Downfall

The AMD Ryzen 7 5700G paired with the AMD Radeon RX 6600 delivers a playable but uneven experience in Downfall, with performance scaling that clearly shifts from CPU-bound at 1080p to GPU-bound at 4K. The data shows a combo that holds its own in the lower resolution tiers but struggles to maintain fluid frame rates when both resolution and quality settings are maxed out. Across all twelve measured configurations, the average frame rates range from a high of 176.2 FPS at 1080p Low to a low of 32.5 FPS at 4K Ultra, a spread of 143.7 FPS that illustrates the wide performance envelope of this hardware.

Resolution Scaling

The performance drop from 1080p to 4K is steepest at the highest settings, which indicates the GPU becomes the limiting component as pixel count increases. At Ultra settings, the average frame rate falls from 75.6 FPS at 1920x1080 to 53.4 FPS at 2560x1440, a reduction of 22.2 FPS, and then plunges to 32.5 FPS at 3840x2160, a further drop of 20.9 FPS. This pattern—where the 1440p to 4K transition costs nearly as much as the 1080p to 1440p transition—is classic evidence of the Radeon RX 6600’s 8 GB VRAM and 224.0 GB/s memory bandwidth being saturated by the higher pixel workload.

At Low settings, the scaling behavior is markedly different. The frame rate only drops from 176.2 FPS at 1080p to 127.3 FPS at 1440p, and then to 76.7 FPS at 4K. This suggests that at lower settings, the CPU has more headroom to feed the GPU, and the bottleneck shifts more gradually. The Ryzen 7 5700G’s 8 cores and 16 threads, with a boost clock of 4.60 GHz, are sufficient to keep frame rates high at 1080p Low, but the 4K Low result of 76.7 FPS indicates that even with minimal graphical load, the GPU cannot push past that threshold.

The Medium settings tier shows moderate scaling, with 144.5 FPS at 1080p, 101 FPS at 1440p, and 66.2 FPS at 4K. This represents a 54% reduction from 1080p to 1440p, then a 34% reduction from 1440p to 4K. The High settings tier behaves similarly, with 115.3 FPS, 83 FPS, and 50.3 FPS respectively. The fact that the 4K High result (50.3 FPS) is higher than the 4K Ultra result (32.5 FPS) but still below 60 FPS confirms that the GPU is the primary constraint at 4K regardless of settings.

Settings Recommendations

The best experience per the measured rows is at 1080p High, where the combo delivers 115.3 FPS. This sits comfortably above the 1440p High result of 83 FPS and the 4K High result of 50.3 FPS, making it the sweet spot for smooth gameplay without sacrificing visual quality. For players with 1080p displays, High settings are clearly the recommendation, as they provide more than double the frame rate of 4K Ultra while maintaining a substantial visual upgrade over Low.

At 1440p, the Medium preset (101 FPS) is the optimal choice, as it maintains triple-digit frame rates while the High preset drops to 83 FPS. The data shows that 1440p Ultra (53.4 FPS) dips below the 60 FPS threshold, making it less desirable for consistent smoothness. At 4K, the situation is more constrained. The Low preset (76.7 FPS) is the only configuration that exceeds 60 FPS, while Medium (66.2 FPS) is marginally playable. The 4K High result of 50.3 FPS and Ultra result of 32.5 FPS are both below the acceptable range for fast-paced horror, where frame drops can impact reaction time.

The scaling from Low to Ultra at each resolution shows diminishing returns. At 1080p, the jump from Low (176.2 FPS) to High (115.3 FPS) costs 60.9 FPS, while the jump from High to Ultra (75.6 FPS) costs 39.7 FPS. This suggests that High settings capture most of the visual fidelity without the steep performance penalty of Ultra.

How This Combo Ranks

The combo ranks 1385th out of 1741 tested combinations in Downfall, placing it in the bottom 20% of all tested hardware pairings. This ranking reflects the fact that while the individual components are competent—the CPU sits in the 83rd percentile of all processors and the GPU in the 69th percentile of all graphics cards—their combined performance in this specific title does not boost them above the pack. The low rank is primarily driven by the GPU’s limitations at higher resolutions, as the CPU alone demonstrates solid benchmark scores.

The Ryzen 7 5700G’s nearest rivals include the AMD Ryzen 7 6800U (0.3% lower average score), Intel Xeon D-2752TER (0.4% higher), Intel Core 5 210H (0.5% higher), and AMD Ryzen 5 7640U (0.6% higher). These margins are negligible, indicating that the CPU is well-matched against its immediate competitors. Similarly, the Radeon RX 6600 sits within 0.5% of its nearest rivals, which include the AMD Radeon 890M, AMD Radeon RX 580 2048SP, AMD Radeon RX 6700M, and NVIDIA GeForce RTX 3060 Ti. The performance parity among these GPUs means the combo’s rank is more a function of the game’s demands than a deficiency in this specific pairing.

Measured FPS Breakdown

At 1920x1080, the measured average frame rates are as follows: Low delivers 176.2 FPS, Medium delivers 144.5 FPS, High delivers 115.3 FPS, and Ultra delivers 75.6 FPS. This represents a full range of 100.6 FPS between the lowest and highest settings, with each tier stepping down by roughly 30 FPS from Low to High and then a steeper 39.7 FPS drop from High to Ultra.

At 2560x1440, the results are 127.3 FPS on Low, 101 FPS on Medium, 83 FPS on High, and 53.4 FPS on Ultra. The 1440p data shows a tighter spread of 73.9 FPS, with the Low to Medium step costing 26.3 FPS and the High to Ultra step costing 29.6 FPS. This suggests that the GPU begins to feel the load more evenly across settings at this resolution.

At 3840x2160, the frame rates compress further: 76.7 FPS on Low, 66.2 FPS on Medium, 50.3 FPS on High, and 32.5 FPS on Ultra. The total spread here is only 44.2 FPS, indicating that the GPU is consistently the bottleneck and that lowering settings provides diminishing returns. The 4K Ultra result is less than half of the 1080p Ultra result, underscoring the resolution’s heavy toll.

FAQ

*Q: Can this combo run Downfall at 4K smoothly?*

A: Only at Low settings, where it achieves 76.7 FPS. Medium settings yield 66.2 FPS, but High (50.3 FPS) and Ultra (32.5 FPS) both fall below the 60 FPS threshold.

Q: What is the best resolution for this hardware?

A: 1080p is the strongest resolution, with all settings except Ultra exceeding 100 FPS. The 1080p High preset at 115.3 FPS offers the best blend of visual quality and performance.

Q: How does the CPU compare to its closest rivals?

A: The Ryzen 7 5700G scores within 0.6% of its nearest competitors, including the AMD Ryzen 7 6800U and Intel Core 5 210H. Its 3DMark max threads score is 6627, and its Cinebench R23 multicore score is 20755.

Q: Is the GPU the limiting factor in this game?

A: Yes, especially at higher resolutions. At 4K, the frame rate drops by 44.2 FPS from Low to Ultra, while at 1080p the same settings change costs 100.6 FPS, showing the GPU struggles to maintain performance as pixel count rises.

*Q: What is the combo's overall rank in Downfall?*

A: It ranks 1385th out of 1741 tested combos, placing it in the lower 20% of all hardware pairings tested for this game.

Q: How much VRAM does the GPU have, and does it matter?

A: The GPU has 8 GB of GDDR6 memory with a 128-bit bus and 224.0 GB/s bandwidth. The large frame rate drops at 4K suggest this memory configuration is a limiting factor at high resolutions.

CPU Role

The AMD Ryzen 7 5700G is an 8-core, 16-thread processor based on the Zen 3 architecture, built on TSMC’s 7 nm process with 10,700 million transistors. Its base clock of 3.80 GHz and boost clock of 4.60 GHz provide strong single-threaded performance, evidenced by a 3DMark single-thread score of 899 and a Cinebench R23 single-core score of 2930. In multithreaded workloads, the CPU scores 20755 in Cinebench R23 multicore and 6629 in 3DMark 16-thread tests, indicating it is well-suited for games that leverage multiple cores.

In Downfall, the CPU’s role is most apparent at 1080p Low, where the frame rate reaches 176.2 FPS. This high result suggests that the CPU can feed the GPU effectively at lower resolutions. However, the 16 MB of L3 cache and dual-channel DDR4 memory support (51.2 GB/s bandwidth) are sufficient for this title. The CPU’s 83rd percentile ranking among all processors confirms its competence, but the combo’s overall rank in the game is dragged down by the GPU’s performance ceiling.

GPU Role

The AMD Radeon RX 6600 is built on the RDNA 2.0 architecture with the Navi 23 chip, featuring 1792 shading units, 112 TMUs, and 64 ROPs. It operates at a base clock of 1626 MHz, a game clock of 2044 MHz, and a boost clock of 2491 MHz. The 8 GB of GDDR6 memory runs at 1750 MHz with a 128-bit bus, delivering 224.0 GB/s of bandwidth. The GPU’s pixel rate is 159.4 GPixel/s, and its texture rate is 279.0 GTexel/s, with FP32 performance of 8.928 TFLOPS.

In Downfall, the GPU’s 69th percentile ranking reflects its mid-range positioning. The 4K results are particularly telling: the GPU’s 8 GB VRAM and 128-bit memory bus are strained at 3840x2160, where even Low settings only produce 76.7 FPS. The GPU’s performance at 1080p is much stronger, with High settings hitting 115.3 FPS, but the data shows that the card’s memory bandwidth becomes a bottleneck as resolution increases. The 28 ray tracing cores and DirectX 12 Ultimate support are present, but the game’s horror genre does not appear to leverage these features heavily based on the measured frame rates.