Overpower

Resolution Scaling

The measured FPS data for the AMD Ryzen 5 5600 paired with the Intel Arc B580 in Overpower reveals a clear pattern of scaling across the three tested resolutions. At 1920x1080 with High settings, the combo produces 73.2 FPS. Moving to 2560x1440 drops this to 63.4 FPS, a reduction of 9.8 FPS. At 3840x2160, the average falls further to 52.6 FPS. This progression shows that the performance penalty from 1080p to 1440p is about 13.4%, while the jump from 1440p to 4K costs another 17%. The overall drop from 1080p to 4K at High settings is approximately 28.1%.

The scaling story changes when looking at lower settings. At Low settings, the combo achieves 123.8 FPS at 1080p, 113.1 FPS at 1440p, and 93.8 FPS at 4K. The relative drops are smaller in percentage terms: 8.6% from 1080p to 1440p, and 17.1% from 1440p to 4K. This suggests that at Low settings, the system is less constrained by raw pixel throughput and more balanced across components.

Ultra settings tell a different tale. The frame rates are 57.5 FPS at 1080p, 53.3 FPS at 1440p, and 43.8 FPS at 4K. The drop from 1080p to 1440p is only 7.3%, while the drop from 1440p to 4K is 17.8%. The relatively modest decline between 1080p and 1440p at Ultra indicates that the rendering workload at these resolutions is not saturating the GPU entirely; the limiting factor shifts more toward computational overhead than memory bandwidth or pixel fill.

Medium settings produce the following: 78.9 FPS at 1080p, 71.9 FPS at 1440p, and 61.4 FPS at 4K. The 1080p-to-1440p drop is 8.9%, and the 1440p-to-4K drop is 14.6%. Across all four settings presets, the pattern is consistent: the largest absolute FPS losses occur between 1440p and 4K, which points to the GPU's pixel throughput becoming the dominant constraint at higher resolutions.

The data indicates that at 1080p, the Ryzen 5 5600's six cores and twelve threads are adequately feeding the Arc B580. The CPU's 3.50 GHz base clock and 4.40 GHz boost clock, combined with 32 MB of shared L3 cache, provide enough instruction throughput to keep the GPU occupied. At 4K, however, the GPU's 13.67 TFLOPS of FP32 performance and 456.0 GB/s of memory bandwidth become the primary factors, as evidenced by the steeper FPS declines.

How This Combo Ranks

The AMD Ryzen 5 5600 + Intel Arc B580 combination holds a combo rank of 1353 out of 1744 tested combos in Overpower. This places it in the lower-middle portion of the database, meaning roughly 22.4% of tested configurations perform worse, while 77.6% perform better. The percentile position reflects the pairing's mixed strengths: the CPU is a capable mid-range part, but the GPU's overall benchmark percentile is 66, which is moderate rather than exceptional.

Looking at the CPU's nearest rivals provides context for its contribution. The AMD Ryzen 5 5600 has an average benchmark score of 21765, which sits 0.6% above the Intel Xeon D-1746TER (21635) and 0.6% below the AMD EPYC 9554P (21899). It is also 0.9% above the AMD EPYC 9534 (21900) in the opposite direction, though the deltaPct values show the differences are marginal. The Intel Core i7-11700F (21957) is 0.9% faster, but none of these rivals represent a significant gap. This CPU ranks in the 79th percentile among all CPUs, indicating it is a solid performer in isolation.

For the GPU, the Intel Arc B580 has an average benchmark score of 23021, placing it 0.1% above the AMD Radeon 760M (22999) and 0.3% above the NVIDIA P106-100 (22950). It trails the NVIDIA GeForce RTX 4060 (23181) by 0.7% and leads the NVIDIA GeForce RTX 4060 Mobile (22729) by 1.3%. The GPU's 66th percentile among all GPUs suggests it is a mid-tier component. The combination of a 79th-percentile CPU with a 66th-percentile GPU results in a combo rank that is below what the CPU alone might suggest, indicating the GPU is the bottleneck in many scenarios.

The measured FPS data supports this ranking. At 1080p Ultra, the combo achieves 57.5 FPS, which is playable but not exceptional. The fact that the combo ranks 1353rd out of 1744 suggests that many other pairings deliver higher frame rates in Overpower, likely due to more powerful GPUs or better CPU-GPU balance.

FAQ

Q: What is the highest average FPS achievable with this combo in Overpower?

A: The highest measured average FPS is 123.8, achieved at 1920x1080 with Low settings.

Q: How does the combo perform at 4K with Ultra settings?

A: At 3840x2160 with Ultra settings, the combo produces an average of 43.8 FPS, which is the lowest measured result across all tested configurations.

Q: What is the frame rate difference between High and Ultra at 1440p?

A: At 2560x1440, the High preset delivers 63.4 FPS, while the Ultra preset delivers 53.3 FPS, a difference of 10.1 FPS.

Q: Is the CPU or GPU more likely to limit performance at 1080p?

A: At 1080p, the CPU's 79th percentile ranking and the GPU's 66th percentile ranking suggest the GPU is the limiting factor, as the FPS differences between settings presets are more pronounced than resolution scaling alone would indicate.

Q: What is the combo's overall rank among tested configurations?

A: The combo ranks 1353 out of 1744 tested combos in Overpower.

Q: How does the GPU compare to the NVIDIA GeForce RTX 4060 in average benchmark score?

A: The Intel Arc B580 scores 23021, which is 0.7% lower than the NVIDIA GeForce RTX 4060's 23181.

Measured FPS Breakdown

The measured FPS data covers four settings presets at three resolutions, providing a complete grid of twelve data points. At 1920x1080, the Low preset yields 123.8 FPS, Medium yields 78.9 FPS, High yields 73.2 FPS, and Ultra yields 57.5 FPS. The gap between Low and Medium is substantial at 44.9 FPS, while the gap between Medium and High is only 5.7 FPS, and the gap between High and Ultra is 15.7 FPS.

At 2560x1440, the numbers shift downward. Low produces 113.1 FPS, Medium produces 71.9 FPS, High produces 63.4 FPS, and Ultra produces 53.3 FPS. The Low-to-Medium gap narrows to 41.2 FPS, while the Medium-to-High gap is 8.5 FPS, and the High-to-Ultra gap is 10.1 FPS. The pattern suggests that the Medium preset offers a reasonable compromise between visual quality and performance at this resolution.

At 3840x2160, the results are as follows: Low yields 93.8 FPS, Medium yields 61.4 FPS, High yields 52.6 FPS, and Ultra yields 43.8 FPS. The Low-to-Medium gap is 32.4 FPS, the Medium-to-High gap is 8.8 FPS, and the High-to-Ultra gap is 8.8 FPS. At 4K, the differences between Medium, High, and Ultra are relatively consistent, each costing roughly 8-9 FPS.

Comparing across resolutions at the same settings, the Low preset shows the smallest absolute declines: 10.7 FPS from 1080p to 1440p, and 19.3 FPS from 1440p to 4K. The High preset shows declines of 9.8 FPS and 10.8 FPS respectively. The Ultra preset shows declines of 4.2 FPS and 9.5 FPS respectively. The Medium preset shows declines of 7.0 FPS and 10.5 FPS respectively. These numbers indicate that the Low preset is the most resolution-sensitive, while the Ultra preset is the least resolution-sensitive in absolute terms, though the percentage drops are similar.

GPU Role

The Intel Arc B580's specifications play a direct role in the measured results. The GPU has 12 GB of GDDR6 memory on a 192-bit bus, providing 456.0 GB/s of bandwidth. This memory configuration is sufficient for Overpower's demands at 1080p and 1440p, but at 4K Ultra, the 43.8 FPS result suggests the GPU is working near its limits. The 2560 shading units and 80 ROPs contribute to a pixel rate of 213.6 GPixel/s, which explains the relatively smaller FPS drops at Ultra settings between 1080p and 1440p.

The GPU's clock speeds are notable: both base and boost are listed at 2670 MHz, which is a fixed clock rather than a variable boost. This steady clock behavior likely contributes to consistent frame pacing across the measured scenarios. The memory clock of 2375 MHz (19 Gbps effective) provides the bandwidth needed to feed the 160 TMUs, which deliver a texture rate of 427.2 GTexel/s.

The GPU's FP32 performance of 13.67 TFLOPS places it in a mid-range tier, as reflected in its 66th percentile ranking. The nearest rivals show it is competitive: 0.1% above the AMD Radeon 760M, 0.3% above the NVIDIA P106-100, and 0.7% below the NVIDIA GeForce RTX 4060. The 1.3% lead over the NVIDIA GeForce RTX 4060 Mobile indicates that desktop variants of similar GPUs perform closely.

The 190 W TDP and the PCIe 4.0 x8 bus interface are relevant to how the GPU interacts with the Ryzen 5 5600. The CPU supports PCIe Gen 4 with 20 lanes, so the x8 connection is fully utilized. The GPU's 12 GB VRAM is unlikely to be a limiting factor at the tested resolutions, as even 4K Ultra typically fits within this capacity for a game of Overpower's scope.

Settings Recommendations

Based on the measured FPS data, the optimal settings preset depends on the target resolution and desired frame rate. At 1920x1080, the High preset (73.2 FPS) offers a better balance than Medium (78.9 FPS) when considering the visual fidelity gain, while Ultra (57.5 FPS) drops below the 60 FPS threshold. For players prioritizing smoothness, the Low preset at 123.8 FPS provides maximum headroom, but the Medium preset at 78.9 FPS is likely the best compromise for most users at this resolution.

At 2560x1440, the High preset (63.4 FPS) is the only setting above 60 FPS besides Low (113.1 FPS). The Medium preset (71.9 FPS) actually exceeds High in frame rate, which is counterintuitive but reflects the measured data. However, the High preset likely offers better visual quality per frame rate. The Ultra preset at 53.3 FPS is below the 60 FPS target and may exhibit noticeable stutter on standard 60 Hz displays.

At 3840x2160, the situation is more constrained. The Low preset (93.8 FPS) is the only option that provides a comfortable margin above 60 FPS. The Medium preset (61.4 FPS) barely clears 60 FPS, making it a viable choice for 4K gaming if the visual quality improvement is worth the reduced headroom. The High preset (52.6 FPS) and Ultra preset (43.8 FPS) both fall below 60 FPS, which may result in a less fluid experience.

The data suggests that for this combo, the Medium preset is the most versatile across resolutions: it delivers 78.9 FPS at 1080p, 71.9 FPS at 1440p, and 61.4 FPS at 4K. These are all above the 60 FPS threshold, making Medium the recommended setting for users who want a consistent experience without adjusting presets per resolution. For those who prioritize visual quality over frame rate, the High preset at 1080p (73.2 FPS) and 1440p (63.4 FPS) is acceptable, but at 4K, users should expect to use Medium or Low to maintain playable performance.