Overpower

The AMD Ryzen 5 5600F paired with the NVIDIA GeForce RTX 3070 delivers a solid 1080p and 1440p experience in Overpower, with 4K remaining viable at reduced settings. The benchmark data reveals a system where the GPU is the primary driver of performance, scaling predictably with resolution and settings, while the CPU provides ample headroom to keep frame rates high.

Resolution Scaling

The measured FPS data for this combination shows a clear and consistent drop in performance as resolution increases from 1920x1080 to 3840x2160. At the High preset, the average frame rate falls from 101 FPS at 1080p to 90 FPS at 1440p, before settling at 76 FPS at 4K. This represents a reduction of approximately 11% from 1080p to 1440p, and a further 16% drop from 1440p to 4K. The scaling pattern indicates that the RTX 3070 is the limiting component; as the pixel count increases, the GPU must work harder to fill each frame, resulting in a predictable performance penalty.

The trend is even more pronounced at the Low preset. Here, the average FPS is 174 at 1080p, 155 at 1440p, and 132 at 4K. The relative drop from 1080p to 4K is about 24%, which is a smaller percentage than at High settings. This suggests that at Low settings, the workload is less demanding on the GPU, allowing the frame rate to remain high, but the resolution scaling still reflects the GPU’s rendering limits. The difference between the Low and High presets at the same resolution also highlights the GPU’s role; at 1080p, the gap is 73 FPS (174 vs 101), while at 4K, the gap narrows to 56 FPS (132 vs 76), indicating that the GPU is less able to stretch its performance at higher resolutions.

Looking at the Medium preset, which is the only one with min and max FPS data, the averages are 109 FPS at 1080p, 97 FPS at 1440p, and 82 FPS at 4K. The minimum frame rates at these resolutions are 92, 82, and 70 FPS respectively, while the maximums are 125, 111, and 95 FPS. The spread between min and max FPS is consistent across resolutions, suggesting that the frame pacing remains stable even as the average drops. This resolution scaling behavior points directly to the GPU as the bottleneck; the CPU’s performance is not changing with resolution, yet the frame rates are falling, which means the RTX 3070’s rendering throughput is the deciding factor.

GPU Role

The NVIDIA GeForce RTX 3070 is built on the Ampere architecture with a GA104 chip manufactured on an 8 nm process from Samsung. It features 5888 shading units, 184 texture mapping units, and 96 raster operation pipelines. The GPU’s base clock is 1500 MHz, with a boost clock of 1725 MHz. Its memory subsystem consists of 8 GB of GDDR6 on a 256-bit bus, providing a bandwidth of 448.0 GB/s. These specifications directly influence the measured results in Overpower. The 8 GB VRAM capacity is sufficient for the tested resolutions and settings, as the data does not show any anomalous performance collapses that would indicate memory capacity issues.

The GPU’s raw compute power, rated at 20.31 TFLOPS for FP32 operations, is what drives the frame rates seen in the benchmarks. At 1080p Ultra, the average FPS is 84, while at 4K Ultra, it drops to 63. This 25% reduction in performance from 1080p to 4K is consistent with the GPU’s fillrate and shading limits. The pixel rate of 165.6 GPixel/s and texture rate of 317.4 GTexel/s are the theoretical limits that the measured results approach at higher resolutions. The RTX 3070’s performance percentile of 61 among all GPUs places it in the mid-to-upper tier, which aligns with its ability to handle 1440p High settings comfortably at 90 FPS.

The GPU’s nearest rivals, based on average benchmark scores, include the AMD Radeon RX 7600 XT, which scores 17083 with a delta of 0.7%, and the NVIDIA GeForce GTX 690, which scores 17037 with a delta of 1%. These comparisons show that the RTX 3070 is closely matched with the RX 7600 XT, and the measured game data reflects this competitive positioning. The RTX 3070’s boost clock of 1725 MHz is a key factor in its performance, as it allows the GPU to maintain high throughput during sustained gaming loads. The GPU’s end-of-life production status and launch MSRP of 499 USD are historical facts, but the current benchmark results indicate it remains a capable option for this title.

FAQ

Q: What is the average frame rate at 1080p with High settings?

A: The average frame rate at 1920x1080 with High settings is 101 FPS. This is the baseline for evaluating performance at higher resolutions.

Q: How much performance is lost when moving from 1080p to 4K at the High preset?

A: The average FPS drops from 101 at 1080p to 76 at 4K, which is a reduction of 25 FPS. This indicates a 24.8% decrease in performance.

Q: Does the RTX 3070 run out of VRAM in this game?

A: The data does not show any signs of VRAM-related stuttering or crashes. The 8 GB GDDR6 memory is adequate for the tested settings, as the minimum FPS at 1440p Medium is 82, which is still playable.

Q: What is the best resolution for maintaining a high refresh rate experience?

A: At 1440p with Low settings, the average FPS is 155, which is suitable for high refresh rate displays. At 1080p with Low settings, the average FPS is 174, offering even higher headroom.

Q: How does the RTX 3070 compare to its nearest rival, the AMD Radeon RX 7600 XT?

A: The RTX 3070 has an average benchmark score of 17208, while the RX 7600 XT scores 17083. This puts the RTX 3070 ahead by 0.7% in general benchmarks, although game-specific results may vary.

Q: What are the minimum frame rates at 4K with Medium settings?

A: The minimum FPS at 3840x2160 with Medium settings is 70, with an average of 82 FPS and a maximum of 95 FPS. This shows that 4K gameplay is possible, but with some dips below 75 FPS.

How This Combo Ranks

In the database of tested combinations for Overpower, this pairing of the AMD Ryzen 5 5600F and NVIDIA GeForce RTX 3070 holds a rank of 1237 out of 2980 total combos. This places it in the 58.5th percentile of all tested systems, meaning it outperforms more than half of the configurations but is not at the top end. The rank is a composite measure that accounts for the CPU and GPU’s individual capabilities and how they work together in this specific game.

The rank of 1237 suggests that while this combo is solidly mid-pack, there are many other systems that deliver higher frame rates. The RTX 3070’s individual percentile of 61 among GPUs is slightly higher than the combo’s overall rank, which implies that the CPU may be holding back performance in some scenarios, or that other combos with faster CPUs achieve better results. The Ryzen 5 5600F has a percentile of 85 among CPUs, indicating it is a strong processor, but the combo’s rank shows that the GPU is the more likely limiting factor in Overpower. Given that the data is measured, this rank is a reliable indicator of real-world performance for this specific pairing.

Measured FPS Breakdown

At 1920x1080, the measured frame rates across all settings are as follows: Low preset averages 174 FPS, Medium averages 109 FPS with a minimum of 92 and a maximum of 125, High averages 101 FPS, and Ultra averages 84 FPS. The progression from Low to Ultra shows a steady decline, with the most significant drop occurring between Low and Medium, representing a 65 FPS difference. This suggests that the Medium preset introduces substantial graphical effects that impact performance.

Moving to 2560x1440, the averages are 155 FPS at Low, 97 FPS at Medium (minimum 82, maximum 111), 90 FPS at High, and 75 FPS at Ultra. The scaling from 1080p to 1440p at each preset is roughly consistent: Low drops by 19 FPS, Medium by 12 FPS, High by 11 FPS, and Ultra by 9 FPS. This indicates that the GPU’s performance penalty is relatively uniform, but the absolute frame rates remain high enough for smooth gameplay at 1440p.

At 3840x2160, the averages are 132 FPS at Low, 82 FPS at Medium (minimum 70, maximum 95), 76 FPS at High, and 63 FPS at Ultra. The 4K results show that the Low preset is the only one that consistently maintains frame rates above 120 FPS. The Ultra preset at 4K, with an average of 63 FPS, is playable but may not be ideal for competitive play. The data across all resolutions and settings shows a clear pattern: the RTX 3070 is capable of high frame rates at lower resolutions, but 4K requires a compromise in settings to achieve acceptable performance.

Settings Recommendations

Based on the measured FPS data, the optimal balance of visual quality and performance for this combo is the High preset at 1440p. This configuration delivers an average of 90 FPS, which is smooth for most gaming scenarios, while still providing a high level of graphical fidelity. The High preset at 1080p also performs well at 101 FPS, but 1440p offers a better balance between resolution and frame rate for users with capable displays.

For users prioritizing maximum frame rates, the Low preset at 1080p achieves 174 FPS, which is ideal for high refresh rate monitors. At 1440p, the Low preset still delivers 155 FPS, making it a strong choice for competitive gaming. The Medium preset provides a reasonable middle ground, with 109 FPS at 1080p and 97 FPS at 1440p, but the jump to High is only a small performance cost for improved visuals.

At 4K, the Low preset is the recommended choice, as it yields 132 FPS, which is well above the 60 FPS threshold for smooth gameplay. The Medium preset at 4K drops to an average of 82 FPS, which is still playable, but the minimum of 70 FPS may result in occasional stutters. The Ultra preset at 4K, with an average of 63 FPS, is not recommended for a consistently smooth experience, as the minimum frame rate is not recorded but the average is close to the edge of playability. Overall, the data suggests that 1440p High is the sweet spot for this hardware combination.

CPU Role

The AMD Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture with the Vermeer codename. It has a base clock of 3.00 GHz and a boost clock of 4.00 GHz, with a 65 W TDP. The CPU’s cache hierarchy includes 64 KB of L1 per core, 512 KB of L2 per core, and 32 MB of shared L3 cache. These specifications are relevant to Overpower because the game’s performance at lower resolutions and settings is often limited by the CPU’s ability to feed the GPU with draw calls and game logic.

In the measured data, the CPU’s influence is most apparent when comparing frame rates across resolutions. At 1080p Low, the average FPS is 174, which is a high number that could be constrained by the CPU’s single-thread performance. The PassMark single-thread score for this CPU is 2872, and its multithread score is 19236. These scores indicate that the CPU is capable of handling the game’s demands, but the boost clock of 4.00 GHz is the key factor in maintaining high frame rates. The CPU’s percentile of 85 among all CPUs places it in the top 15% of processors, which supports its ability to keep up with the RTX 3070.

The CPU’s nearest rivals include the Intel Core Ultra 5 225 with a score of 36938 and a delta of 0%, and the AMD Ryzen 5 5500X3D with a score of 37018 and a delta of -0.2%. These comparisons show that the 5600F is closely matched with its peers, and in Overpower, the CPU is not the primary bottleneck. The data shows that the frame rate drops as resolution increases, which would not happen if the CPU were the limiting factor. Therefore, the CPU provides a stable foundation, while the GPU determines the final frame rates across different settings and resolutions.