Overpower

Resolution Scaling

The recorded data for Overpower shows a clear and predictable scaling pattern as resolution increases. At 1080p with Ultra settings, the combo delivers 65 FPS average. Moving to 1440p Ultra drops that to 58 FPS, and at 4K Ultra it falls to 49 FPS. The percentage drop from 1080p to 4K at Ultra is approximately 25%, which indicates the GPU is the primary limiting factor at higher resolutions, but the CPU still has enough headroom to keep frame rates playable even at 4K.

Looking at the Low preset, the scaling is more dramatic. At 1080p Low, the system produces 134 FPS. At 1440p Low, that drops to 120 FPS, a decline of about 10%. At 4K Low, the average falls to 102 FPS, another 15% reduction from the 1440p result. The Low preset data reveals that even at the lowest settings, the GPU workload grows substantially with resolution, but the frame rates remain high enough to suggest the CPU is not the bottleneck at any resolution when settings are low.

The Medium preset shows the tightest frame time behavior. At 1080p Medium, the average is 84 FPS with a minimum of 71 and maximum of 97. At 1440p Medium, the average drops to 75 FPS with a minimum of 64 and maximum of 86. At 4K Medium, the average is 64 FPS with a minimum of 54 and maximum of 73. The consistent gap between minimum and maximum frames across resolutions, roughly 26 FPS at each step, indicates a stable frame pacing pattern that does not degrade disproportionately as resolution increases.

For the High preset, the numbers are 78 FPS at 1080p, 69 FPS at 1440p, and 59 FPS at 4K. This represents a 24% reduction from 1080p to 4K, which is the smallest relative drop among all presets. The High preset appears to balance GPU load in a way that minimizes resolution sensitivity, likely because the settings do not push memory bandwidth as hard as Ultra does.

The resolution scaling analysis shows that this combination is GPU-bound at 4K across all presets. The CPU, with its six cores and twelve threads, provides enough throughput to feed the GPU even at 4K Ultra where the average remains above 45 FPS. The data suggests that users targeting 4K should expect playable performance on Medium, with High being borderline and Ultra requiring compromises.

CPU Role

The AMD Ryzen 5 5600 is a six-core, twelve-thread processor based on the Zen 3 architecture, code-named Vermeer. It operates with a base clock of 3.50 GHz and a boost clock of 4.40 GHz, with a thermal design power of 65 watts. The processor includes 64 KB of L1 cache per core, 512 KB of L2 cache per core, and a shared 32 MB L3 cache. Its memory bandwidth is rated at 51.2 GB/s over a dual-channel DDR4 interface.

In Overpower, the CPU's role is most visible when examining the Low preset frame rates. At 1080p Low, the system achieves 134 FPS, which is more than double the 4K Ultra result of 49 FPS. This gap cannot be attributed to the GPU alone, as the GPU's rendering workload at 4K Ultra is significantly higher. The CPU's single-thread performance, measured at 882 in 3DMark single-thread and 2584 in Cinebench R23 single-core, provides the per-core throughput needed to maintain high frame rates when GPU load is low.

The processor's multi-threaded capabilities, shown in a Cinebench R23 multi-core score of 18309 and a Geekbench multi-core score of 9158, suggest that Overpower does not fully utilize all twelve threads. If the game were heavily multi-threaded, the frame rate differences between Low and Ultra settings would be smaller, because the CPU would become the bottleneck regardless of GPU settings. The data shows the opposite: frame rates scale strongly with resolution and settings, which means the CPU has enough headroom to let the GPU be the limiting factor.

The Ryzen 5 5600 sits in the 74th percentile among all CPUs in the database, with an average benchmark score of 20468. Its nearest rivals include the Intel Core Ultra 7 258V with a delta of 0.1%, the AMD Ryzen 5 8500G with a delta of 0.2%, and the AMD EPYC 9454P also with a delta of 0.2%. This indicates that the CPU's overall compute performance is competitive with much more expensive parts, though in Overpower specifically, the game's demands are more modest than the CPU's full capabilities.

The processor's 32 MB shared L3 cache is relevant for game performance. Overpower's data shows that at 1080p Medium, the minimum frame rate of 71 FPS is only 13 FPS below the average of 84 FPS. This relatively tight frame time distribution suggests that cache hits are consistent enough to avoid major stutters, which can occur when a CPU's cache is too small for the game's working set.

GPU Role

The AMD Radeon RX 6650 XT uses the Navi 23 chip built on RDNA 2.0 architecture with a 7 nm process. It has 2048 shading units, 128 texture mapping units, and 64 raster output units, along with 32 ray tracing cores. The GPU operates at a base clock of 2055 MHz, a game clock of 2410 MHz, and a boost clock of 2635 MHz. Memory consists of 8 GB of GDDR6 on a 128-bit bus, providing 280.3 GB/s of bandwidth.

The GPU's memory configuration is the most critical factor in Overpower at higher resolutions. At 4K Ultra, the average frame rate drops to 49 FPS, and at 4K High it is 59 FPS. The gap between High and Ultra at 4K is 10 FPS, while the same comparison at 1080p shows a 13 FPS difference (78 FPS High versus 65 FPS Ultra). The smaller absolute difference at 4K suggests that the GPU's 8 GB VRAM capacity is being stressed more heavily at 4K Ultra, which could lead to memory pressure that reduces the benefit of higher settings.

The GPU's pixel rate of 168.6 GPixel/s and texture rate of 337.3 GTexel/s indicate the raw throughput available for rendering. At 4K Medium, the system produces 64 FPS, which is close to the 4K High result of 59 FPS. This small gap between Medium and High at 4K, only 5 FPS, shows that the GPU is nearing its fill-rate limit at this resolution. In contrast, the difference between Medium and High at 1080p is 6 FPS (84 versus 78), a similar absolute gap but a smaller relative one, indicating that the GPU has more headroom at lower resolutions.

The GPU's FP32 performance of 10.79 TFLOPS places it in the 65th percentile among all GPUs in the database, with an average benchmark score of 19765. Its nearest rivals include the NVIDIA Tesla K40m with a delta of -0.6%, the AMD FirePro D300 with a delta of 0.7%, and the AMD FirePro W7000 with a delta of -0.7%. These rivals are professional workstation cards, which suggests the RX 6650 XT's gaming-oriented design delivers competitive raw compute in synthetic benchmarks but is tuned differently for real-time rendering.

The ray tracing cores on this GPU, 32 in total, do not appear to have a measurable impact on Overpower's frame rates based on the recorded data. The game's genre as an action title, combined with the frame rate patterns across settings, indicates that the rasterization pipeline is the primary workload. The GPU's DirectX 12 Ultimate support and Vulkan 1.4 capability provide the API compatibility needed for modern game engines, but the benchmark results do not show any settings that would specifically stress ray tracing features.

How This Combo Ranks

The combination of the AMD Ryzen 5 5600 and AMD Radeon RX 6650 XT ranks 2415 out of 3713 tested combos in Overpower. This places the combo in the 35th percentile, meaning roughly two-thirds of all tested combinations deliver higher frame rates in this game. The ranking reflects the GPU's mid-range positioning more than the CPU's capabilities, since the CPU's percentile ranking is much higher at 74.

The combo's rank is driven by the GPU's limitations at higher settings. At 4K Ultra, the system produces 49 FPS, which is below the 60 FPS threshold that many games target. The 1080p Ultra result of 65 FPS is more respectable, but still below the frame rates delivered by higher-tier GPU combinations in the database. The gap between this combo and top-ranked combinations is significant, as the 2415 rank places it in the lower half of the distribution.

The CPU's strong synthetic benchmarks, including a PassMark multi-thread score of 21541 and a Geekbench multi-core score of 9158, do not translate into a higher combo ranking because Overpower's frame rates are GPU-limited. This is confirmed by the resolution scaling data: the combo loses only 25% performance from 1080p to 4K at Ultra settings, which is a smaller drop than would be expected if the CPU were also a bottleneck. A CPU-bound system would show larger frame rate drops at higher resolutions because the CPU cannot keep up with the GPU's increased workload.

The combo's position in the database suggests that users seeking higher frame rates in Overpower would need to either reduce settings or accept lower resolutions. The data shows that at 1080p Medium, the combo delivers 84 FPS, which is above the 60 FPS threshold and provides a smooth experience. At 1440p Medium, the 75 FPS result is also playable. The 4K results are the weakest point, with only the Low preset exceeding 100 FPS.

Settings Recommendations

Based on the measured frame rates, the Medium preset offers the best balance of visual quality and performance across all resolutions. At 1080p Medium, the average is 84 FPS with a minimum of 71 FPS, which provides consistent frame pacing. At 1440p Medium, the average drops to 75 FPS with a minimum of 64 FPS, still above the 60 FPS threshold. At 4K Medium, the average is 64 FPS with a minimum of 54 FPS, which is borderline but playable for most users.

The High preset is a viable alternative for users who prioritize visual fidelity over frame rate. At 1080p High, the average is 78 FPS, which is only 6 FPS below Medium. At 1440p High, the average is 69 FPS, a 6 FPS drop from Medium. At 4K High, the average is 59 FPS, which falls below the 60 FPS threshold but remains close enough that most users would not notice a significant difference.

The Ultra preset should be avoided at 4K, where the average falls to 49 FPS. Even at 1080p Ultra, the 65 FPS average is below the Medium preset's 84 FPS, and the visual improvements from Ultra over High are typically marginal in action games. The Low preset, while delivering high frame rates (134 FPS at 1080p, 120 FPS at 1440p, 102 FPS at 4K), sacrifices too much visual quality for the performance gain.

The frame time data from the Medium preset shows the most consistent behavior. At 1080p Medium, the range from minimum to maximum is 26 FPS (71 to 97). At 1440p Medium, the range is 22 FPS (64 to 86). At 4K Medium, the range is 19 FPS (54 to 73). The narrowing range at higher resolutions indicates that the GPU's workload becomes more uniform, reducing frame time variance even as average FPS drops.

For users with 1080p monitors, the Medium preset at 84 FPS is the recommended starting point, with High as an option if the display supports higher refresh rates and the user prefers sharper textures. For 1440p users, Medium at 75 FPS is the safest choice, with High being acceptable for users who do not mind occasional drops below 70 FPS. For 4K users, the Medium preset at 64 FPS is the only setting that maintains an average above 60 FPS, and users should accept the 54 FPS minimum as the worst-case scenario.

FAQ

Q: What is the best resolution and settings combination for this system in Overpower?

A: The Medium preset at 1440p delivers 75 FPS average with a 64 FPS minimum, providing the best balance of visual quality and performance. At 1080p Medium, the average rises to 84 FPS, and at 4K Medium it drops to 64 FPS, so 1440p Medium offers the most consistent experience across the resolution spectrum.

Q: Is the CPU or GPU the limiting factor in this game?

A: The GPU is the limiting factor at all resolutions and settings. The evidence is that frame rates scale strongly with resolution and settings, dropping from 134 FPS at 1080p Low to 49 FPS at 4K Ultra. If the CPU were the bottleneck, the frame rates would be more consistent across resolutions because the CPU workload does not change with rendering resolution.

Q: How does this combo compare to other tested combinations?

A: This combo ranks 2415 out of 3713 tested combos in Overpower, placing it in the lower half of the distribution. The CPU itself ranks in the 74th percentile among all CPUs, but the GPU ranks in the 65th percentile, which drags the overall combo ranking down because the game is GPU-bound.

Q: Can this system handle 4K gaming in Overpower?

A: Yes, but only at Medium settings, where the average frame rate is 64 FPS with a minimum of 54 FPS. At High settings, the average drops to 59 FPS, and at Ultra it falls to 49 FPS. The Low preset at 4K delivers 102 FPS, but the visual quality is significantly reduced.

Q: What frame rates can I expect at 1080p?

A: At 1080p Low, the average is 134 FPS. At Medium, the average is 84 FPS with a minimum of 71 FPS. At High, the average is 78 FPS. At Ultra, the average is 65 FPS. The Medium preset provides the best combination of frame rate and visual quality at this resolution.

Q: How does the CPU's performance compare to its nearest rivals?

A: The Ryzen 5 5600 has an average benchmark score of 20468, which is 0.1% higher than the Intel Core Ultra 7 258V, 0.2% higher than the AMD Ryzen 5 8500G, and 0.2% higher than the AMD EPYC 9454P. These small deltas indicate that the CPU's compute performance is closely matched with several other processors in the database.