Barony

The AMD Ryzen 5 5600F paired with the NVIDIA GeForce RTX 3070 delivers a remarkably consistent experience in Barony, with the data showing a clear progression of performance that scales predictably with both resolution and graphical preset. Benchmark results indicate that this combination is exceptionally well-suited for high-refresh-rate play, even at 4K, where the average frame rates remain comfortably above the 60 FPS threshold on most settings.

FAQ

Q: What is the highest average frame rate recorded for this combo in Barony?

A: The highest average frame rate in the measured data is 385 FPS, achieved at 1920x1080 resolution with Low settings.

Q: How does the Ryzen 5 5600F compare to its nearest rival, the Intel Core Ultra 5 225, in overall CPU benchmarks?

A: The AMD Ryzen 5 5600F has an average benchmark score of 36945, which is essentially tied with the Intel Core Ultra 5 225's score of 36938, showing a deltaPct of 0.

Q: What is the minimum FPS recorded for this combo at 2560x1440 with Medium settings?

A: At 2560x1440 resolution with Medium settings, the minimum FPS recorded is 154, with an average of 181 FPS and a maximum of 208 FPS.

Q: What is the VRAM capacity of the GPU in this combo, and what type of memory does it use?

A: The NVIDIA GeForce RTX 3070 features 8 GB of GDDR6 memory on a 256-bit bus, providing a memory bandwidth of 448.0 GB/s.

Q: In the overall ranking for Barony, what position does this specific CPU and GPU combination hold?

A: The combo ranks 1230 out of 2935 tested combinations, placing it in the upper half of all tested systems for this game.

Q: What is the thermal design power (TDP) of the CPU in this system?

A: The AMD Ryzen 5 5600F has a TDP of 65 watts, which is a figure that aligns with its 6-core, 12-thread configuration based on the Zen 3 architecture.

Settings Recommendations

The measured FPS data provides a clear roadmap for the optimal settings in Barony for this hardware combination. The primary goal is to maintain a fluid and responsive experience, and the data shows that this system can achieve that at almost every preset. For players with high-refresh-rate 1080p monitors, the Ultra preset, yielding an average of 176 FPS, is the best choice, as it provides a substantial visual upgrade over Medium (287 FPS) while still delivering frame rates far beyond what most displays can show. The jump from Medium to Ultra does cost about 111 FPS on average, but the resulting 176 FPS is still exceptionally high, making the visual fidelity increase worthwhile.

At 2560x1440, the recommendation shifts to the High preset, which delivers an average of 155 FPS. This strikes the ideal balance between the 181 FPS of Medium and the 111 FPS of Ultra. The 1440p High preset offers a significant improvement in visual quality over 1080p while maintaining a frame rate that is high enough to fully utilize a 144Hz monitor. Choosing Ultra at this resolution would still be playable, but the 44% drop in average FPS compared to High makes it a less compelling option for competitive or fast-paced play.

For 4K gaming at 3840x2160, the High preset is the clear sweet spot, producing an average of 81 FPS. This is the highest quality setting that consistently stays above the 60 FPS threshold, which is crucial for smooth gameplay. While the Medium preset offers a higher average of 95 FPS, the drop to High is relatively small (about 15%), and the visual improvement is typically more noticeable at this resolution. The Ultra preset at 4K, with an average of 58 FPS, dips below the ideal 60 FPS mark and is best avoided unless a player prioritizes maximum detail over frame rate consistency.

GPU Role

The NVIDIA GeForce RTX 3070 is the primary driver of performance in Barony as resolution and graphical demands increase. Its 8 GB of GDDR6 memory on a 256-bit bus, with a bandwidth of 448.0 GB/s, provides ample resources for this roguelike title. The GPU's boost clock of 1725 MHz and its 5888 shading units allow it to handle the game's rendering tasks efficiently. The data shows a clear correlation between the GPU's workload and frame rates: as settings increase from Low to Ultra, the average FPS drops consistently at every resolution, a pattern that is characteristic of a GPU-bound scenario.

The RTX 3070's performance in this game places it in the 61st percentile of all GPUs, with an average benchmark score of 17208. Its nearest rival, the AMD Radeon RX 7600 XT, scores 17083, a negligible 0.7% difference. This indicates that the 3070 is a solid mid-to-high-range performer. In Barony, the GPU is not a bottleneck at lower resolutions, as evidenced by the massive 385 FPS average at 1080p Low. However, its influence becomes more pronounced at higher settings, particularly at 4K Ultra, where the average frame rate drops to 58 FPS, showing that the GPU is working near its limit to maintain visual fidelity.

How This Combo Ranks

In the specific context of Barony, the combination of the AMD Ryzen 5 5600F and the NVIDIA GeForce RTX 3070 achieves a rank of 1230 out of 2935 tested combinations. This places it in the 58th percentile of all systems tested for this game, meaning it outperforms more than half of the other configurations. This ranking confirms the balanced nature of this pairing, as neither component appears to be a significant bottleneck for the other in this title.

The rank is particularly noteworthy given the CPU's standing in general benchmarks. The Ryzen 5 5600F sits in the 85th percentile of all CPUs, while the RTX 3070 is in the 61st percentile of all GPUs. The fact that the combo's in-game rank is between these two figures suggests that Barony is more dependent on the GPU than the CPU, but still benefits from the strong single-threaded performance of the Ryzen 5 5600F. This balanced profile makes the system a reliable performer that scales well across different resolutions without any dramatic performance cliffs, as evidenced by the smooth gradient of FPS values in the measured data.

CPU Role

The AMD Ryzen 5 5600F, a 6-core, 12-thread processor from the 5000 series, provides the computational foundation for this system. Its base clock of 3.00 GHz and boost clock of 4.00 GHz, combined with the Zen 3 architecture, ensure that the game logic, AI, and physics calculations are handled without becoming a limiting factor. The 32 MB of shared L3 cache is a significant asset for gaming, as it helps to reduce memory latency and improve overall responsiveness. The CPU's Passmark single-thread score of 2872 is a strong indicator of its ability to handle the primary game thread efficiently.

The CPU's performance in the overall system is demonstrated by its average benchmark score of 36945, which places it in the 85th percentile of all CPUs. In the data from Barony, the CPU's role becomes most apparent at lower resolutions and settings. For instance, at 1080p Low, the system achieves 385 FPS. While this is a very high number, the fact that it is not even higher suggests that even at this resolution, the CPU is working to keep up with the GPU's frame generation. As resolution increases to 4K, the GPU becomes the dominant factor, and the CPU has more headroom, which is why the FPS drop is more gradual between settings at 4K compared to 1080p. The CPU's 65-watt TDP also indicates it is a power-efficient part that won't produce excessive heat in a system.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of this combo's performance across three resolutions and four settings. At 1920x1080, the system is exceptionally fast. The Low preset produces an average of 385 FPS, Medium produces 287 FPS (with a min of 244 and max of 330), High produces 246 FPS, and Ultra produces 176 FPS. This demonstrates that at 1080p, the system is rarely constrained, and even the most demanding preset yields frame rates suitable for the fastest gaming monitors.

Moving to 2560x1440, the performance remains very strong but shows a predictable decline. The Low preset averages 243 FPS, Medium averages 181 FPS (with a min of 154 and max of 208), High averages 155 FPS, and Ultra averages 111 FPS. These numbers show that the system can easily handle 1440p at high refresh rates, with even the Ultra preset staying well above the 100 FPS mark. At 3840x2160, the system still delivers playable performance. The Low preset averages 127 FPS, Medium averages 95 FPS (with a min of 80 and max of 109), High averages 81 FPS, and Ultra averages 58 FPS. The 4K results indicate that while the system is capable of 4K gaming, users will need to make a trade-off between visual fidelity and frame rate, with High being the most balanced option.

Resolution Scaling

The FPS data reveals a clear and consistent pattern when scaling from 1080p to 4K. With High settings, the average FPS drops from 246 at 1920x1080 to 155 at 2560x1440, a 37% reduction, and then to 81 at 3840x2160, a 48% reduction from the 1440p figure. This indicates that the GPU is the primary scaling factor, as the workload increases significantly with each step up in resolution. The same pattern holds for the Low and Medium presets, showing that the system's performance is heavily influenced by the GPU's rendering load.

This scaling behavior is a clear indicator that the system is not CPU-bound in Barony. If the CPU were the limiting factor, the FPS would be more consistent across resolutions. The fact that FPS drops by roughly a third to a half with each resolution increase points to a system where the GPU's pixel and texture processing capabilities are the main determinants of performance. The RTX 3070's 8 GB of VRAM and 448.0 GB/s of bandwidth are sufficient for the game's demands, as there are no signs of severe performance stutters or crashes in the data. The smooth, predictable scaling suggests a well-optimized game engine and a hardware combination that works harmoniously, with the GPU becoming the sole limiting component as the resolution increases.