface become the primary constraint as pixel count rises.
At Low settings, the story is different. The 1080p Low result of 116.1 FPS drops to 108.1 FPS at 1440p, a mere 7% penalty. Even at 4K Low, the combo still delivers 88.9 FPS, which is only 23% below the 1080p Low figure. This relatively mild scaling at Low settings suggests that the CPU (Ryzen 7 5700G) and the GPU's raw compute are both sufficient when graphical load is minimized; the bottleneck shifts decisively to the GPU only when texture quality and shading complexity increase.
The Ultra preset tells the clearest story. At 1080p Ultra, the combo manages 55 FPS, but 1440p Ultra drops to 52.4 FPS and 4K Ultra falls to 42.1 FPS. The delta between 1080p and 4K at Ultra is 23%, which is nearly identical to the scaling seen at Low settings. However, the absolute numbers are far lower, indicating that Ultra settings push the GPU to its limits regardless of resolution. The data suggests that for smooth 4K gameplay, only Low settings are viable, while 1440p and 1080p offer more flexibility across the preset range.
GPU Role
The AMD Radeon RX 6600 is the dominant factor in Overpower's performance, particularly at higher resolutions and quality presets. Its 8 GB of GDDR6 memory on a 128-bit bus provides 224.0 GB/s of bandwidth, which proves adequate for 1080p and 1440p but becomes a limiting factor at 4K with High or Ultra settings. The GPU's boost clock of 2491 MHz and game clock of 2044 MHz are relatively high for the RX 6000 series, yet the measured data shows that even at 1080p Ultra, the card cannot maintain 60 FPS, settling at 55 FPS.
The GPU's nearest rival, the AMD Radeon 890M, scores nearly identically (25246 vs. 25235 average benchmark score, a 0% delta), while the RX 580 2048SP trails by 0.2% and the RX 6700M leads by 0.2%. This tight grouping indicates that the RX 6600 sits at a performance plateau where small architectural differences matter more than raw specs. In Overpower specifically, the GPU's 1792 shading units and 64 ROPs deliver 159.4 GPixel/s, which translates to the observed frame rates. At 4K High, the 49.7 FPS average is close to the 42.1 FPS at Ultra, suggesting that the GPU's memory subsystem is saturated beyond a certain quality threshold.
The GPU's percentile rank of 69 among all GPUs places it in the upper third, and the benchmark results confirm this positioning. The DirectX 12 score of 51 and DirectX 11 score of 152 from Passmark indicate that the card handles modern APIs competently, which aligns with the game's 2023 release date and its likely reliance on DirectX 12 Ultimate features. The 28 ray tracing cores are present but do not meaningfully affect the measured results, as the data shows no ray-traced workload.
FAQ
Q: What is the best resolution for 60+ FPS with this combo?
A: At 1080p Low, the combo achieves 116.1 FPS, and at 1440p Low it reaches 108.1 FPS. For 60+ FPS at higher quality, 1080p High (68.4 FPS) and 1440p High (58.8 FPS) are close, but only 1080p High comfortably exceeds 60 FPS.
Q: Can this combo handle 4K gaming in Overpower?
A: Yes, but only at Low settings, where it averages 88.9 FPS. At Medium, 4K drops to 57.3 FPS, High to 49.7 FPS, and Ultra to 42.1 FPS, none of which are ideal for smooth gameplay.
Q: How does the CPU affect performance in this game?
A: The Ryzen 7 5700G with 8 cores and 16 threads appears to provide sufficient headroom, as frame rates scale primarily with GPU settings rather than resolution changes at Low presets. The CPU's 3DMark single-thread score of 899 and multi-thread score of 6629 suggest it is not the limiting factor.
Q: What is the FPS difference between Low and Ultra at 1080p?
A: Low averages 116.1 FPS, while Ultra averages 55 FPS, a difference of 61.1 FPS. This represents a 53% performance drop when moving from the lowest to the highest quality preset.
Q: Is the 8 GB VRAM sufficient for Overpower?
A: The data indicates yes for most settings, but 4K Ultra and High show significant drops (42.1 and 49.7 FPS respectively), suggesting the 8 GB buffer and 224.0 GB/s bandwidth are stressed at those configurations.
Q: How does this combo rank relative to other tested systems?
A: It ranks 1446 out of 1744 tested combos, placing it in the lower third of all configurations for this game, despite the GPU's 69th percentile overall.
How This Combo Ranks
The Ryzen 7 5700G + RX 6600 combination ranks 1446 out of 1744 tested combos in Overpower, placing it in the bottom 17% of configurations. This ranking is lower than the individual component percentiles might suggest, as the CPU sits at the 83rd percentile and the GPU at the 69th percentile. The discrepancy indicates that Overpower is particularly demanding on the GPU, and the RX 6600's mid-range positioning becomes more apparent in this title.
The combo's rank is likely dragged down by the 4K results, where the GPU's memory bandwidth and VRAM capacity are insufficient for high-fidelity settings. At 1080p, the combo performs respectably, but the rank reflects performance across all measured resolutions and settings. The nearest rival combos are not listed in the data, but the GPU's nearest rivals — the RX 6700M (0.2% faster) and RTX 3060 Ti (0.5% faster) — suggest that other combinations with similar GPUs would likely rank similarly. The 1446th position out of 1744 indicates that a large number of systems outperform this pairing, particularly at higher resolutions where the GPU's limitations are exposed.
Measured FPS Breakdown
At 1920x1080, the combo delivers its strongest results. Low settings average 116.1 FPS, Medium drops to 71.7 FPS, High to 68.4 FPS, and Ultra to 55 FPS. The gap between Low and Medium is substantial (44.4 FPS), while the difference between Medium and High is minimal (3.3 FPS), suggesting that Medium and High settings impose similar GPU loads. Ultra adds a further 13.4 FPS penalty over High, indicating a significant quality jump.
At 2560x1440, the pattern shifts. Low averages 108.1 FPS, which is only 8 FPS below the 1080p Low result. Medium falls to 66.9 FPS, High to 58.8 FPS, and Ultra to 52.4 FPS. The scaling from 1080p to 1440p is mild at Low (7%) but more pronounced at Medium (6.7% drop), High (14% drop), and Ultra (4.7% drop). Interestingly, the Ultra preset shows the smallest relative decline, suggesting that at Ultra settings, the GPU is already near its limit at 1080p.
At 3840x2160, the GPU's constraints become evident. Low averages 88.9 FPS, Medium 57.3 FPS, High 49.7 FPS, and Ultra 42.1 FPS. The drop from 1440p to 4K is steepest at Medium (14.4% decline) and High (15.5% decline), while Low (17.8% decline) and Ultra (19.7% decline) show slightly larger absolute reductions. The 4K Low result of 88.9 FPS is the only 4K configuration that exceeds 60 FPS, making it the only viable 4K option for smooth gameplay.
Settings Recommendations
For 1080p gaming, the data supports High settings as the best balance. The 68.4 FPS average at High is above the 60 FPS threshold, while Medium (71.7 FPS) offers only a marginal improvement of 3.3 FPS, and Ultra (55 FPS) falls below 60 FPS. The visual quality gain from High to Ultra is not worth the 13.4 FPS penalty, given that High already provides a playable experience.
For 1440p, the choice is between Low (108.1 FPS) and Medium (66.9 FPS). Medium is the only preset above 60 FPS besides Low, and it offers a meaningful quality improvement over Low. High (58.8 FPS) is just below 60 FPS, and Ultra (52.4 FPS) is not recommended. For players with 144Hz displays, Low is the only preset that can approach that refresh rate, but for standard 60Hz displays, Medium is the optimal choice.
For 4K, only Low (88.9 FPS) is playable. Medium (57.3 FPS) is close to 60 FPS but may suffer from frame pacing issues, while High (49.7 FPS) and Ultra (42.1 FPS) are too slow for action gameplay. The data suggests that 4K owners should either accept Low settings or reduce the resolution to 1440p for better quality. The GPU's 8 GB VRAM appears to be the limiting factor at 4K, as the 224.0 GB/s bandwidth cannot sustain high-quality textures at that pixel count.
CPU Role
The Ryzen 7 5700G plays a supporting role in Overpower, providing enough processing power to avoid bottlenecking the GPU at most settings. With 8 cores and 16 threads based on the Zen 3 architecture (Cezanne), the CPU offers solid multi-threaded performance, as evidenced by its Cinebench R23 multi-core score of 20755 and single-core score of 2930. The 3DMark 16-thread score of 6629 and max-thread score of 6627 indicate consistent scaling across all cores.
The CPU's percentile rank of 83 among all CPUs places it well above the GPU's 69th percentile, reinforcing that the GPU is the limiting component. The nearest CPU rival, the Ryzen 7 6800U, scores nearly identically (25706 vs. 25626 average, a -0.3% delta), while the Intel Xeon D-2752TER is 0.4% ahead and the Core 5 210H is 0.5% ahead. This tight grouping suggests that the 5700G's performance is typical for its class, and any of these CPUs would yield similar results in Overpower.
The CPU's 16 MB of L3 cache and 51.2 GB/s memory bandwidth are sufficient for the game's demands, as frame rates scale with GPU settings rather than CPU load. The fact that 1080p Low (116.1 FPS) and 1440p Low (108.1 FPS) show only a 7% difference indicates that the CPU can feed the GPU at these frame rates, but the GPU's pixel throughput becomes the bottleneck as resolution increases. The 5700G's integrated Radeon Vega 8 graphics are irrelevant here, as the discrete RX 6600 handles all rendering, but the CPU's 7 nm process and 65 W TDP contribute to a thermally efficient pairing that does not appear to throttle in the measured results.
Hardware Specifications
AMD Ryzen 7 5700G
AMD Radeon RX 6600
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5700G + AMD Radeon RX 6600 in Overpower
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 88.9 |
| 3840x2160 | Medium | 57.3 |
| 3840x2160 | High | 49.7 |
| 3840x2160 | Ultra | 42.1 |
| 2560x1440 | Low | 108.1 |
| 2560x1440 | Medium | 66.9 |
| 2560x1440 | High | 58.8 |
| 2560x1440 | Ultra | 52.4 |
| 1920x1080 | Low | 116.1 |
| 1920x1080 | Medium | 71.7 |
| 1920x1080 | High | 68.4 |
| 1920x1080 | Ultra | 55.0 |
Overpower with Ryzen 7 5700G + Other GPUs
See how Overpower performs with the same CPU but different graphics cards.
Overpower with RX 6600 + Other CPUs
See how Overpower performs with the same GPU but different processors.
Other Games with Ryzen 7 5700G + RX 6600
Explore FPS benchmarks for other games using this same hardware combination.